Construction of Gravity Pipe Network for Filling up of Tanks for Drinking Water Purpose in Arasikere Taluk under Yettinahole Gravity Main Canal in the Reach from CH.72.210 KM TO CH.91.840 KM comprising of Supply, Installation, Testing and Commissioning of Gravity MS/HDPE/OPVC Pipes including structures and improvements to 9 No of tanks.

Construction of Gravity Pipe Network for Filling up of Tanks for Drinking Water Purpose in Arasikere Taluk under Yettinahole Gravity Main Canal in the Reach from CH.72.210 KM TO CH.91.840 KM comprising of Supply, Installation, Testing and Commissioning of Gravity MS/HDPE/OPVC Pipes including structures and improvements to 9 No of tanks.

Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment.as directed by Engineer-in-Charge. (SR Item No.2.6 MoRT&H : IRC 201 Page 9 of PWD C&...

Earthwork excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Earthwork excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, brac...

Excavation in hard rock of all toughness including boulders above 0.6 m diameter (0.113 m3) for Canals, cut-off trench of embankments, filter / catch water drains and other appurtenent structures by a...

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...

1300.0 mm Internal diameter, 8.0 mm thick MS(E-250) pipe

1210.0 mm Internal diameter, 15.0 mm thick MS (E-250) pipe

1210.0 mm Internal diameter, 8.0 mm thick MS (E-250) pipe

1160.0 mm Internal diameter, 8.0 mm thick MS(E-250) pipe

1020.0 mm Internal diameter, 6.0 mm thick MS (E-250) pipe

950.0 mm Internal diameter, 6.0 mm thick MS (E-250) pipe

910.0 mm Internal diameter, 5.0 mm thick MS(E-250) pipe

820.0 mm Internal diameter, 5.0 mm thick MS (E-250) pipe

750.0 mm Internal diameter, 5.0 mm thick MS (E-250) pipe

720.0 mm Internal diameter, 5.0 mm thick MS(E-250) pipe

650.0 mm Internal diameter, 5.0 mm thick MS (E-250) pipe

590.0 mm Internal diameter, 5.0 mm thick MS(E-250) pipe

530.0 mm Internal diameter, 5.0 mm thick MS(E-250) pipe

498.0 mm Internal diameter, 5.0 mm thick MS (E-250) pipe

396.6 mm Internal diameter, 5.0 mm thick MS ERW pipe

345.6 mm Internal diameter, 12.0 mm thick MS ERW pipe

345.6 mm Internal diameter, 5.0 mm thick MS ERW pipe

Providing, laying, Providing jointing materials, jointing and testing but excluding excavation and back filling etc. for Oriented Poly vinyl chloride Pipes or O-PVC Pipes of highest Orientation Class ...

Providing and applying pipe coating of fibres, coal tar and solvent based rubber modified bituminous primer of density 0.92 gms/cu cm and viscosity of 1000-2000 cps @ 50gms/sqm followed by seven layer...

Item Description:Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both ...

For HDPE Grade PE-100 PN-6.0,200 mm dia 10.7 mm thick (SR Item No.9.10.9, Page 102 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

For HDPE Grade PE-100 PN-6.0,90 mm dia 10.7 mm thick (SR Item No.9.10.3, Page 102 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

Manufacturing, providing, transporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-73...

Providing and installation of Class SN8 Double Wall orrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and onveying to work site and...

Providing and filling murrum / gravelly soil (CNS soil) for foundation or around pipes including cost of all materials, labour, spreading soil in layers of 100 to 150 mm, breaking clods, watering, com...

Refilling available earth around trenches /pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other ...

Providing and fixing 200 x 200 x 750 mm roughly dressed boundary / demarcation / chainage/ arrow stones including cost of all materials,labour, engraving marks, excavating pit, fixing in position, mur...

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.complete with all lead and lifts.as directed by Engine...

Supply and delivery at site special moulded variety OPVC compatible fittings as per IS 16647-2014 and fabricated as per standards with ISS mark with the latest amendments.Complete with all lead and li...

