Erection of 3.3 KV OH line for marching of LnT make shovel.

Amount

Dismantling of pole/street light standard/strut embedded in cement concrete foundation etc. as required.

Erection of steel pole tubular or rail pole strut concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and re-filling and secured with holding clamps, bolts, nuts, etc. as required.

Dismantling of overhead lines comprising of aluminium overhead conductor, G.I. wire cross arms, insulators etc. as required. 6 x 50 x 3 = 750m x 0.272 + 18*1

Erection of all aluminium conductor of 7/1.96mm to 7/3.10 diameter and above including binding etc. as required. 8 x 50 x 3 = 1200m x 0.272

Supplying and erection of galvanized stay set for 11KV overhead lines complete with 19/20mm dia x 1.8 metres long stay rod, anchor plate of size 45cm x 45cm x 7.5mm thick, thimble, stay clamps, turn buckle (20mm x 600mm), 7/4.00mm dia G.I. stay wire and 11KV strain insulator etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.

Supplying and erection of 11KV disc insulator for 11KV overhead lines with galvanized insulator fittings, ball and socket type and complete with galvanized strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of 11KV pin Insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Supplying of channel iron 75mm x 40mm x 6mm (7.14 kg per metre) V shape cross arm for two 11KV overhead line conductors complete with 50mm x 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc. (as per drawing) and painting with primer and finish paint as required

Erection of pole top/straight two wire/V-shape two wire, angle iron/channel iron, cross arm on steel tubular/rail/PCC pole for 11/22/33 KV as required.

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Transporting of pole from store to site.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and re-filling the trench etc. as required. Upto 120 sq. mm

Total impact of GST for the purpose of CTC

M/S SHIV PARBATI ENTERPRISES

M/S KUMAR ENTERPRISES

M/S UPENDRA ELECTRICAL