REPAIR AND PAINTING OF STEEL FURNITURE FD TP MAP AT 7 AFH KANPUR

Amount

Chair Varandah (FD 256 & 359 ) :-

Removing old unserviceable canning of chair verandah and M & L re-canning of Chair Varandah mat pattern with new plastic cane having size 4 to 5 mm wide and 0.5 mm thick half round cream/white colour confirming to sample kept in Furniture Yard and of make specified complete all as specified and directed.

Removing of unserviceable shoe and S & F new PVC hard shoes to chair verandah complete all as specified and directed by Engr-in-Charge.

M & L for Painting of Chair Varandah with two coats of white synthetic enamel paint after preparing of surfaces by scraping with suitable grade of sand paper complete all as specified and directed .

Table Office Officer steel (FD 1003) :-

Removing old unserviceable top of table office officer (steel) and S & F new top of 18 mm thick prelaminated MDF board veneered teak face one side and other face balancing white, exterior grade with 4mm thick teak wood beading around the top complete all as specified and directed.

Taking out unserviceable drawer of table office officer (steel) and S & F new drawer made of 1mm thick MS sheet complete all as specified and directed by Engr-in-Charge.

Removing old unserviceable damaged legs and S & F New leg made of 25 mm square hollow pipe with 1.6 mm thick MS sheet complete all as specified and directed .

Removing of unserviceable shoe and S & F new PVC hard shoes to table office officer (steel) complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable lock from the drawer / mobile pedestal unit of Table officer/executive of any shape and any size and S & F new lock as per trade pattern matching with existing shape and size of approved quality complete all as specified and directed.

Taking out unserviceable telescopic channel from the drawers/mobile pedestal unit of Table officer/executive of any make, any shape and any size and S & F new channel as per trade pattern matching with existing shape and size of approved quality complete all as specified and directed.

Taking out unserviceable lock from table office officer (steel) and S & F new lock matching with existing shape & size with duplicate key of approved quality complete all as specified and directed .

M & L for Painting of table Office Officer with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with suitable grade of sand paper complete all as specified and directed Engr-in-Charge Make : Berger/Asian/ Shalimar.

Table office Clk (steel) (FD 1004) :-

Removing old unserviceable top of table office clk (steel) and S & F new top of 18 mm thick prelaminated MDF board veneered teak face one side and other face balancing white, exterior grade .prelaminated MDF board veneered teak face one side and other face balancing white, exterior grade with 4mm thick teak wood beading around the top complete all as specified and directed.

Taking out unserviceable drawer of table office clk steel and S & F new drawer made of 1 mm thick MS sheet complete all as specified and directed .

Removing unserviceable damaged leg and S & F New leg made of 25 mm square hollow pipe with 1.6 mm thick MS sheet complete all as specified and directed by Engr- in-Charge.

Removing of unserviceable shoe and S & F new PVC hard shoe to table office clk (steel) complete all as specified and directed .

Taking out unserviceable lock from table office clk (steel) and S & F new lock matching with existing shape & size with duplicate key of approved quality complete all as specified and directed .

M & L for Painting of table office clk (steel) with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with suitable grade of sand paper complete all as specified and directed

Repair to table 900x600x760mm with /without drawer (steel) (FD 1008 &1007) :-

M & L for repair to table 900 mm x 600 mm x 760 mm with/without drawer (steel) by welding of conduit frame wherever required including strengthening etc, removing old/unserviceable worn out existing top and S & F new top of 18/19mm thick pprelaminated MDF board veneered teak face one side and other face balancing white, exterior grade including 4mm thick Ist class Hard Wood Shisham beading all round the top fixed with suitable size of screws complete all as specified and directed.

Taking out old unserviceable leg of table 900 mm x 600 mm steel with/without drawer and S & F New leg made of 25 mm square hollow pipe with 1.6 mm thick MS sheet of existing shape and size complete all as specified and directed.

All as per item no.4.02 here-in-before but for short rail.

All as per item no. 4.02 here-in-before but for long rail.

Removing of unserviceable drawer of table 900 mm x 600 mm with drawer steel and S & F New drawer made of 1 mm thick MS sheet same shape and size complete all as specified and directed.

All as per item No 4.02 here-in-before but for stiffener.

Removing old unserviceable rubber shoe and S & F new rubber shoe in each table complete all as specified and directed.

M & L for Painting of of table 900 mm x 600 mm x 760 mm with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with suitable grade of sand paper complete all as specified and directed.

Table Steel 900x900x760mm (FD 1009 & TP) :-

Taking out old unserviceable existing top from Table Steel (900 mm x 900 mm x 760 mm) and S & F new top made of 18 mm thick prelaminated MDF board veneered teak face one side and other face balancing white, exterior grade with 4mm thick teak wood beading around the top complete all as specified and directed.

