Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC | L1 | Accepted-AOC Being the lowest | |
| 2 | L2₹18.0 L+₹1.3 L (7.75%)Rejected-Finance | L2 | Rejected-Finance Not Being the Lowest | |
| 3 | L3₹19.1 L+₹2.3 L (13.8%)Rejected-Finance | L3 | Rejected-Finance Not Being the Lowest | |
| 4 | L4₹19.6 L+₹2.9 L (17.1%)Rejected-Finance KTA ROAD LAMBA LINE JUNGLIGHAT PO PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L4 | Rejected-Finance Not Being the Lowest | |
| 5 | L5₹21.1 L+₹4.3 L (25.8%)Rejected-Finance MB NO 180 MG ROAD JUNGLIGHAT PORT BLAIR 744 103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Rejected-Finance Not Being the Lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
10 Mar 2020, 6:00 pmClosed
Shri Rajiv Ranjan, IDSE
GE, Minniebay, Junglighat (PO), Port Blair -744103
REPAIR/MAINT OF INCL DAY TO DAY MAINT OF INTERNAL ELECTRICAL WIRING AT MD ACCN AT MINNIEBAY UNDER AGE E/M NO I IN GE MINNIEBAY, PORT BLAIR(8808/E8)
2019_MES_293266_2
8808 GE MB PB
Open Tender
Civil Works
Item Rate
180 days
GE, Minniebay, Junglighat (PO), Port Blair
As per tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE, Minniebay
₹50,000
Yes
18 Mar 2020
14 Feb 2020
13 Mar 2020
14 Feb 2020
10 Mar 2020
14 Feb 2020
Amount
Taking down carefully the existing aluminium point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings any type etc by unscrewing and taken away from site complete. Note :cost of unserviceable materials will be handed over and charged from the contractor against schedule of credit.
M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade, with non metalic rigid PVC medium duty conduit with accessories such as junction boxes, bends, tees etc. of suitable size including sunk cast iron or pressed steel terminal box for mounting switches, sockets fan regulators etc and 3 mm thick laminated sheet top cover including continuous earth wire PVC insulated 1.00 Sq mm copper stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for the following :- (a) For one light point controlled by one switch
(b) For one buzzer point controlled by one switch
(c) For one fan point controlled by one switch through regulator
(d) For one light point controlled by two 2 -way switches.
(e) For one three pin socket out let 5 amps on independent board complete.
(f) For one three pin socket out let 5 amps on same board complete.
All as per item No 2.05 here in before but with cable 4.0 sqmm (nominal area) multi stranded copper wire unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor, connecting to common earth and earth dolly complete.
Supply and fix switch piano one way 5 A, SP, 230 Volts.
Supply and fixing ceiling rose surface type 3 terminals 65x20mm compelete all as specified
S&F switch socket combination multipurpose 2 in 1, 5 and 15 Amps flush type .
S&F switch socket combination multipurpose 3 pin and 2 pin 5 Amps flush type.
Supply & fix bell push switch piano flush type 5 Amp SP one way.
S&F switch piano two way 5A, SP, 230Volts.
S&F call bell, ding dong type and connection complete.
Supply and fixing Socket Stepped type fan regulator electronic, 5 step type, 230V.
M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, copper cable 4x10 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit of suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, 1 x 10 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :- One run of PVC conduit, five runs of cable shall be measured and paid as one unit.
M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, copper cable 4x 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit of suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, 1x 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :- One run of PVC conduit, 4 runs of cable and one run of earth wire shall be measured and paid as one unit.
M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, copper cable 2 x 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit of suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, cable 1 x 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC conduit 2 two runs of cable and one run of earth wire shall be measured and paid as one unit.
M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, copper cable 2 x 4 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit of suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, cable 1 x 4 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC conduit two runs of cable and one run of earth wire shall be measured and paid as one unit.
M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, copper cable 2x2.5 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit of suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, cable2.5 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC conduit two runs of cable and one run of earth wire shall be measured and paid as one unit.
M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, copper cable 2 x1.5 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit / capping casingof suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, cable 1.5 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring Note :-(i) One run of PVC conduit two runs of cable and one run of earth wire shall be measured and paid as one unit.
Supply and fix in repairs the following items :- Electronic ballast suitable for 18/20W.
Electronic ballast suitable for 36/40 W.
Electronic ballast suitable for 28 W.
Flourescent tube 28W, T-5.
Flourescent tube 18W.
Flourescent tube 36W.
Flourescent tube 14W.
CFL lamp 2 pin 9 W PL type.
CFL lamp 2 pin 11W PL type.
CFL lamp 18W four pin type.
CFL lamp 36W four pin type.
LED 10 W Ball Lamp type.
LED 7 W Ball Lamp type.
Ballast suitable for 9/11W CFL.
Capacitor 2.5mfd 440/500 Volts suitable for ceiling fan of any make.
Capacitor 4.0 mfd 230 Volts, AC suitable for ceiling fan of any make.
Ball bearing (6201/6202/6203) suitable for ceiling fan of 1200/1400mm sweep.
