Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 CrAccepted-AOC | ₹2.9 Cr | L1 | Accepted-AOC PROPER |
| 2 | L1₹2.9 CrRejected-AOC | ₹2.9 Cr | L1 | Rejected-AOC Not Qualified for AOC |
| 3 | L1₹2.9 CrRejected-AOC HOUSE NO 1 NAVA GIRI ROAD 1ST BYE LANE CHANDMARI GUWAHATI 03 | ₹2.9 Cr | L1 | Rejected-AOC Not Qualified for AOC |
| 4 | Not Admitted-Fee/PreQual/Technical GOROIMARI BAZAR TUKRAPARA CHHAYGAON KAMRUP R ASSAM | CHHAYGAON | KAMRUP R | ASSAM | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹3.3 Cr
EMD Value
₹6.5 L
Closing Date
30 Dec 2021, 2:00 pmClosed
Chief Engineer,W.R.Deptt
O/O Chief Engineer Water Resources Department Chandmari
Strengthening of the existing protection works of river Kulshi at Sapartari area (Reconstruction of damaged toe-key and apron).
2021_DoWR_23646_1
PGP/2021-22/SOPD-FDR/II
Open Tender
Civil Works
Works
180 days
MIRZA
Please refer Tender documents.
2 documents required · 2 mandatory
₹7,000
₹6.5 L
Yes
2 Apr 2022
9 Dec 2021
31 Dec 2021
9 Dec 2021
30 Dec 2021
18 Dec 2021
Amount
Medium Jungles: Clearing medium jungles and trees upto 15 cm. girth including cutting, uprooting roots and stumps, removing them from the site of the work, etc. complete as directed. ( When 30% to 60 % of the area is covered by shrubs,trees etc).
Earthwork in bank trimming to the designed section /slope including removing the soils at a safe distance, complete as directed.
Felling trees including uprooting roots and stumps upto 50 cm. below ground, cutting into pieces and removing the same from the site of work as directed. 1.04.1 Trees above 0.50m and up to 1m girth:
Supply of Geo-textile bags of type-A (size 1.03X0.70M), inner dimension made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre having thickness not less than 3.00 mm with minimum properties as (i) Tensile strength (CD) ≥ 24 KN/m (ii) Tensile strength (MD) ≥ 22 KN/m (iii) Mass ≥ 400.00 Gm/m ² (iv) CBR Puncture strength ≥ 4100 N/m2 (v) Elongation @ break (Warp) ≥ 54% (vi) Elongation @ break (Weft)≥ 52% (vii) Abrasion ≥ 70 % (viii) UV Resistance @ 500 hours ≥ 70% (ix) AOS ≤ 75 micron (x) Permittivity ≥ 1.25, (xi) Trapezoidal Tear Strength ≤ 520 N (xii) Permeability = 45Lt/m2/sec (xiii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material). FOR GUWAHATI
Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon) i/c payment of taxes.
Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as (i) Tensile strength ≥ 12 KN/m (ii) Mass ≥ 300.00 Gm/m ² (iii) CBR Puncture strength ≥ 3.5 KN (iv) Elongation at break ≥ 60% (v) Abrasion ≥ 70 % (vi) UV Resistance @ 500 hours ≥ 70% (vii) AOS ≤ 75 micron (ix) Permittivity ≥ 1.25, (x) Trapezoidal Tear Strength ≤ 340 N (xi) Permeability = 2.00 x 10 ̄ ³ m/sec (xii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer & Batch Number clearly on each bundle with “WRD Govt of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material) FOR GUWAHATI
Collection and carriage of specified silt available from river bed (borrow area) beyond 7.00Km and upto 8.00Km from the worksite including loading, unloading and stacking within 90m from the geobag dumping site with Tipper including royalty of silt, cost of P.O.L. etc. complete as directed.
Filling and laying of Geo bags of size 1.03m X 0.70m excluding excavation of specified silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) Without Boat
Supply of Geo-textile bags of Type-B (Size 2.00m x 1.50m), inner dimension made of composite layers of geo-textile as per specifications below : Woven Geo-textile for the outer cover. The woven geo textile is woven with UV resistant slit film tape fibre with MAVR values of the following properties. Geo-textile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. Weight (ISO-9864/ASTMD 5261) ≥250 Gms/Sqm. Tensile strength(MD) ( ASTMD 4595) ≥35 KN/m Tensile strength(CD) ( ASTMD 4595) ≥35 KN/m Tensile Elongation ( ASTMD 4595) ≥5% & ≤30% Grab Elongation ( ASTMD 4632) ≥5% & ≤30% Tensile strength ( ASTMD 4632) = 1.5 KN UV resistance( ASTMD 4355) = 70%/500 hrs Non woven Geo-textile for the inner layer It is needle punched non woven geo-textile made of 100% polypropylene staple fibers which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Weight (ISO-9864/ASTMD 5261) ≥300 Gms/Sqm. Tensile strength(MD) ( ASTMD 4595) ≥12 KN/m Tensile strength(CD) ( ASTMD 4595) ≥12 KN/m Tensile Elongation ( ASTMD 4595) ≥5% & ≤30% Grab Elongation ( ASTMD 4632) ≥5% & ≤30% Tensile strength ( ASTMD 4632) = 1.5 KN UV resistance( ASTMD 4355) = 70%/500 hrs (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).FOR GUWAHATI
Filling and laying of nonwoven Geo-textile bag of dimension 2.00mx1.50m excluding excavation of sand from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum volume 0.612 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100m complete as directed. (Sand, Geo Bag and Polypropylene thread will be supplied by the department free of cost). With Boat
Carriage of Geo Bags of size 2.00 x 1.50 m including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed..(Distance to be calculated with respect to FOR Guwahati)Distance from Division to worksite = 33 km @ Rs.0.11 per bag per KM
Supply of Pre stressed Cement Concrete (PSC) Porcupine members of size 0.10m X 0.10mX 3.00m with M-30 grade of cement concrete conforming to IS 1343:2012using super plasticizer @ 1.2 lit/bag of cement with graded broken course aggregates up to 20mm size down conforming to IS 10262:2009 & IS 456:2000 and reinforced with 4 Nos. of 4 mm dia high tensile steel wire cable at four corners with necessary cover and 4mm high tensile stirrups at 250mm C/C, in conformity with IS-6403:R2002 and stressed to required strength not exceeding 9.18 N/mm, holes of 16 mm dia at 50 cm inside from both ends in the same face and in either face of post another 2 Nos. of holes of size 16 mm dia at 65mm inside from both ends including properly curing for 21 (twentyone ) days and carriage of porcupine members from factory to the stack yard within a distance up to 20 Km including, loading,unloading & stacking complete as directed.(Including forest royalty and all taxes as admissible)
Local Carriage of Porcupine members by Diesel track of 10 MT capacity including loading at stack yard and un loading and stacking at river bank for all lift, complete as directed. Distance from Division to worksite = 33 km @ Rs.1.68 per member per KM
Labour charge for launching of R.C.C./PSC Porcupine including carriage of R.C.C. / PSC porcupine members of size 0.10m × 0.10m × 2.00m from the stack yard to the place of launching ,erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia , 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) a)with boat
Labour charge for launching of R.C.C./PSC Porcupine including carriage of R.C.C. / PSC porcupine members of size 0.10m × 0.10m × 2.00m from the stack yard to the place of launching ,erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia , 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) b)without boat
Supply of galvd. wire netting sheets made of 8G wire of 152mm (6”) square mesh in sheets of overall size 2.57m x 1.66m including 76mm projection of each wire on all sides beyond the net size of 2.42m x 1.50m ) having knots of 12 G wire at every joinst including loading, unloading stacking properly complete as directed by the deptt, (weight of each sheet should not be less than 6.30 kg.) (taxes extra)
Filling and laying in cage with silt filled Geo bags of size 1.03m X 0.70m excluding excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly. in cages made of wire netting sheets of size 2.57x1.66m of 8G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires complete as directed. (Silt, Geo Bag, Wire Netting Sheets and Polypropylene thread will be supplied by the department free of cost). Without Boat
Labour charge for laying Geo fabric sheet as filter bellow pitching including anchoring and complete as directed.
Carriage of wire netting sheets of size 2.57 X 1.66 m made of 8 G wire of 152mm Sq. mesh including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed. Distance from Division to worksite = 33 km
Carriage of Geo Bags of size 1.03 x 0.70 m including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed. Distance from Division to worksite = 33 km @ Rs.0.013 per bag per KM
HEMEN KUMAR DUTTA
APURBA BARUA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .