SPECIAL REPAIR TO BLDG NO P1/2A AND T23 OF HQ J AND B SUB AREA AND SPECIAL REPAIR TO CONNECTING PATH TO PARKING IN FRONT OF NEW OPD COMPLEX AT MH DANAPUR UNDER GE DANAPUR CANTT

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed

Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises complete all as specified.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

M&L for Non -Skid Ceramic coloured tiles (joint free) 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm , in floors etc over and including15mm thick screed bed in cement mortar 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in skirting / dado with and including over 10mm thick rendering in CM 1:4 set & jointed in neat cement slurry and pointed with white or coloured cement to match complete.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm and not exceeding 0.11 sqm in floors etc with and including over 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed with white or coloured cement to match complete.

M&L Machine cut Kota stone slab flooring 20-25mm thick as in riser, steps & skirting, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing, polishing & rounding to edges complete incl 15mm thick plaster in CM 1:4 complete all as specified.

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

M & L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough for laying of kota stone/tile complete all as specified and directed.

M&L for Coloured glazed ceramic tiles (450 x 300)x 6 to 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar 1:4 complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base, mass concrete etc. complete.

M&L for 75mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

M&L PCC 1:2:4 type B1 20mm graded stone aggregates for insertion of hold fasts including necessary form works complete all as specified and directed.

Taking down cement plaster on brick / concrete wall etc incl racking out joints, hacking for key and scrubbing down with water complete all as specified and directed.

M & L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked.

M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:4), finished even and smooth (without using extra cement ) complete.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

All as per above item No 22.00 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc fitted to chowkhat complete all as specified and directed

S & F of 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.

S & F for Flush shutters 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer with including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed.

~Ditto~ all as per Srl item No. 28.00 above but without glazing bar

S & F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing with and including, fixing of hold fast size 25 x 5 mm of flat iron etc and over including one coat of primer complete all as specified and directed.

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed.

S & F pressed steel frame of size 105mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast hinges, lock strike plates etc., complete all as specified and directed.

S & F pressed steel frame of size 125mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast hinges, lock strike plates etc., complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar work including necessary form work as required complete all as specified and directed.

S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 75mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing in SSR-2020 Part II complete all as specifed and directed.

S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter & kitchen cupboard shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2020 print) complete all as specified and directed.

SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 75 mm complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.

S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F extruded Aluminium alloy handles, anodized 150 mm size comp ISI Marked complete all as specified and directed

S&F extruded Aluminium alloy handles, anodized 100 mm size comp ISI Marked complete all as specified and directed

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete as directed by Engr-in-charge

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete.

S&F 3 mm thick sheet glass, ordinary quality, and glazing with oil putty in square/rectangle n exc 0.50 sqm in each pane, complete all as specified and directed

~Ditto~ all as per Srl item No 50.00 above but figured glass. complete all as specified and directed

S&F in repair 18/19 mm thick Block baords, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed

S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 25 mm dia of any colour with bracket as approved complete.

Taking up or down steel tubing and connections 15 mm bore GI tubing complete all as specifed and directed.

Taking up or down steel tubing and connections 20 mm bore GI tubing complete all as specifed and directed.

S & F 15 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F 20 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed

S&F in repair vitreous china WHB size 605x430x200 mm under counter basin including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern of size 580 x 440 mm white, with integral foot rest, 'P' or 'S' trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall , complete all as specified and directed.

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed.

S&F in repair cast copper alloy CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repairs PVC connection 15mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed.

S&F in repair bib tap 15mm cast copper alloy chromium plated long body with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repair 15 mm bore Florentineswan neck pillar taps complete all as specified and as directed. Make Jaquar (Model No FLR-CHR-5357N or equivalent

S&F in repair brass CP tubular towel rail 20 mm dia "D" type 60 cm long between flangecomplete all as specified and directed

S&F in repairs stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed.

S & F as in repair 15 mm dia angle cock, chromium plated, cast copper alloy, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair of stainless steel soap dish, of standerd size and shape complete all as directed

S & F in repair brass chromium plated shower rose fancy type with swivel joints ,125 mm dia with CP arms 300 mm long including fixing to steel pipe or union complete all as specifiedand directed.

M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded stone aggregate) incl necessary form work complete all as specified and directed .

M&L for 18 to 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F MS TMT bars, 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches of 110 mm dia complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches of 75 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches of 50 mm bore complete all as specified and directed.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete.

S & F PVC (SWR) bends any radius of 110 mm dia complete all as specified and directed.

S & F PVC (SWR) bends any radius of 110 mm dia provided with access door complete all as specified and directed.

S & F PVC (SWR) bends any radius of 75 mm dia provided with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L preparation new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat primer complete all as specified and directed

M&L preparation of old plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed.

S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed

S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed

M&L for 8 mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in Framed work complete all as specified and directed.

Dismantling corrugated or semi corrugated Asbestos Cement (AC) sheets/GI corrugated, semi corrugated sheet in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by E-in-Charge

S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410W Grade E 250 complete all as specified and as directed.

M&Lsand filling under floors laid in layers n. exc 15cm thick spread ,levelled and rammed including watering all as specified and as directed.

M&L for vitrified heavy duty (dura stone) tiles 300x300x9 to 10 mm thick in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

M & L powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, indows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

S&F for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

Excavation over areas not exceeding 1.50 m deep and getting out in soft / loose soil complete all as specified and directed.

M&L for hard core of broken stone gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed by Engineer-in-Charge.

M&L 300mm dia Reinforced concrete pipes, class NP2, laid and jointed on concrete bed including PCC 1:4:8 type D-2( 40mm graded crushed stone aggregate) packing under and haunching against the side of pipe after they are laid and tested complete with collars all as specified and directed

M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complet as required complete all as specified and directed.

M&L 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete.

M & L for preparing old plastered or previously untreated walls including complete removal of existing tretment and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Dismantling of pressed precast concrete interlocking paver block of any thickness laid dry and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

Laying only 80 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size laid in path,porch,hard standing or flooring etc conforming to IS-15658-2006, M-40 grade over and including 50 mm thick layer of sand cushioning, except interlocking paver block complete all as specified and directed . ( Note : Machine pressed precast concrete interlocking paver block will be use retrived from Item No 122 Above)

Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for one light/fan point complete all as specified and directed.

All as per item no 127above but one 5 Amps socket out let point controlled by one switch on same board with other switches.

All as per item no 127 above but one 5 Amps socket out let point on independent board controlled by one switch.

All as per item no 4 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.

Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.

Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply and fixing for batten/angular fittings complete all as specified and directed.

Supply and fix LED Lamp 7/8 watt complete all as specified and directed.

Supply and fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply and fixing double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed .

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply and fixing MCB TPN 50 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing LED lights fitting 1x20 Watt , 220V, AC decorative box type with driver, holder including LED tube rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all accessories internally pre wired fixed to wall/ceiling incl fittings accessories all as specified. Make- Havells/Bajaj/Philips/Crompton.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and as directed. Make: Crompton/ Bajaj/Havells.

Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 60 watt 240 volts AC 50 Hz , IP 66 protection suitable for bracket complete all as specified and directed. Make: Havells/CG/PHILIPS/BAJAJ

M & L for security wall light bracket made out of GI pipe light grade 25/40 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling one complete all as specified and as directed.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit including PVC insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete. (Note: three run of copper conductor and one run of PVC conduit measured as one unit )

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame with wire mesh and grouting with nut , bolts & Fastenar on the wall and making hole in existing wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper wire upto ceiling rose complete all as specified and directed . Make: Crompton/ Bajaj/Havells/Usha.

Taking down fan, ceiling fan cable, dismantling blades and removing fan and blades to store and after cleaning Refixing of the same with replacement of multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal complete all as specified and as directed.

Taking down and refixing of existing electric water heater and safe custody to user/ MES yard in concerned officer and after work Refixing as per existing same with proper connection as per guided by Engg-in-charge.

Supply and fixing of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete

Taking down ceiling fan/exhaust fan/wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store/yard of AGE E/M or User, complete all as specified and as directed

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4.0 Sqmm size with multistranded copper conductor, drawn in but ecluding non metallic rigid PVC conduit 20mm/25mm bore including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 2.5 Sq mm nominal area and drawing into suitable size of PVC non metalic rigid heavy duty PVC conduit of white. ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 2.5 sqmm (NOMINAL AREA) Stranded copper conductor FRLS cable as earth wire comlete all as specified as directed. Note:- Two runs of 2.5 sqmm cable, one run of 2.5 sqmm cable and one run of PVC conduit will be measured as one unit

Supply and fixing of down rod for ceiling fan made out of 15 mm dia MS pipe complete with holes and MS srip clamp with slotted or threaded upto 1.5 m long with clamp for fixing with ceiling all as per site requirement specified and directed by Engg-in-charge.

Refixing of the same ceiling fan/exhaust fan or wall fan after cleaning with replacement of multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal complete all as specified and as directed.

AASHIRWAD ENTERPRISES

M/S Priya Trading Agency

J K CONSTRUCTION

M/S SAROJ KUMAR SINGH

HARINANDAN RAI SONS

jaglalchoudharyandsons

MS BIJAY KUMAR AND SONS