Taking out old unserviceable existing stiffner S & F 25 mm square hollow MS tube of 1.6 mm thick, 1100 mm long cross stiffener to table dinning of size 900 mm x 900 mm x 760 mm steel at 8” (inch) below from top frame by welding complete all as specified and directed.

Removing of unserviceable Shoe from leg of Table Steel 900 mm x 900 mm x 760 mm and S & F of new PVC shoe of the same shape and size complete all as specified and directed.

M & L for Painting of of table Steel 900 mm x 900 mm x 760 mm with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with suitable grade of sand paper complete all as specified and directed.

Chair CBA Steel /CBB Steel( FD 75(M):-

Removing old existing unserviceable seat & back of chair CBA/CBB Steel and S & F new seat/back of seasoned sheesham wood duly Canned with ½ round plastic cane 2mm wide, 0.4mm thick and border with 3.5mm wide, 0.5mm thick for chair CBA /CBB steel complete all as specified and directed.

S & F new mild steel cleats of size 50 mm x 25 mm x 3 mm by welding to the frame in replacement of old unserviceable cleat complete all as specified and directed.

Removing of old existing unserviceable cap and S & F new PVC cap for chair steel tubular with arms complete all as specified and directed.

Removing of unserviceable shoe and S & F new hard rubber shoe to chair steel tubular with arms with appropriate steel screw complete all as specified and directed.

Removing of old unserviceable arm and S & F new arm with seasoned sheesham wood fixed with steel screw of appropriate size complete of Chair CBA steel with Arms complete all as specified and directed.

Removing of existing paint by scraping with abrasive cloth / sand paper, preparation of steel surfaces and painting with two coats of OG synthetic enamel paint on steel surface complete all as specified and directed.

Teapoy Verandah (FD 255) :-

Taking out unserviceable top from Teapoy Verandah and S & F New top made out of 19 mm thick prelaminated MDF board veneered teak face one side and other face balancing white, exterior grade provided with 4 mm thick teak wood beading all around the top duly polished & repairing the entire frame including welding if required complete all as specified and directed.

Taking out unserviceable rubber shoes from Teapoy Verandah and S & F new rubber shoes of best quality matching with the existing shape & size complete all as specified and directed.

S & F 350 mm long , 25 mm square hollow pipe with 1.6 mm thick MS sheet welded with two legs making a stiffener both side of teapoy varandah and 750mm long, 25 mm square hollow pipe with 1.6 mm thick MS sheet as center stiffener welded with both side of stiffeners of teapoy varandah complete all as specified and directed.

Almirah large/Med steel with shelves (FD 1031 & 1032) :-

Taking out existing unserviceable locks almirah large / medium steel and S & F new lock of six levers of existing shape & size with duplicate keys complete all as specified and directed.

Taking out broken/damaged handle of almirah large/med steel and S & F new handle of mild steel chromium plated of existing shape complete all as specified and directed.

Taking down existing unserviceable shelf of almirah large steel and S & F new shelf made of 1 mm thick mild steel of existing shape and size complete all as specified and directed.

Ditto all as per item 8.03 here-in-before but for shelf of almirah medium steel.

Taking out old unserviceable door hinges from almirah large/medium steel and S & F new door hinges mild steel 75/80 mm long complete all as specified and directed.

Taking down unserviceable locking device & rod set from almirah large steel and S & F new locking device & rod set of existing shape and size complete all as specified and directed.

Ditto all as per item 8.06 here-in-before but for locking device & rod set of almirah medium steel.

Dismantling of unserviceable leg of almirah large steel and S & F new leg made of 1 mm thick mild steel sheet of existing shape and size complete all as specified and directed.

Ditto all as per item 8.08 here-in-before but for leg of almirah medium steel.

Taking out unserviceable lock from almirah large/medium steel of any shape and size and S & F new lock matching with existing shape & size with duplicate key complete all as specified and directed.

M & L for painting to following items by spray machine on both side (outer and inner surfaces) including legs, door shutter, partition, drawers and shelves with one coat of OG synthetic enamel paint including preparation of old painted surfaces & applying readymade putty wherever required to fill up the cavities complete all as specified and directed:

Almirah Large Steel(FD 1031 / FD -1033 & FD/E6/MAP/18)

Almirah Med steel (FD 1032)/MAP

Chair revolving office officers high back / executive with PU arm (TP) :-

Taking out unserviceable caster wheel from any type of chair revolving high back executive and S & F new caster wheel of different type as per trade pattern matching with the existing shape & size complete all as specified and directed Engr-in-Chage.

Taking out unserviceable tapestry/fabric cloth from seat & back of chair revolving high back executive and S & F new tapestry/fabric cloth of approved quality & shade including replacement of foam cushion and plywood etc. complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hand rest from chair revolving high back executive and S & F new hand rest of different type as per trade pattern matching with the existing hand rest complete all as specified and directed Engr-in-Charge.

