Development of Fountain at Dilaram Bagh, Sunset Point/Couple/Wedding Photo site and Baby Feeding Room, Single Water supply and Electric work to promote tourism under Panch Gaurav Scheme at Amber Palace, Jaipur (Civil Work)

Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.

Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and laying wooden flooring with a direct laminated surface treated with luminum oxide on top of a high-densityfiber board with a density of 850 Kg./per Mtr. having a clicksystem tongue and groove joint to ecure a long lasting joint.The planks are or termite resistant and water protected with both side lamination Wooden flooring Planks of size 1208 x194 x 8 mm / 1215x294x8 mm (8mm thick laminated floorclass of use 23/31 having a wear resistance level of AC-3 ,impact sistance > 9mm, moisture resistance 3-10% as per(EN-424, EN – 438 EN – 425 EN – 417 – 2)or PREN 3329complete in all respectas per direction of EI

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.

Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish :20mm thick

P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 1200mm

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 600 mm X 1200mm

P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 (-do-)

Hoisting Charges for each floor :For items 2.26.5 to 2.26.8

Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge

Swan neck pillar cock 15 mm nominal size

Bib Cock with long thread 15 mm nominal size

Angular stop cock with long thread 15 mm nominal size

Soap dish

Paper holder

Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)

20mm nominal size

25 mm nominal size

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).

50 mm nominal size

P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 610 mm x 510 mm

P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm.

P & F W.V.C. Urinal Partition Plate of approved standard make of size 630x315mm including making good the wall.

P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor.

P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm.

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.

75 mm dia

110 mm dia

160 mm dia

Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.

1.00 mm thick with zinc coating not less than 275 gm/m2

P & F Gun-metal Non-return Valve or Check Valve (IS : 778 Make) of approved make, superior quality:

15mm nominal bore.

20mm nominal bore.

P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :

Gun-metal 15mm nominal bore.

Gun-metal 25mm nominal bore.

Providing and fixing double scaffolding system on the exterior side, upto five story made with 4" wooden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. The scaffolding system shall be stiffened with bracing, runner, connection of building if ecessary with all essential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be, measured for payment. The payment will be made once irrespective of duration of scaffolding.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part- B Based on RUIDP SOR 2023 (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Providing and fixing fine dressed sand stone /approved stone traditional work as per existing matching geometrical design including moulding work with fine finishing, fixing with thambli by proper adhesive and white cement with pigment including making grooveete complete all respect.

Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade.25mm thick

Providing and laying lime Dhar on roofing as per Rajasthan, Jaipur traditional practice with lime, Surkhi, old lime powder, brick aggregate 12 to 20mm (1:2:2:2) and using Methi, Gur, Hemp, Belgiri etc. including beating and temping 100 to 150 mm thick as per specifications. Including dismantling of old deteriorated roofing

Lime Surkhi Plaster 1:2 (1 Lime : 2 Surkhi) including preparation of mortar by traditional practice (by grinding) in coarse for base coarse and subsequent coarse & Loi, tamping, beating, curring till the shrinkage cracks are disappear. The work is to be done with all lead as the work of restoration nature as per Jaipur practice including adding, gur, methi & gugal, on old walls including removal of all old loose and decayed plaster, each coat to be done after 3 days of previous coat. (a) 33 mm thick in four coats

Deduct for plaster work if lime kara applying on plaster as finishing coat. 40.11

Providing & applying Lime Kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manualy on lime base, on flat surface in two coats. First coat applying 3mm to 4mm. thick and curring properly at least 7 days, second finishing coat done after 7 days of previous coat as per traditional practice. (thickness not more then 6 mm.)

Khameera Colour Washing as per traditional practice to prepare the Khameera the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding curd Gugal, for non-synthetic colour adding gum (babool gum) as per specification. Then applying prepared solution on walls three to four thin coats as desired finishing.

