TN04-01/25-26-AGAMT-II-Nallagu

Amount

Construction of Anganwadi Building at Nallagudlahalli H/O Nallagudlahalli

1. EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated 1 earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc., Complete

2. Supplying and Filling foundation and basement with filling sand in layers not more than 2 15cm. Thick well ramed, watered and compacted Complete complying with stanard specification.

3. Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

4. Cement concrete 1:4:8 mix using 40mm HBG metal for foundation including watering 4 wherever necessary and laid in layers of not more than 15cm thick., compacting etc.. complete complying with standard specifications and as directed

5. Cement concrete 1:2:4 mix using 20mm metal including cost and Conveyance of all site etc. Complete.

6. Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

7. Supplying & Erecting centering for sides & soffiots including necessary supports & 7 strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle Column

Basement to Top of Parapet

Lintel, Roof Beam, Roof Slab-Ceiling, Bottom

Sunshade

8. Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding 8 cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs

9. Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all 9 Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

10. Finishing the exposed surface of RCC item of work such as slabs beams, sunshade, facia, 10 canopy slab, staircase waist slab etc., with CM 1:3, 10mm thick. etc., complete complying with standard specifications and as directed by the departmental officers.

11. Plastering with CM 1:4, 20mm thick.over the cement concrete for floor finish including 11 curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.

12. Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

13. Weathering course concrete using best quality broken brick jelly of size 20mm in pure 13 slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required deas

14. Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2em of 14 approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth

15. Paving the floor with scratch proof design ceramic tiles of any colour and any size laid in 15 CM 1:3, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly completed.

16. Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick including finishing the joints neatly con sleted.

17. Dadooing walls with Colour Glazed tiles of any colour and any size laid in CM 1:2, 10mm 17 thick, and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard.

18. Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1:2:4 mix using 10-12mm ISS HBG metal and the top rubed 18 smooth etc., complete complying with standard specification as directed.

19. Distembering two coats using best approved Interiar oil destember with one coat primer 19 over New plastered Surface including cost and conveyance of materials and labour charges etc complete

20. Painting Two Coats Approved Plastic Emultion Paint with one coat primer over New 20 Cement Plastered surface including cost and conveyance of materials and labour charges etc complete.Schedule ItemNo.359-B)

21. Black Board Paint Two Coats with Approved Cement Paint over Cement Plastered surface including cost and conveyance of materials and labour charges ets complete.

22. Painting two Coats over New iron Works using best quality of enamel paint including cost 22 and conveyance of materials and labour charges etc complete.

23. Supply and Cost of Steel door, Window, Ventilator Door D (1.10x 2.40m)

Door D1 (0.75 x 1.50m)

Door D2 (0.90 x 2.40m)

Windows (1.20 x 1.60m)

Ventilator (0.90x0.45m)

Jolly (0.60x0.45m)

24. Fixing Charges of Steel doors, windows and ventilators Door D (0.90x 2.40m)

Windows (1.20 x 1.60m) Ventilator (0.90x0.45m)

25. Supply and fixing of Cuddappa Slab 25mm Thick including cost and Conveyance of all site 25 etc. Complete.

26. Provision for Electrification Arrangements a) Light & Fan Point SD.No.23

b) Supply & Fixing of Tube Light SD.No88

c) CFI SD.No

d) BHF with CFL SD.No 83

e) Supply & Fixing of Street Light SD.No.94

f) Supply & Fixing of Fan SD.No110

g) Plug Point SD.No 36

h) s & Fixing DP Main switch SD.No 142

i) S & Fixing TNEB Meter board SD.No.125

j) Service pipe SD.No.73

k) Service Connection SD.No.68

l) Service charge EB

m) Supply & Fixing of Exhaust Fan SD 114

27. Provision of Water Arrangement 1000 Ltr Tank

50mm PVC pipeline

50mm PVC Bend

25m PVC pipe

25mm PVC Elbow

25mm PVC Tee

28. Provision for RO water Arrangement

29. Supplying and Fixing PVC Rainwater down fall pipe of 100mm dia with necessary shoes, bends & Clamps etc., Outer

30. Provision for RWHS

31. Provision of Wash basin

32. Provision of EWC

33. Provision of Baby IWC

34. Provision towards Drawings

35. Provision towards Name Board

36. Provision for QC Charge 0.50%

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

P.CHINNASAMY CONTRACTOR (BID ID -1313681)