Switch socket combination outlet 5 A, 5 pin box type.
Switch socket combination multipurpouse 2 in 1 , 5/15 A box type.
MCB, TPN, 63A, 415 V ,10KA rupturing capacity.
MCB SPN 6 to 32 Amps,240V, 10KA rupturing capacity.
MCB, SP, 240V, 06 to 32 Amps 10KA rupturing capacity.
Heating element for geyser 1500 watts Screw type /Clamp Type.
Heating element for geyser 2000 watts, Screw type /Clamp Type.
Plug top 15 Amps 3 pin.
Geyser indicator neon type 230 volts.
Thermostat controlled switch for controlling temperature range 30 degree celcius to 70 degree celcius for 25/50 ltrs geyser.
Modular switch piano 6 A, 230 V make legrand cat part 573400 or of equivalent make as mentioned in list of approved make.
Modular switch piano 16 A,230 V make legrand cat part 573410 or of equivalent make as mentioned in list of approved make.
Modular socket piano 16 A,230 V make legrand cat part 573471 or of equivalent make as mentioned in list of approved make.
Modular fan regulator step type 100 w,230 V make legrand cat part 373416 or of equivalent make as mentioned in list of approved make.
Modular socket piano 6 A,230 V make legrand cat part 573470 or of equivalent make as mentioned in list of approved make.
Tube light holder suitable for any tube light.
Starter suitable for any tube light.
Modular white cover plate with frame 1 module
Modular white cover plate with frame 2 module
Modular white cover plate with frame 3 module
Modular white cover plate with frame 4 module
Modular white cover plate with frame 5 module
S&F in Replacement sheet metal enclosure powder coated, DB, TPN, 4 way, 415 V double door type.
S&F in Replacement sheet metal enclosure powder coated, DB, SPN 4 way, 240V, double door type.
S&F in Replacement sheet metal enclosure powder coated, DB, SPN 8 way, 240V, double door type.
S & F Single pole and neutral enclosure with two a pin and earth with single pole MCB 20 Amp.
S&F replace sheet metal enclosure powder coated ,MCCB DB, 'G' frame TPN vertical D/D, 4 way including one number MCCB, three pole, 125A, 25KA for incoming bus bar, neutral links, blanking plates etc, all as specified and directed by Engineer-In-Charge. Make Havell's cat art No DHDLVDRWGNSTB04 or of equivalent make as mentioned in list of approved make.
Taking down ceiling fan/exhaust fan of any make/model and sweep for ovehauling/servicing, cleaning and lubricating movable parts with suitable lubricating oil/grease and painting one coat of synthetic enamel paint of approved quality and colour (spray painted) after preparing the surface throughly and refixing at site at same/different location and connection complete from ceiling rose with new flexible copper cable of suitable size, testing commissioning after completion of the work. Note : The accessories such as bearing and capacitor will be measured and paid separately under relevant items.
M&L for rewinding of ceiling fan/exhaust fan of any make/model/sweep including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaning agent, applying slot insulation and rewinding with super enamelled copper conductor of same gauge/same number of turns as that of existing and connecting the coil suitable to operate on 230 V, single phase, AC supply, permanent capacitor type, tapping the winding and air drying the winding throughly all as specified and directed.
S&F in Replacement Energy efficient (5 Star rated) ceiling fan 1200 mm sweep single phase 230 / 240 volts AC with necessary fitting and connceting with cable from ceiling rose or connector to fan including taking down carefully old ceiling fan with necessary fitting and making good to damaged surface of wall/ceiling to match existing finish all as specified and directed. Make :Cat No ES- 50 5 of Havells or of equivalent make as mentioned in list of approved make. Note : Old unserviceable Fan shall be deposited at E/ M Store yard.
S&F in Replacement Fan clamp, fabricated out of 25x5mm MS flat iron fixed on angle iron/truss/GI Tubing with bolts, nuts, rubber bushes and washer etc complete suitable to fix ceiling fan including painting the exposed steel surface with two coats of first quality synthetic enammeled paint all as specified and directed.
S& F in Replacement down rod for ceiling fan, factory made using MS tubing heavy duty grade duly painted with synthetic enamelled paint over coat of red oxide primer to any length and at height as directed, including necessary cutting/making holes etc complete all as directed.
M&L for Copper cable cord flexible 3 core PVC insulated and overall PVC sheathed of size 2.5 SQ MM fixed in repair for making connection of Gyesers as directed.
S&F 450mm long PVC connection suitable for hot & cold water supply with chromium plated brass screws, nuts at bolts at ends with washers fixed in repairs for making water connection of inlet & outlet from geyser to GI pipe 15mm dia.