Providing, fabricating and fixing at site various diameter MS MJ ends with dummy plates (END CAPS) to suit CI / DI spigots end as per the sketch. The cost is inclusive of all materials, i.e, rubber 'O...

For CI/DI Pipe 600 mm dia (SR Item No.2.39.8 , Page 29 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

For CI/DI Pipe 400 mm dia (SR Item No.2.39.6 , Page 29 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical pecifications, including stting out, shoring, strutting, barricading, caution lights, including...

Providing and laying in-situ vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm) grade cement concrete using 40 mm down approved, clean, hard,

graded aggregates for plain con...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Excavation in hard rock of all toughness including boulders above 0.6m diameter (0.113 m3) by approved controlled blasting methods for foundations of canal cross drainage and other appurtenant structu...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and fixing 25 mm dia 3 m long cold twisted defomed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L - bend for embedding...

Providing and laying 100 mm thick in-situ M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for canal lining deploying batching plant, transit mixer and vibratory cy...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tyi...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for

sanitary works and conveying to work sit...

RCC NP3 Pipe of 1200 mm dia - Casing Pipe (SR Item No.16.3.13, Page 188 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

RCC NP3 Pipe of 1100 mm dia - Casing Pipe (SR Item No.16.3.12, Page 188 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

RCC NP3 Pipe of 1000 mm dia - Casing Pipe (SR Item No.16.3.11, Page 188 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

RCC NP3 Pipe of 900 mm dia - Casing Pipe (SR Item No.16.3.10, Page 188 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

RCC NP3 Pipe of 800 mm dia - Casing Pipe (SR Item No.16.3.10, Page 188 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

RCC NP3 Pipe of 700 mm dia - Casing Pipe (SR Item No.16.3.10, Page 188 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction.(SR Item No.1.7, P...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with alllifts and lead, transportation to site, spreading,...

Providing casing embankment using semi-pervious soil available from excavation in layers of 250 to 300 mm ( before compaction )including cost of all materials, machinery, labour, all other operations ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

Water Bound Macadam : Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rollin...

Providing, laying, spreading and compacting graded stone aggregate to wet mix eprocurement macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of ...

Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. (SR Item No.5.32 (MoRT&H Spec...

Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.0 per cent...

Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and filler, t...

Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...

Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, breast wall liner upto 1m height above the roof of vent with a...

Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift service gate consisting of skin plate, vertical and horizontal girders, wheels,

stiffeners, lifting b...

Design, fabrication, supply, erection, testing and commissioning of adequate capacity screw type hoist consisting of supporting structure, platfom, railing, ladder with all accessories for operating c...

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...

KSRRB M800-11.1.Painting lines, dashes, arrows etc.,on Roads in two coats on New Work:-Painting lines, dashes, arrows etc on roads in two coats on new work with ready

mixed road marking paint conformi...

Supply and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel AI...

DI Double flanged eccentric valve for PN-10 700mm dia(SR Item No.2.42.9,Page 30 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

DI Double flanged eccentric valve for PN-10 600mm dia(SR Item No.2.42.8,Page 30 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

DI Double flanged eccentric valve for PN-10 400mm dia(SR Item No.2.42.5, Page 30 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

DI Double flanged eccentric valve for PN-10 1300mm dia

DI Double flanged eccentric valve for PN-10 1400mm dia

Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast

iron of grade GGG 40/50. ...

For TP Air valve of 100 mm dia (SR Item No.2.35.3, Page 28 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

For TP Air valve of 150 mm dia (SR Item No.2.35.4, Page 28 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

For TP Air valve of 200 mm dia (SR Item No.2.35.5, Page 28 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia.with body bonnet of Ductile Iron (DI) conforming to IS-1865 with the latest amendments and of grade GGG 40/50, shaft o...

for Sluice valve PN-10.0 and 200 mm dia (SR Item No.2.23.5, Page 22 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

for Sluice valve PN-10.0 and 150 mm dia (SR Item No.2.23.4, Page 22 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

for Sluice valve PN-10.0 and 100 mm dia (SR Item No.2.23.3, Page 22 of BWSSB, KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

for Sluice valve PN-10.0 and 80 mm dia (SR Item No.2.23.2, Page 22 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24 Common SOR)

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantl...