Taking out of Hydrualic Assembly from Chair revolving office officer high back/executive with PU arm and S & F new Hydrualic assembly different type as per trade pattern with the existing shape and size having Warrantee period one year complete all as specified and directed by Engr-in-Charge.

Chair revolving cum computer with or without arm/off size/any type ( TP) : -

Taking out unserviceable caster wheel from any type of chair revolving and S & F new caster wheel of different type as per trade pattern matching with the existing shape & size complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable tapestry/fabric cloth from seat & back of chair revolving and S & F new tapestry cloth of approved quality & shade including replacement of foam cushion and plywood etc. complete all as specified and directed by Engr-in-Charge.

Taking out of Hydrualic Assembly Form Chair revolving High back/Low back/Med back/Computer and S & F new Hydrualic assembly different type as per trade pattern with the existing shape and size complete all as specified and directed Engr-in-Charge.

Taking out unserviceable hand rest from chair revolving and S & F new hand rest of different type as per trade pattern matching with the existing hand complete all as specified and directed Engr-in-Charge.

Taking out unserviceable base Form Chair revolving High back/Low back/Med back/Computer and S & F new base different type as per trade pattern with the existing shape and size complete all as specified and directed Engr-in-Charge.

Charpoy GI Pipe PLYTOP (FD 220):-

Removing of unserviceable long rails from Charpoy GI Pipe and S & F new long rail made out of 32mm dia GI pipe medium grade complete all as specified and directed.

Removing of unserviceable short rails from charpoy GI pipe and making of two short rails obtained from execution of item No 12.01 here-in-before and fixing the same in charpoy including cutting threads on both ends complete all as specified and directed.

Removing of unserviceable legs from charpoy GI pipe making legs from short rails obtained from execution of item No 12.02 here-in-before and fixing the same in charpoy including cutting, threading on one end and S & F clamps as per drawing for FMN set complete all as specified and directed.

Removing old unserviceable 3 way GI elbow and S & F new three way elbow of 32 mm dia, ISI marked medium grade complete all as specified and directed.

Removing old unserviceable GI check nut and S & F new GI check nuts of 32 mm dia 6mm thick ISI marked complete all as specified and directed.

S & F flat iron 220 mm long of size 25 mm x 6 mm welded in each corner of charpoy with long rail & short rail duly one hole in each flat iron and apply one coat of black paint over a coat of red oxide primer and fixing by 6 mm dia 1 ½” long bolt of flat head with nut complete all as specified and directed.

S & F flat iron 850 mm long of size 32 mm x 6 mm at equal distance of long rail of charpoy duly two Nos holes in each iron flat and apply one coat of black paint over a coat of red oxide primer and fixing of ply by 6mm dia 1 1/2" long hole of flat head with nut complete all as specified and directed.

Removing of existing Ply top 12 mm thick BWR from GI charpoy ply top /newar and tightening the frame, loose laying charpoys components i.e. check nuts, elbows, rails, legs etc and S & F ply wood 12 mm thick BWR grade of size as per drawing including 10 Nos. GI nuts & bolts with 6 mm dia and 75 mm long, GI washer complete all as specified and directed.

Welding of various steel furniture :- M & L for welding of broken steel parts of various steel furniture by electric welding (welding up to 25mm considering a single point) as and where required complete all as specified and directed.

Shoe Rack steel (FD/MAP/02(R)):-

Removing of unserviceable shoe and S & F new PVC hard shoes complete all as specified and directed.

M & L for painting of Shoe Rack Steel with two coats of Black Synthetic enamel paint after preparing of surfaces by scraping with abrasive cloth/ sand paper of suitable grade complete all as specified and directed.

Chair School with hand board(FD/E6/MAP/ 05) :- Taking out the old existing unserviceable following parts of Chair steel and S & F new parts of the same complete with the help of approprirate nuts, bolts and washers complete all as specified and directed :

PVC seat

Writing Pad

M & L for painting of Chair school with hand board with two coats of black synthetic enamel paint after preparing of surfaces by scraping with abrassive cloth/sand paper of suitable grade complete all as specified and directed.

Painting of Furnitures:- M & L for preparation of old painted surfaces including applying ready made putty wherever required to fill up the cavities and painting by spray machine on both side (outer and inner surfaces) including legs, door shutter, partition, drawers and shelves with one coat of OG synthetic enamel paint (Ist quality) complete all as specified and directed for the following items:-

Rack steel 3 tier (FD 1039)

Table bed side steel with locker (MAP/15(R))

Filing cabinet Steel (FD 125(M)) & TP

Rack side 3 tray steel

Stool steel 305 mm x 305 mm x 610 mm (FD 1023 (M))

kailash brothers

Star Sofa House

S B ENTERPRISES

GUJRAL BUILDERS

SARGAM ENTERPRISES