Removing unserviceable geyser 25 Ltr capacity from any position after disconnecting the inlet and outlet connection, depositing to MES store and Supply and fix new 25 liters capacity electrical geyser white/half white, copper container inner tank with fiber reinforced body (FRB) puff insulation for both inner tank & for hot outlet copper connection pipe with all in built in safety accessories like thermostat/automatic thermal cut out with ON /OFF /CUT out indicators all pre-wired and additional safety accessories like pressurer release valve/presure reducing valve, non return valve, including new PVC heavy duty pipe with brass ferrule fitting for HOT and COLD water connections fixed in same or new location as ordered as per manufacturers instruction with suitble size nuts & bolts, making necessary connection & testing on completion complete all as directed. Make- cat no puro of Havells or of equivalent make as mentioned in list of approved make. Note- i) The taken down unserviceable geyser alogn with accesories to be removed from site and deposited to AGE E/M storeYard by contractor at own cost & own arrangment. (ii) Quoted rate is also inclusive for new PVC heavy duty pipe for HOT & COLD connections).
S&F in Replacement 15 liters capacity electrical geyser white/half white, copper container inner tank with fiber reinforced body (FRB) puff insulation for both inner tank & for hot outlet copper connection pipe with all in built in safety accessories like thermostat/automatic thermal cut out with ON /OFF /CUT out indicators all pre-wired and additional safety accessories like pressurer release valve/presure reducing valve, non return valve, including new PVC heavy duty pipe with brass ferrule fitting for HOT and COLD water connections fixed in same or new location as ordered as per manufacturers instruction with suitble size nuts & bolts, making necessary connection & testing on completion complete all as directed. Make- cat no Adonia of Havells or of equivalent make as mentioned in list of approved make. Note : (i) The taken down unserviceable geyser alogn with accessories to be removed from site and deposited to AGE E/M storeYard by contractor at own cost & own arrangment. (ii) Quoted rate is also inclusive for new PVC heavy duty pipe for HOT & COLD connections).
Taking out old unserviceable Service wire and supply and fixing Service wire Al Conductor Weather Proof 6 Sqmm 2 core complete.
S&F in Replacement Decorative Ultra Slim linear LED lighting fixture with extruded Polycarbonate environmentel friendly energy effcient cap 20W LED 6000K etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
S&F in Replacement Decorative Ultra Slim linear LED lighting fixture with extruded Polycarbonate environmentel friendly energy effcient cap 10 W LED 6000K etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
S&F in Replacement energy efficient LED security light fittings 25 Watts GreenLine Range with high power LED lamp and unique peanut lens to ensure uniform distribution, AC, 230 Volts, 50 HZ supply single phase including connection with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting all as specified and as directed.
S&F in Replacement GI Bracket for security lights made out of medium grade GI Pipe 50mm dia, 1.5 mtr long bend to shape as directed, fixed on walls with two Nos MS clamp/saddles as required at site including nuts, bolts and washers and all as specified and directed.
S&F in Replacement LED Ceiling Light Driver.
M& L for Grouting of Bolt for Geyser.
M & L for earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion Note : Earth strip/GI wire beyond 7.5 mtr will be measrued and paid separately under relevant item of this schedule.
S&F in Replacement Exhaust fan continuous duty with louvers, double ball bearing, silent operation, rust proof body and blades with fixing arrangements of size 300mm sweep, 1400 rpm, 240V. Note : Old Fan deposited to E/ M Store yard..
S&F in Replacement Heavy duty Exhaust fan continuous duty with louvers, double ball bearing. silent operation, rust proof body and blades with fixing arrangements of size 450 mm sweep, 1400 rpm, 240V. Note : Old Fan deposited to E/ M Store yard..
S&F in Replacement wall mounted fan 400 mm sweep completed fixed to wall with nut bolts etc and 3 core cable connected from celing rose to fan including taking down old unservicable air circulator fan all as specified and directed. Note : Old Fan deposited to E/ M Store yard..
S&F in Replacement Fresh air fan continuous duty with louvers, with fixing arrangements of size 250 mm sweep, 1400 RPM, 240V. Note : Old Fan deposited to E/ M Store yard.
Supply and fixing Service wire Al Conductor Weather Proof 10 Sqmm 2core complete.
S&F in Replacement energy efficient recessed / Ceiling mounted LED luminaire suitable for 2'x2' grid with profile diffuser including lamp, electronic control driver ,36/33 watts, AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as directed. Make CG Cat part LCPL-36-CDL (2X2) or of equivalent make as mentioned in list of approved make.
S&F in Replacement LED Slim Panel Lights 12 W 230 V . Make: havells Model : BAMBOOBL8WLED857SSYMTOPCM (1.0M) or of equivalent make as mentioned in list of approved make.
S&F in Replacement LED Bollard Light fitting 15 W 230 V. Make: Havells cat part no. BAMBOOBL8WLED857SSYMTOPCM (1.0M) or of equivalent make as mentioned in list of approved make.
S&F in Replacement three phase KWH meter 4 wire with LED Display LED meter 10-60 Amp with Box complete. Make L & T cat no WM301BC7D10 or of equivalent make as mentioned in list of approved make.
S&F in Replacement single phase KWh meter with LED Display 1P LED Meter 10-60A of make L & T Cat part WM101BC7DLO or of equivalent make as mentioned in list of approved make.
bansal construction
M/s Karbhagam Sales Agency
kakolil trade agencies
Kathir Marketing Services
PTech Engineers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .