Balance work for construction of Sarai Bhawan at Giabong in District Kinnaur HP (SH- Building portion, WS and SI and site development

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation renches or drains , including dressing of sides and ramming of bottoms, upto all lead, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all lead All kinds of soil. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Excavation work by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, upto all lead, including getting out the excavated soil and disposal of surplus excavated soils as directed, upto all lead. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, upto all depth , including getting out the excavated soil, and then returning the soil as required, in layers including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within all lead :All kinds of soil. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for : including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Edges of slabs and breaks in floors and walls

Cornices and mouldings

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (one Cement : four coarse sand) : eight graded stone aggregate 40mm (forty millimeter) nominal size) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (one cement : five coarse sand): Ten graded stone aggregate 40mm(forty millimeter) nominal size (forty millimeter ), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20 mm nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : 1.5 coarse sand) : three graded stone aggregate 20 mm(twenty millimeter)nominal size.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Steel reinforcement (TATA /SAIL / JINDAL PANTHER/RINL) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(One cement : Six coarse sand : Twelve graded stone aggregate 20mm (Twenty millimeter) nominal size upto plinth level with :Cement mortar 1:6(one cement : six coarse sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(One cement : Six coarse sand : Twelve graded stone aggregate 20mm (Twenty millimeter) nominal size at window sills, ceiling level and the like :Cement mortar 1:6(one cement : six coarse sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (one cement : six course sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying dry rubble stone masonry (Coursed/un-coursed) in sub structure of Retaining walls & Breast walls complete as per drawing and techinical specification clause 704.6 and 1302.5, including carriage of material through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing backfilling behind R/wall and B/wall with granular material in all heights complete as per drawing & Technical specfication clause 1204.3,8 including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying Boulder filling dry hand packed under floor, cluding carriage of material through all modes of transportation with in all leads and lifts, as per direction of the Engineer-in-Charge.

Marble work gang saw cut (polished and machine cut) of thickness 18 mm(Eighteen millimeter) for wall lining (veneer work), backing filled with a grout of average 12 mm(twelve millimeter) thick in cement mortar 1:3 (one cement : three coarse sand), including pointing with white cement mortar 1:2 (one white cement : two marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately)Area of slab upto 0.50 sqm, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Brick work with common brunt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth. including carriage of material through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Brick work with common burnt clay machine moulded perforated brick of class designation 12.5 conforming to IS:2222 in superstructure above plinth level upto floor five level in Cement Mortar 1:6 (One Cement: Six Sand): including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position. 2nd class Deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood, :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood, :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 12mm (Twelve millimeter) thick pre-laminated board both side bwp phenol bonded exterior /interior grade shutter with frame of 1st class deodar wood for cup board including nickel plated bright finished piano hinges-25mm (Twenty five millimetter) thick Frame for all floors, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing wire gauge shutter using stainless steel grade 304 wire gauge with wire of dia 0.5mm and average width of aperture 1.4mm in both direction for doors, window and clerestory window with necessary screws 35mm thick shutter, second class deodar wood.

Providing and fixing 19mm(Ninteen millimeter) thick water proof commerical board in shelves/ Box for cup board with butt joints & fixing with nails & screws etc. complete in all floors, ,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing water proof kit play of standard quality Indian standard (ISI) mark and approved shape and colour in panelling & wall lining i/c mitring at junction . Butt jointing and nail complete (Frame work for base to be measured & paid separetely) 12mm thick including carriage of material through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing plain asbestos sheet lining with butt jointing and wood screws (frame work and cover) fillets to be measured and paid for separately) 5mm (five millimeter) thick including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge

Providing and fixing wooden plank ceiling with planks over lapping each other and jointing with wood screws (Frame work to be paid for separately) 1st Class deodar wood 12mm thick . including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :50x12mm(fifty into twelve millimeter)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing M.S. round or square bras with M.S. flats at required spacing in wooden frames of window and clerestory window.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing 40x5mm (Forty into five millimeter) flat iron hold fast 40 cm (forty centimeter) long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concreteblock 30x10x15cm 1:3:6 mix (One cement : three coarse sand) : six graded stone aggregate 20mm nominal size). including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than gradeAC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete300x16 mm :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing aluminium tower bolts ISI marked ,anodised (anodic coating not less then grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

200x10mm (Two hundred into Ten millimeter)

150x10mm ( One hundred fifty into Ten millimeter)

100x10mm ( One hundred into Ten millimeter)

Providing and fixing aluminium handles,ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

125mm ( One hundred twenty five millimeter)

100mm (Hundred millimeter)

75mm (Seventy five millimeter)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing ISi marked oxidised M.S. Single acting spring hinges with necessary screws etc. complete.150mm (One hudred fifty millimeter)including carriage of materials through all modes of transportation with in all leads

