Supply, installation, testing and commissioning of 500 LPH RO plant along with AMC for the period of two years from the time of installation of the plant at SDH Pampore.

Amount

Supply, installation, testing and commissioning of 500 LPH RO plant along with AMC for the period of two years from the time of installation of the plant at SDH Pampore.

Supply, installation, testing and commissioning of 500 LPH RO plant.as per technical spacifications in Annexure C of NIT.

Raw water storage tank HDPE (Five Layer and Anti Microbial)(2000 liter) with necessary holes for inlet, outlet, tank nipples.

Providing and fitting of PEX pipe with all pipe fittings (SS push pull connector SS316 grade various dialysis machines (08 Points).

Providing and fixing 3 layer PP-R pipe ,25mm (OD)confirming to IS 15801, UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings.

Raw Water mono block pump complete with electric motor of 1 HP rating along with common base frame duly grouted in cement concrete foundation. (H 10 m)

Providing and fitting of 75mm PVC (type B) pipe including elbows, tees , collars etc to collect waste water from different dialysis machines and Ro plant to the nearest waste water collection point including cutting and making good the walls.

Brick work with common burnt clay (Non-Modular) Bricks of class designation 7.5 inch foundation including curing in : Cement Mortar 1:4 (1 cement: 4 coarse sand)

Providing and fixing aluminium work for doors , windows, ventilators and partions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions with required EPDM rubber/ neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight and joined mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P brass /stainless steel screws all complete as per site requirement. (Powder coated Aluminium with minimum thickness of powder coating 50 microns)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board confirming to IS:12823 Grade-I type-II in panelling fixed in aluminium doors , windows, shutters and partion frames with C.P brass/ stainless steel screws etc complete as per site requirement.(Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing of aluminium handle 100mm with stainless steel screws complete as per site requirement.

Providing and fixing brass 100mm mortice latch and lock with 6levers for aluminium doors including necessary cutting and making good etc complete

Providing and fixing of anodised aluminium butt hings 100x63x4mm

Providing and fixing of anodised aluminium tower bolt 100x10mm

Applying 12mm cement plaster of mix 1:4 ( 1 cement: 4coarse sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

AMC for two years post commissioning.

ZAID GULZAR (BID ID -2242112)

SABS ENTERPRISES (BID ID -2244778)

MOHAMMAD RAFIQ BHAT (BID ID -2245003)