Deduct for khameera work if kangoora / design / lining work not done

Providing and fixing double leaf Door wooden shutters made of 1st grade M.P. teackwood as per traditional design (Deshi pattern) planks thickness 40mm and width of Binies, Andheri 50mm and thickness 35mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle etc.) as per existing matching / as per approved design with moulding / carving complete in all respect. M.P teak wood grade Ist40.35.1

Providing and fixing double leaf Window wooden shutters made of 1st grade wood as per traditional design (Deshi pattern) planks thickness 25mm and width of Binies, Andheri 35mm and thickness 25mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching / as per approved design with moulding / carving complete in all respect. M.P teak wood grade Ist(40.36.1)

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE PART " C"BASED ON NON BSR (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Providing and fixing "Corrugated" surface sand stone/approved stone flooring for ramp-way with fine dressed corrugation work as per approved design and size over a base of of grinded Lime surkhi mortar 1:2 and jointed with masaldar lime putty and stone powder 1:1 with an adixure of pigment, complete in all respect, as per direction of Engineer Incharge. (a) 75 mm. thick stone slab

Refixing and repair of heritage wooden chool doors and windows with required fitting such as nails, sankal, kunda, cheri, handle,hinges etc.and providing and fixing new stone frames/old frames if required complete as per direction of Engineer in charge

Applicable Codes and Standards Work shall be carried out as per latest edition of Indian Standards and Code of Practices. List given here shall not be considered as conclusive and is for reference and guidance only. Any discrepancies/ conflict noticed shall be brought to the notice of Architect/Engineer in charge fordirection / approval. However, as a general rule more stringent specification shall take precedence. IS 277 Galvanized steel sheets (plain and corrugated) IS 1200 Methods of measurement of building and civil Engineering works Materials * All clamps, fittings, accessories should be made out of first grade quality galvanized steel conforming to IS 316. All products should be made out of 0.6mm (24g) galvanized sheet.• All galvanized steel fittings and accessories should be cleaned, phosphatized and finished with one coat of epoxy etching primer of 30 microns of polyurethane paint. All panels / doors should be oven baked for durability and finish. * Pilaster shoes wherever applicable should be of stainless steel of grade 316 • The panels and doors should be constructed out of 12mm thick merino laminate or any other optional material as specified by the architect. • All panels should have a built in feature to be totally sight proof on all four corners for better privacy. Standard gap of 150mm on sides and on moving element has to be provided unless otherwise specified or scheduled in the drawing or layout. • Cubicles should have a provision for mounting of the toilet hardware like handrails, hinges, locks with indicator, coat hooks, tissue holders and taps as per scheduled and specified. All panels should be fully protected with the self adhesive film and to be removed at the handing over of the cubicles Compartment Depth and Width: As per the drawings Modal type - Stylam cuboid NUVO Modal Size of Cubicles Door Size- 600X1790mm, Divider 1800mm height, Thickness of compat leminate 12mm, overall height of cubicle - 2000mm including bottom gap 150mm All accessories as per standared - Nylon black hardware and alluminium black profile. All items approved by Engineering Incharge.

Supply and fixing of signages (T2,1200X115X1500mm) including the base structure with red sand stone cladding and writing the matter on Signage ink, etc. complete as per direction of engineer in charge .(Rate analysis on BSR)

Providing & Fixing of Stone Dustbin as per traditional design made out of red/pink sand stone overall size 600(L)x600(D)x750(H)mm . 40 mm thick sand stone as per approved design fixed on 4 pillar size 100x100 thick 750mm height, inside 1 stainless steel container (4mm thick) of size 360 mm bottom, 470 mm top and 530 mm height fixed with pivot system supported with stone pillar fixed in ground 200 mm embedded in ground with neccesary earthwork and concreting etc.complete as per details and drawings and as directed by engineer incharge.

Providing and fixing Cast Iron Garden benches 1500 mm long 3 seated with Cast Iron two sides of 410 mm high up to seat level and overall height of 865 mm the minimum weight of both side cast iron pair should b 62 Kg. The seating should be made out of 11 Nos. of Mid steel pipe RHS planks having size 65 mm x 25 mm x 1480 mm long 1.5 mm thick. The cast iron bench shouldhave5/8" inch diameter tie rod, bracing strip. The entire assembly of cast iron bench should be of paint with two coats primer and three coats of reputed make oil paint complete. Total weight of complete benches should be minimum 98 Kg.

Providing and fixing of Makrana white second quality Marble stone flooring table rubbed, 14-20 mm thick over 20mm (Av.) thick base of Cement Motor 1:4 including coting of white cement under stone. Jointing with white cement with pigment to match the shade of the marble: grinding, rubbing and mirror polishing complete. Makrana white second quality plain of size 23" x 23" white cement underlay of stone Complete as per direction of engineering incharge (marble sample to be approved by engineering incharge before executing the work).