NIT No. 04 (24-25) Item No. 3

Supply of deep well Submersible pump set 10 HP,3 Phase, AC supply, working Voltage 415 V, having discharge 600 LPM at head 48 Mtr. Make: -BS Pump/ KSB/ SU Pump/ Mody/Any DJB approved make

Supply of PVC insulated PVC sheathed, copper conductor (flexible) flat cable, size 3 core x 6 Sq mm ,1100 Volts, conforming to IS 694. Make: - Havells/Finolex/Polycab/ Any DJB approved

Supply of 80mm dia. B class GI pipe length 3 Mtr. With duly Welded and threaded flange in both sides, complete with cutting of flange for cable and welded support in both flanges as per site requirement. Make: - Jindal/ Parkash/ Surya/Tata.

Supply of G.I. tail piece medium class of 0.5 mtrs long including one end flanged and another end threaded of 80mm as per site requirement.

Supply of 80mm dia. GI Bend with both side flanges duly welded and threaded as per site requirement.

Supply of M.S. Clamp of MS strip duly hole for holding the pipe of 80mm dia. with nut bolts and washer.

Supply of M.S. Bore cover made out of MS plate suitable for 12"/14" dia. bore complete with suitable hole for passing the 80mm dia. GI Pipe

Supply of Nut Bolts, Washer of good quality as per requirement

Fabrication/ Supply of venturi assembly 80 mm dia. with complete accessories as required at site.

Supply of electrical dozing pump (4lph, 5.5 kg/cm, supply chemical grade tank of 100ltrs with NRV, Foot Valve with NRV, Injector Valve and tube (pipe) etc. Make:- Clormax /Milton Roy

Workmanship Charges for lowering the submersible pump set one no. in new bore well, Fixing/Erection/Installation of E&M equipment, accessories, testing and commissioning on load with satisfactory functioning of Pump. The work includes all sundry required items for completion of work, i.e., eccentric taper, rubber gasket, necessary reinforcement and vibration isolation arrangement, etc. and loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions. The tube well will be commissioned on automation mode and timing to be set as per direction of Engineer-in-Charge. The all-sundry items which are useful & necessary for operation of tube well in automation mode shall be deemed to have been included, whether such items are especially in specification or not.

Super System Engineers

Devraj Enterprises