EXTENSION OF BUILDING NO. P-104 SMC AND PROVISION OF COVERED SHED AT MT SECTION INCLUDING SPECIAL REPAIRS TO EXISTIING PIPELINE WITH CPVC PIPELINE IN CERTAIN SMQ (PHASE-I) AND ALLIED WORKS SERVICES AT AIR FORCE STATION MOUNT ABU RAJASTHAN

Amount

Excavating trenches in hard soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed.

Removing excavated material to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point for soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm using excavated soil complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs,roof projection,chajjas, landings and similar work n. exc 200mm thick (horizontal/sloping) for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished Square, rectangular or polygonal surface of concrete complete all as specified and directed.

M&L for Reinforced Cement Concrete Design Mix M-25 Grade using of 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; basesfor columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced Cement Concrete Design Mix M-25 Grade using of 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced Cement Concrete Design Mix M-25 Grade using of 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L for Reinforced Cement Concrete Design Mix M-25 Grade using of 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for 10 mm dia and over mild steel TMT bars as in reinforcement cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire annealed n.exc 0.9mm or with securing clips etc complete all as specified and directed.

M&L for 6 to 8 mm dia mild steel TMT bar as in reinforcement, cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire annealed n.exc 0.9mm or with securing clips etc complete all as specified and directed.

M&L for 5mm dia and over mild steel TMT bar as in reinforcement, strips, spacers and binders, cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire annealed n.exc 0.9mm or with securing clips etc complete all as specified and directed.

M&L for brick work built in cement mortar (1:6) using sub class 'B' old size bricks curved or straight in plan exc 6m mean radius complete all as specified and directed.

Earth filling under floors in layers not exceeding 25cm thick spreading and levelling including watering and well ramming complete all as specified and directed.

M&L for hard core broken stone or boulders of gauge not exceeding 63mm, deposited, spread and leveled in layer not exceeding 20 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick cement concretre (1:2 :4) type B-2 using 40 mm graded stone aggregate as in flooring and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete cast-in-situ (1:3:6) type C-1 using of 20 mm graded stone aggregate as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed.

M&L for 15mm thick rendering cement plaster in cement mortar (1:4) on surfaces of fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement mixed with 3% integral water proofing compound by weight of cement complete all as specified and directed. Note:- Water proofing compoundshall be measured and paid for as 'supply only' separately).

M&L for 10mm thick rendering cement plaster in cement mortar (1:4) on uneven faces of concrete surfaces in ceilings and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering cement plaster in cement mortar (1:3) mixed with water proofing compound on uneven faces of concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound ISI marked.

Supply only Integral water proofing compound ISI marked.

Preparing new plastered surfaces of walls and applying 3mm thick readymixed wall care putty on entire surface of wall etc cutting,finishing and smothening the surface with appropriate sand paper and applying two coats of oil bound distemper (White or tinted) complete all as specified and directed.(Note - work shall be got executed through skilled representative of manufacture company)

Preparing new plastered surfaces of walls and applying two coats of plastic emulsion exterior paint over a coat of primer complete all as specified and directed.

M&L for 10mm thick Vetrified Ceramic tiles (square/rectangular) polished area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement slurry and pointed in white cement or coloured cement to match the shade of tiles, over and including 15 mm thick screed of beding layer in cement plaster (1:6) complete all as specified and directed.

S&F false ceiling with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of size 595 X 595 mm ,prima fine fissured micro look white coloured using Aluminium powder coated “T” section 25 X16X1.5mm thickness grid and 6 mm dia GI suspension wire etc complete all as specified.

S&F anodised aluminium powder coated (minimum thickness 50 microns) frame for doors, windows,partitions with one or more rebates including joining cleats for fixing etc complete all as specifed and directed.

S&F anodised aluminium powder coated (minimum thickness 50 microns) window shutter, fixed type without sash bar, alumn section section weighing 0.55 kg per mrtre including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed.

S&F anodised aluminium powder coated (minimum thickness 50 microns) doors shutters air tight with natural anodized alunimium frame with on or more rebate partly glazed and partly panelled of with hollow profile PVC panelling of thickness 12mm (all aluminium member Top, bootom, vertical & middle of shutter made of size 82.55mmx44.45mmx1.80mm thick including necessary jointing cleats, glazing clips, 5mm thick tinted glass, rubber packing with anodized aluminium beading /glazing clip size 19.00mmx17.30mmx0.70mm, wt 0.097 Kg/RM of both side and fixing aluminium fittings i.e aluminium hinges 100mm three numbers, handles 200mm long two numbers, tower bolts 150mm two numbers and mortic lock with 06 lever fitting shoiuld be ISI marked complete in all respects complete all as specifed and directed. (Note :-Unit rates qouted by the contrcator shall be deemed to be included for making good floor /wall jambs of doors/ windows surface with plaster and match with existing surface finishes,without any extrac cost to the Govt.)

S&F 5.5mm thick tinted glass pane area of each pane exc 0.5 sqm fixed with beads and metal clips/pins complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius with oval acesscomplete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Demolition of brick/stone/block/PCC block work masonry built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for concealed point wiring for one light point /fan point/bell point controlled by one switch one way with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral) in concealed PVC conduit and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.

M&L for concealed point wiring for one fan point/wall fan point controlled by one switch one way with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral) in concealed PVC conduit and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.

M&L for concealed point wiring for one socket out let 5 Amps 5 Pin on same board with other switch controlled by one switch one way with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral) in concealed PVC conduit and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.

M&L for concealed point wiring for one socket out let 5 Amps 5 Pin on the independent board controlled by one switch one way with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral) in concealed PVC conduit and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.(d) Ditto all as per item No.38 above One Switch socket Combined 5 Amps 5 pin on independent board all as specified and directed.

M&L for concealed point wiring for one light point /fan point/bell point controlled by two switch two way with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral) in concealed PVC conduit and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.

M&L for concealed point wiring for one socket out let 15 Amps 5 Pin controlled by one switch one way with 2.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLSH (Phase and Neutral) in concealed PVC conduit and fitting including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 2.5 Sqmm multi stranded copper conductor cable FRLSH (Earth) connected to common earth dolly complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed.

S&F Modular switch 6 Amp, 250 V, AC, one way one module complete all as specified and directed.

S&F One socket out let 5 Amps 5 Pin on same board with other switch complete all as specified and directed.

S&F Modular Switch Socket Combined, 6A - 5 pin combined 2 modules complete all as specified and directed.

S&F switch piano,flush type 240 V single pole 2 way ,ISI Marked complete all as specified and directed.

S&F Modular Switch Socket 16A - 2/3 pin combined 2 module complete all as specified and directed.

M&L in repair sub main wiring with 2 single core, 6 Sqmm, PVC insulated unsheathed,multi stranded copper conductor FRLSH cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSH as continuous earth wire drawn through Casing and Caping and connecting to common earth terminals complete all as specified and directed. (Note :- Two runs of FRLSH PVC copper cable 6 Sqmm size and one run of earth wire FRLSH PVC cable of size 6 Sqmm including one run of PVC casing/caping shall be measured as one unit length for the purpose of measurement and payment )

M&L in repair sub main wiring with 2 single core, 4 Sqmm, PVC insulated unsheathed,multi stranded copper conductor FRLSH cable 1100 Volts grade including 4 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSH as continuous earth wire drawn through Casing and Caping and connecting to common earth terminals complete all as specified and directed. (Note :- Two runs of FRLSH PVC copper cable 4 Sqmm size and one run of earth wire FRLSH PVC cable of size 4 Sqmm including one run of PVC casing/caping shall be measured as one unit length for the purpose of measurement and payment )

S&F sheet metal enclosures double door, Tripple pole and neutral, 08 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed. Note : -Unit rates qouted by the contrcator shall be deemed to be included for flashing in wall concealed complete making good and matching existing surface.

S&F MCB TPN, current rating 63 Amps,.415 V in `C’ series breaking capacity 10 KA complete all as specified and directed.

S&F MCB single pole, current rating 6 - 32 Amps , 240V in `C’ series breaking capacity 10 KA complete all as specified and directed.

S&F MCB SPN, current rating 32 Amps in `C’ series breaking capacity10 KA complete all as specified and directed.

S&F 300 mm sweep exhaust fan AC single phase 230/240 V with louvers complete with necessary 3 core size 23/0.0076 copper flexible cable electric connection from ceiling rose to fan complete all as specified and directed.

S&F 1200 mm sweep ceiling fan complete with resistance type regulator and accessories 230 Volts single phase including hanging and connection from ceiling rose to fan complete all as specified and directed.

S&F Environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness LEDs as light source, suitable for Armstrong/Grid ceiling light fitting 34 watt (size595 x 595mm), including twin core flexible copper cable for connection of the lights and connectors where required complete all as specified and directed. Make: Havells Model No PLUTONE02X2PLR34WLED857S or equivalent of same in makes specified in the Appemdix "B" of Particular Specifications here-in-after, as approved by the GE.

S&F Lamp holder, Angle type, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

Supply, lay, joint, test and commission LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured overall PVC sheathed electric power cable heavy duty with aluminium conductor of size 4 core 10 sqmm crosssectional area, 1100 Volts grade, laid in trenches, fixed on wals,roofs and poles, laid in ducts and floors etc complete all as specified and directed. Note : Earth work, sand cushioning, cable protection cover, pipe and joint shall be measured and paid for separately under respective items of BoQ

S&F LED flood light 170 W, 230 V, AC, 50Hz, outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with driver and lampincluding suitable twin core flexible PVC copper cable for connection of the lights and connectors where required complete all as specified and directed.

S&F sheet metal enclosures disrtribution board, double door, Tripple pole and neutral, 12 ways, DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed. Note : -Unit rates qouted by the contrcator shall be deemed to be included for flashing in wall concealed complete making good and matching existing surface.

S&F MCB TPN, current rating 40 Amps,.415 V in `C’ series breaking capacity 10 KA complete all as specified and directed.

Excavating in post holes (or similarholes) in soft/disintegrated rock each n exc 0.50 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for Cement Concrete (1:2:4) type B-1using 20mm graded stone aggregate as in wall or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundry pillars and posts (including caps and bases) and mass concrete complete all as specified and directed.

S&F rolled mild steel work in tubular tresses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed.

S&F rolled mild steel in Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc using Fe 410W (Grade E-250) quality A complete all as specified and directed.

S&F rolled mild steel in plates (Fe-290, GdeE-165) (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.

S&F joist channel angle, tee sections, MS pipe, MS square tube ,bars , MS plate fixed in purlin rafter cleat, support etc incl welding, riveting etc conf to Fe-410-W Gde E-250 quality-A complete all as specified and directed.

Preparing new steel surfaces of any description, over 10cm in width or girth, not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beading (but not backing), removing serviceable tiles from site and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in levelling course in floor sub base and sub course complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

M&L for and 7 to 8mm thick digital design coloured glazed ceramic tiles (300mm x450mm on verticle surfaces, walls, dados, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over and including 10mm thick rendering cement plater in cement mortar (1:4) complete all as specified and directed

Taking down chowkhats or frame not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F solid PVC double door frame of size 50 x 95mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing.

S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specified and directed.

S&F 300mm long aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section fixed complete all as specified and directed

S&F 150mm size aluminium door handle cast type anodised complete all as specified and directed

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin , anodized and fixed , type C-21 complete all as specified and directed.

Taking down of cement plaster or cement lime plaster of any description on PCC/stone surface/brick surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering cement plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls, surfaces finished even and smooth without using extra cement with water proofing compound complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately as supply and fix only.

M&L for 5mm thick rendering cement plaster in cement mortar (1:3) on ceiling finished even & smooth without using extra cement on concrete surface complete all as specified and directed.

Preparing new plastered and other surfaces of walls and applying 1mm thick readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper; priming plastered and other surfaces with alkali resistant priming paint and distempering walls with two coats of oil bound distemper (White or tinted) complete all as specified and directed.

Preparing new plastered and other surfaces of walls and priming plastered and other surfaces with alkali resistant priming paint and distempering walls wioth two coats of cementbase paint (White or tinted) complete all as specified and directed.

Preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Preparing old trearted and decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Preparing old decorated or plastererd or unplastered old surfaces of walls pillasters, cornices, etc by brooming down, scraping down smoke soot, mould, moss and efflorescent salts and greasy spots including washing, rubbing down and stopping;applying 3mm thick readymixed wallcare putty ; priming plastered and other surfaces with alkali resistant priming paint and distempering walls with two coats oil bound distemper complete all as specified and directed.

S&F in repair 15mm bore angular stop cock, cast copper alloy chromium plated fancy type screwed down high presure with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and directed.

S&F in repair 15mm bore chromium plated brass mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair Chromium plated telephonic jet with all fitting and fixture for EWCs complete all as specified and directed. Make- Jaquar or equvelent.

S&F in repair vitreous china wash down water closet (Pedestal pattern), padestal pan and "P" or "S" trap, including connection to drain (or out going pipe ) and to flushing pipe, anti-sypohonage pipe etc. with plastic water closed seat cover (white )closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device hinge device and cement concrete bedding complete all specified and directed .

Taking up or down 20mm bore steel tubing with fittings and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25mm bore steel tubing with fittings and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings (Elbow, Tee, Coupler, Coupler reducer, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc.) jointed with CPVC solvent cement only and fixed to walls and ceiling concealed pipe work or laid in floors with powder coated metal clamp complete all as specified and directed.

S&F 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings (Elbow, Tee,Coupler, Coupler reducer, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc ) jointed with CPVC solvent cement only and fixed to walls and ceiling concealed pipe work or laid in floors with powder coated metal clamp complete all as specified and directed.

S&F 20mm outer dia Brass Elbow SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 25mm outer dia Brass Elbow SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20mm outer dia Brass Elbow (3/4 X ½) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20 mm outer dia Brass Tee SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 25 mm outer dia Brass Tee SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20 mm outer dia Brass Tee (3/4 X ½) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20mm outer dia Male Brass Threaded Adaptor (MTA/ MBTA) ) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20mm outer dia Male Brass Threaded Adaptor (3/4 X ½) (MTA/ MBTA) ) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20mm outer dia female Brass Threaded Adaptor (3/4 X ½) (MTA/ MBTA) ) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20mm dia female Brass Threaded Adaptor (MTA/ MBTA) ) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 25mm outer dia Tank Adaptor Threaded Adaptor (MTA/ MBTA) ) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20mm outer dia BALL VALVE SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 25mm outer dia BALL VALVE SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F in repairs water closet vitreous china squatting pan Orissa pattern of size 630x450mm white with integral foot rest and 'P' or 'S' trap, front/back inlet (excluding flushing cistern and flush pipe) including provision of cement concrete bedding in PCC (1:5:10) type E-2 and making good to disturbed surface complete all as specified and directed.

S&F in repairs 10 litres capacity low level PVC valveless syphonic action type flushing cistern with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polyethylene of low or high density complete all as specified and directed

S&F in repairs 32 mm dia Flush pipe of polyethylene of low or high density or PVC. for low level cistern complete all as specified and directed.

S&F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fittings, 32 mm bore PVC flush pipe with long screwed shucks and fly nuts and including PVC discharge pipe complete all as specified and directed.

S&F in repair 15 mm size PVC connection with PTMT nuts of length 600 mm long complete all as specified and directed.

S&F in repair, brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed.

S&F in repairs 15mm bore pillar taps cast copper alloy chromium plated fancy type with capston head screwed down high pressure with or without lettered “hot or cold” with long screwed shank and fly nuts for iron pipes complete all as specified and directed.

S&F in repairs, 15mm bore bib taps , cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified and directed.

S&F in repairs 32mm dia bore Waste coupling suitable for discharge pipe of PTMT (half or full threated) for WHB minium weight 45 gms complete all as specified and directed.

S&F in repairs 100mm dia grating doom of PTMT (minimum weight 25gms ) complete all as specified and directed.

S&F in repairs 75mm dia PVC(SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repairs 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 110 mm bore PVC(SWR) pipes including packing under haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

boon construction company