Providing, laying and jointing HDPE pipes of specified grade and conforming toIS 4984-2016 with latest ammendments and conveying to work site including loading andunloading at both destinations and ro...

Laying of a geotextile filter between pitching and embankment slopes on which painting is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete bloc...

Providing and constructing protective railing consisting of cast in-situ railing posts of size 150 x 150 mm at bottom, 100 x 100 mm at top and 750 mm height, placed approximately at 2 m centre to cent...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Providing and constructing 450 mm thick size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m² set in CM 1 : 5 proportion by volume with pointing joints in CM 1 : 3 proporti...

Excavating of ramming/jacking/driving pit and receiving pit of size 5.00m(length) x 3.00m (breadth), up to 6.00 m depth in all soil strata including shoring and strutting including cutting of Asphalt/...

Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting (SR Item No.8.18,page 67 of Vol-3 202...

Installation of product pipe by manual jacking method - Manufacturing, providing, transporting, rolling, lowering, laying & jointing, testing, commissioning of ERW (Electric Resistance Welded), SAW (S...

For jacking of 900 mm dia of Pipe and 16 mm thick M.S Casing pipe(SR Item No.17.2.8 , page 216 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24)

Conducting ground penetrating RADAR SURVEY in a corridor of 4-6 meter width to detect burried utilities like pipes, cables etc. in such corrider. Marking of the detected utilities on the map of corrid...

Along the road crossings above 60M width for every 1 M and part thereof. (SR Item No.17.5.5 , page 218 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24)

Along the road crossings with dividers and upto 60 M width. (SR Item No.17.5.4 , page 218 of BWSSB,KUWSDB & RWS Vol-5 for 2023-24)

Conducting Seismic Refraction survey to determine stratigraphy along poroposed route i.e, soil, seathered rock, rock interfaces. Detection of faults, fractures, shear zones etc. in the investigated ar...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...

Cutting and stacking bamboos excluding removing stumps and roots with all other ancillary operations complete with all lead & lifts as directed by Engineer - in - Charge.(SR Item No.8.1, Page 101 of W...

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all lead and all lifts

(SR Item No.8.2.1, Pag...

Providing and fixing 25 mm dia 2.75 m long ribbed steel anchor rods with one end split and driven fimly using steel wedge into 1.25 m deep 38 mm dia. hole drilled in bed rock and other end provided wi...

Providing impervious embankment adjacent to masonry / concrete structure and filling trial pits using impervious approved soil from borrow area in layers of 100 to 150 mm ( before compaction ) includi...

Providing and constructing 300 mm thick rubble stone pitching set in CM 1:5 proportion by volume with pin headers at 2 per m2 including cost of all materials from approved source, labour, packing ston...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding

300mm as per drawing and te...

Preparing slope of existing bund ( without pitching ) for abutting fresh embankment to strengthen the existing bund by removing grass and other vegitation including disposing off the material & all ne...

Removing and resetting disturbed dry rubble / size stone pitching 250 to 450 mm thick including packing and wedging with stone chips, finishing surface with all other ancillary operations complete wit...

Providing and constructing dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labou...

Excavating grip trenches of specified size in all kinds of soil in existing bund for abutting fresh embankment to strengthen the existing bund including disposing off the excavated soil in in specifie...

De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/formation of Embankment or as directed

including cost of all machine...

Providing 50 mm deep cement mortar pointing to face stone masonry in CM 1 :2 proportion by volume including cost of all materials, labour, raking-out and cleaning joints, pressing mortar into joints, ...

Providing and laying Hariyala or other approved quality turfing sods for the slopes of earthen embankments over 20 mm thick sand backing including cost of all materials, machinery,labour including pre...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and wat...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification. complete with all lead & lifts as directed by Engineer - in - Charge (...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking to the approp...