Providing and fixing oxidised m.S. double acting spring hinges with necessary screws etc. complete 150mm 9one hundred fifty millimeter)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing bright finished brass hard drawn hooks and eyes 150mm (One hundred fifity millimeter) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying Duro stone vetrified tiles in different sizes (thickness to be specfied by the manufacture), with water absorption less than 0.08% and conforming to iS; 15622,of approved brand & manufacturer, in all colours and shade ,in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm (six millimeter) thickness,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Cement concrete flooring 1:2:4. ( one cement : two coarse sand : four graded stone aggregate)finished with a floating coat of neat cement, including cement slury, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing 2 mm (Two millimeter) thick pvc/rubber tiles flooring plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately) for payment, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (One cement : four coarse sand) :25 mm(twenty five millimeter) thick, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps,over 12mm (Twelve millimeter) thick bed of cement mortar 1:3 (One Cement :three coarse sand), jointing with gray cement slurry @ 3.3 kg /sqm including grounting the joint with white cement & matching pigments etc. complete Size of tile 600x600mm (Six hundred into Six hundred millimeter) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying Ceramic glazed floor tiles of size 300x300mm(Three hundred into three hundred millimeter) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (One Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. including grouting the joint with white cement & matching pigments etc. complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 0.60 mm thick prepainted steel sheet (TATA/SAIL/JSW Make) in roofing with hot dipped meallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) diameter with prepainted limpet and rubber washer complete with all accesoriees as required as per the direction of Engineer-in-Charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing ridges or hips 60 cm (sixty centimeter) (TATA/SAIL/JSW Make) overall with 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster 5 microns over 5 microns primer coating i/c fixing with prepainted iron Jor L hooks , bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washer complete with all accessories as required as per the directin of Engineer-in-Charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing valley 60cm(sixtycentimeter) overall with 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks bolts & nuts 6mm (six millimeter) diameter & prepainted G.I. limpet and bitumen washer complete with all accessories as required as per the direction of Engineer-in-Charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Steel work (TATA/SAIL/Apollo/JSW Make ) welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying to level for slope & jointing reinforcement light duty non pressure pipe 1st class NP2 of internal dia and jointing with collar including testing of joints complete. 250 mm. including carriage of material through all modes of transportation within all leads and lifts , as per PWD specifications and as per direction of Engineer -in- Charge.

Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

French spirit polishing :Two or more coats on new works including a coat of wood filler, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm ( Three point eight four kilogram per ten square meter) ), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

6 mm (Six millimetetr) cement plaster of mix :1:3 (one cement : three fine sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

15 mm (Fifteen millimeter) cement plaster on the rough side of single or half brick wall of mix :1:6 (one cement: six fine sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

20 mm cement plaster in 1:4 (1 cement : 4 coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) Flush/ Ruled pointing, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

White washing with lime to give an even shade New work (three or more coats), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Making plinth protection 50mm (Fifty millimeter) thick of cement concrete 1:3:6(one cement three coarse sand(zone-III) : six graded stone aggregrate 20mm(twenty millimeter nominal size) over 75mm (seventy five millimeter) thick bed of dry brick ballast 40 mm (forty millimeter nominal size, well rammed and consolidated and with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Constructing Course rubble hammer dredded 'U'Shape open surface drain with side wall. 15x22 cm ( Fifteen into twenty two centimeter) in cement mortar 1:3 (One cement : Six sand) including earth work and laying 10 cm (Ten centimeter) cement concrete in 1:5:10 (one cement :five sand: ten graded /crushed stone aggregate) of 40 mm(forty millimeter) nominal size) and finished with a floating coat oof neat cement complete as per standard design, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work ;including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

PN - 16 Pipe, 20mm OD (SDR-7.4)

PN - 16 Pipe, 25 mm OD (SDR-7.4)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 100 (hundred) millimeter soil, waste and vent pipes: snad cast iron pipe as pe IS: 1729, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

100 mm( One Hundred millimeter) diameter.

75mm (Seventy five millimeter) diameter.

Coller 100 mm( One Hundred millimeter) nominal size.

75mm (Seventy five millimeter) nominal size.

Bends of required degree (any radius) II Plain 100 mm( One Hundred millimeter) nominal size.

75mm (Seventy five millimeter) nominal size.

Providing and fixing PVC cowl ISI marked including fixing with approved adhesive etc., including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

75mm (Seventy five millimeter) nominal size diameter.

100 mm( One Hundred millimeter) nominal size diameter.

Providing and fixing Cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged greating without vent arm complete, 75mm (Seventy five millimeter) nominal diameter, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, Ten litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approvedmunicipal design complete, including painting of fittings and brack ets, cutting and making good the walls and floors wherever required: including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 630x450mm(six hundred thirty into four hundred fifty millimeter). , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm(forty millimeter), including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 610x460 mm bowl depth 200. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. Brass waste for wash basin or sink 32mm dia including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing M.I. Union for wash basin or sink 32mm dia, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. Brass 32mm (Thirty two millimeter) size bottel trap of approved quality and make and as per the direction of Engineer-in-Charge, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 600x450 mm(six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm(Six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PTMT towel rail completed with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. brass toilet paper holder: including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. Brass bib tap with Capstan head 15mm (Fifteen millimeter) diameter, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. Brass piller tap with Capstan head 15mm (Fifteen millimeter) diameter, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing brass stop cock of approved quality 15 mm (Fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing one hole basin mixing faucet, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing wall mixing faucet for shower and bath with over head pipe and bath shower, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing bath shower, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing bath shower with angluar abd rest holder, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing uplasticised PVC connection pipe with brass unions, 45 cm (Fourty five millimeter) length, 15 mm (Fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

15 mm(Fifteen millimeter) nominal bore

20 mm(Twenty millimeter) nominal bore

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Inside size 90x80 cm (Ninty into eighty centimeter) and 45 cm (Forty five centimeter) deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Inside size 120x90 cm (One hundred twenty into ninty centimeter) and 90 cm (Ninty centimeter) deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supplying and fixing C.I. Cover without frame for manholes 455x610mm (Four hundred fifty into six hundred ten millimeter) rectangular C.I. cover ( Light duty) with waight of the cover to be no less than 23Kg, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.