Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
25 Jun 2026, 2:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
LP
2 conditions · 1 needing a document upload
QUALIFYING REQUIREMENTS OF TENDERERS : i) The Railway reserves the right to order either the entire or the bulk quantity on the RDSO Approved vendors (Item ID 3100249, Sub Item ID 3100249003). Status of approval of tenderer shall be reckoned as on the date of tender opening and not thereafter, unless it is a case of downgrading/ removal/suspension/ banning. ii) The quantities to be ordered on Approved Vendors will be decided considering factors which include past (supply as well as quality) performance, capacity, delivery requirements, quantity under procurement, and nature of item, outstanding order quantity etc. and the tender conditions. iii) Vendors approved for developmental ordering shall be eligible for developmental order of up to 20% of Net Procurable Quantity [NPQ] in regular tenders. iv) Where there is no approved vendor for an item, developmental vendors can be considered for placement of bulk order without any quantity restrictions. However, while considering such vendors, factors including past performance, capacity, delivery requirements, quantity under procurement, nature of item, outstanding order load etc. shall be considered in a transparent manner, subject to rates being reasonable. Quantity allocation among eligible vendors shall be based on pre-decided tender criteria. v) Authorized dealers/ distributors need to quote with Tender specific authorization from the approved vendors/developmental vendors/manufacturers, failing which offer will be summarily rejected. While issuing such authorizations the approved vendors/developmental vendors/manufacturers must ensure that these authorized dealers/distributors are in a position to raise inspection requests on IREPS.
Annexure-l (Attached with the tender) : The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-l. Non- submission of above certificate by the bidder shall result in summary rejection of his/ their bid. It shall be mandatorily incumbent upon the tenderer to identify state and submit the supporting documents duly self-attested/ digitally signed by which they/ he is qualifying the Qualifying Criteria mentioned in the Tender Document. It will not be obligatory on the part of Tender Committee/ Accepting Authority to scrutinize beyond the submitted document of tenderer as far as his qualification for the tender is concerned. The bidder shall be mandated to submit Annexure-l.
26 conditions · 1 needing a document upload
Offers validity : The offer should be kept valid for 90 days from the date of opening of the tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Firm must be GST registered with concerned statutory authorities, otherwise offer will be summarily rejected. All the bidders / tenderers should ensure that they are GST compliant and their quoted tax structure rates are as per GST Law. In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the Railway shall deduct the applicable GST from his/her/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
2 conditions
Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
1 location across Assam · 10,890 Numbers total
Straight PG Metal Thread End Fitting PG & Tube clamp galvanized steel with rubber & A set of Metal threaded End fitting & Straight PG Metal Thread End Fitting PG & Straight Polyamide metal thread
DB265409
DB265409
Open - Indigenous
Goods
Assam
₹0
Exempted
25 Jun 2026
8 Jun 2026
8 items · 10,890 Numbers total
Straight PG Metal Thread End Fitting PG-11, fit to conduit size NW -12, with hexagonal metric lock nut made of nickel plated brass with suitable O-ring Annexure - A, Table- A2, S.No.2 as per Spec. No. R DSO/PE/SPEC/AC-0138-2009,( REV-1) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr.Section Engineer/Air Conditioned/NFR/DBRT/WS, NFR | Assam | 300.00 Numbers |
| Total | 300 Numbers | |
Tube clamp galvanized steel with rubber, Fit to conduit size NW48 as per Annex-A, Tab A8, S r no. 8 of Specification no. RDSO/PE/SPEC/AC/0138-2009 (Rev-1) along with suitable Screw M6X25 Hex hea d MS yellow zinc plating with nut [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr.Section Engineer/Air Conditioned/NFR/DBRT/WS, NFR | Assam | 1200.00 Numbers |
| Total | 1,200 Numbers | |
Tube clamp galvanized steel with rubber, Fit to conduit size NW23, as per Annex-A, Tab A8, Sr no.- 5 of Specification no. RDSO/PE/SPEC/AC/0138- 2009 (Rev-1) along with suitable Screw M6X25 Hex h ead MS yellow zinc plating with nut [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr.Section Engineer/Air Conditioned/NFR/DBRT/WS, NFR | Assam | 3120.00 Numbers |
| Total | 3,120 Numbers | |
Tube clamp galvanized steel with rubber, fit to conduit size NW 36 as per Annexure -A,Table -A8, Sl. No. 7 of RDSO Specification No. RDSO/PE/SPEC/AC/0138-2009 (Rev.1) along with suitable screw M6x 25 mm Hex head MS yellow Zinc Plating with nut [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr.Section Engineer/Air Conditioned/NFR/DBRT/WS, NFR | Assam | 2280.00 Numbers |
| Total | 2,280 Numbers | |
A set of Metal threaded End fitting of size PG 36 (Table A 2 Item no 7) wih HexagonalLock Nut of Nickel plated Brass thread size PG 36(Table A10 Item no.7) with gasket andOring conforming to RDSO sp ecification no.RDSO/PE/SPEC/AC-0138-2009(Rev-1).All are in assembled condition.Make: As per RDSO appr oved vendor list. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr.Section Engineer/Air Conditioned/NFR/DBRT/WS, NFR | Assam | 440.00 Numbers |
| Total | 440 Numbers | |
Straight PG Metal Thread End Fitting PG-48 with Lock Nut , ANNEXURE- A, Table- A2,S.No.8, a s per Spec. NO. RDSO/PE/SPEC/AC-0138-2009,( REV-1) [ Warranty Period: 30 Months after the date of del ivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr.Section Engineer/Air Conditioned/NFR/DBRT/WS, NFR | Assam | 150.00 Numbers |
| Total | 150 Numbers | |
Straight Polyamide metal thread End fitting thread size: PG16 fits to conduit size NW17 with Hexagonal metric Locknut made of nickel plated brass with suitable O-Ring and Washer confirming to RDS O Specification. No. RDSO/PE/SPEC/AC/0138-2009 (Rev-1) Annexure-A, Table A-2, Sr.No.3. Note:Item to be supplied in assembled condition. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr.Section Engineer/Air Conditioned/NFR/DBRT/WS, NFR | Assam | 1900.00 Numbers |
| Total | 1,900 Numbers | |
Straight PG Metal Thread End Fitting thread size: PG-21 fit to Conduit Size NW-23 with Hexag onal metric lock nut made of nickel plated brass with suitable O Ring and washer as per Annexure A, Table A-2, S.No.5 conforming to RDSO Specification No: RDSO/PE/SPEC/AC/0138-2009 (REV.1) Note:Item to be su pplied in assembled condition [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr.Section Engineer/Air Conditioned/NFR/DBRT/WS, NFR | Assam | 1500.00 Numbers |
| Total | 1,500 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5753400.pdf
ATTACHMENT
5795794.pdf
ATTACHMENT
5753407.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .