PROVN OF 02 X OVERHEAD SECURITY POST WITH REST ROOM ALONGWITH TOILET AND BATHROOM FACILITY AND ALL CONNECTED SERVICES FOR SECURITY TROOPS ALONG THE PERIMETER OF ENTITY B 61 WEU UNDER GE NORTH DELHI CANTT 10

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n. exc 1.5 m in depth; for foundation n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches exc 1.5 m wide and n. exc 3.0 m in depth; for foundation n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well

ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and directed.

M&L treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (500mm below the ground level) complete all as specified and directed.

M&L for rendering 15mm thick Plaster on fair face of brick surface in cement mortar 1:4 on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick Plaster on fair face of brick surface in cement mortar 1:6 on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L preparation of newly plastered surface on walls and applying two coat of Oil Bound Distemper over a coat of primer and 3mm thick Putty complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on any faces of concrete surfaces finished fair and even without using extra cement in ceiling/ chajja on brick/stone walls complete all as specified and directed.

M&L three coats of white wash on newly plastered surfaces as in ceiling including preparation, complete all as specified and directed.

M&L for 100mm thick cement concrete type D-2 1:4:8 (40mm graded agg) as in sub floor; complete all as specified and directed.

M&L for sand filling thick under floors or in foundations including watering as required complete all as specified and directed.

M&L non skid ceramic tiles colored tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing complete all as specified and directed.

Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed.

S&F 35mm thick 2nd class hardwood plain framed panelled shutters (any number of panels) with panels of timber flat on both sides(feathered edge), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhats complete all as specified and directed.

S&F Aluminium fixed ventilator with following specifications: (i) outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut aluminium welded, welded shutter (01 nos) of size size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 1 Nos per shutter (ii) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE (iii) Window shall have provision for installation of Exhaust fan and provn of window glass shutter and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per direction of Engr-in-charge. (iv) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.

S&F PVC water tanks 1000 ltr cap rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

M&L RCC foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete uing type M-25 (Design mix) (using 20mm graded) stone aggregatecomplete all as specified and directed.

M&L RCC in Columns, pillars, piers, posts and struts uing type M-25 (Design mix) (using 20mm graded) stone aggregate complete all as specified and directed.

Form work to soffits of suspended slab such as roof slabs, floor slabs and similar work; n. exc 200mm thick (horizontal or sloping) complete all as specified and directed.

Mild steel bars(TMT) 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooking for columns hooking ends and binding with and for and including MS wire (annealed) not less than 0.9mm dia.

Form work to edges of concrete flats, floor and roofs n. exc 20 cm wide horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L RCC slab supported on walls , beams & colmns etc as in roof & the like using M-25 (Design mix) using 20mm stone aggregate complete all as specified and directed.

M&L RCC in stairways including steps but excluding landing using type M-25 (Design mix) (using 20mm graded) stone aggregate complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and directed.

M&L cement concrete type B0 (1:2:4) using 12.5mm graded aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L 20mm Gun metal globe of gate valve with iron wheel head, screwed both ends of size complete all as specified and directed.

S&F 15mm dia Central hole basin Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and completely surrounding pipe with concrete of 150mm bore DWC pipe after they are laid and tested complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan built in circular well steining (any radius) constructed from the base or curb laid dry complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius builtin CM 1:4 complete all as specified and directed.

M&L RCC slab supported on walls , beams & colmns etc as in roof & the like using M-30(Design mix) using 20mm stone aggregate complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-0 (using 12.50mm garded crushed stone aggregate) as in benching, surface channel of drain complete all as specified and directed.

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates (modular/ conventional type as required), blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-

S&F precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mm x 1000mm x 80mm complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and directed.

One light point controlled by one switch complete all as specified and directed.

One ceiling/exhaust fan point controlled by one switch complete all as specified and directed.

One socket outlet 5 amps controlled by one switch on independent board complete all as specified and directed.

All as per the description of srl item No 1 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 2.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire complete all as specified and directed.

S&F lamp holder, 230 volt AC, PVC / Polycarbonate type with back plate suitable for batten fitting including 9 watt LED bulb, 6500 K complete complete all as specified and directed.

S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50mm x 25mm size complete all as specified and directed.

S&F modular switch 6/10 Amps, one way, one module 240 volts complete all as specified and directed.

S&F modular socket, 3 pin 6 Amps,240 volts, 2 module complete all as specified and directed.

S&F modular switch 16 A, 1 module,240 volts complete all as specified and directed.

S&F modular socket 6/16 A, 5 pin, 2 module, 240 volts complete all as specified and directed.

S&F MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following no of way :-

S&F MCB DP/SPN, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete of following rating :-

S&F electronic fan step regulator flush switch type 100/120 watt, 230 Volt complete all as specified and directed.

M&L in for two single core (submain) PVC insulated cable with 6 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia or higher size, concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete all as specified and directed.

S&F MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete all as specified and directed.

S&L in replacement or fixing or passing through pipe, 1100 volts grade PVC insulated aluminium stranded conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circuler for the following size of cables :-

S&F in wall mounted LED batten with aluminium housing and integrated electronic drive 18/20 watt fixture 4 feet provided for efficient heat dissipation with polycorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for earthing with Galvanised Steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using GI wire of size 4mm dia as earthing lead (upto the body of the equipment) by means of GI bolts, nuts, check nuts and washers and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete

S&F in surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in exhaust fan 200mm sweep, 230V, AC, plastic body with louver shutter etc complete and connection from ceiling rose to fan terminal incl cutting of hole at wall for required size and making good disturbed surface and depositing old fan to store yard complete all as directed (make:Havells,Crompton,Usha)

S&F electric water heater, storage type 25 ltrs capacity, BEE star rated, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adapter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode having adustable knobe for temperature control and inner tank material of superior gla

S&L sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

25mm dia

20mm dia

S&F in repair heavy duty Brass forged Ball valve, screwed down high pressure 25 Kg/Cm2 with iron handle, screwed both ends complete for the following sizes of pipes :-

20mm dia

ss lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having heating element 2 KW and minium two year warranty on product, minimum three years on heating element complete all as specified and as directed .

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as directed

M&L for sand cushioning for protection of cable with screen wash river sand complete all as specified and directed.

16 Sqmm 4 core

35 Sqmm 3.5 core

300 watt motorised revolving LED search light with Speed Control Up-Down Control & On-Off control of light through remote,Wattage: 150W TO 400W, Input Voltage : 230 VAC, Power Factor : HPF 0.987,Operating Current of LED Bread : 1500 mA Cont. current Driver,IS16106,Beam Angle : 5-9 degree Mounting : 360 degree Rotational

M&L for LED Flood Light luminaire, energy saving & enviornmental friendly, long life diecast aluminium, IP65, with high power LED as light source incl necessary fixing arrangement with clamps of suitable size and connection using 1.5 Sqmm PVC insulated copper cable complete all as directed for following wattage.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to galvanised earth lead wire 4mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 15mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm MS bars at 150mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete