REPAIR/REPLACEMENT AND MAINT OF INTERNAL ELECTRIFICATION AND SUB MAIN WIRING ALONGWITH FITTINS, FIXTURES IN OTM ACCN OUTSIDE FORT WILLIAM AND REPAIR/MAINT OF IRON REMOVAL PLANTS, WATER FILTERATION PLANTS AND SWIMMING POOL AT FORT WILLIAM UNDER GE (FW

Amount

SCHEDULA 'A' PART-I (INT ELECTRIFICATION WORKS) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants, regulators, sockets, light fitting etc for reuse or removing from site and making good disturbed surface of walls, floors etc.complete all as specified and directed.

Taking down of Old MCB DB any type any size including MCCB/RCCB/MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site or removal from site complete all as specified and directed.

Taking down of old Submain wiring any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M&L for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping medium duty complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed.

All as per item No. 04 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 04 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 04 above but using 2.5 sqmm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (surface type point wiring with terminal box).

M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

All as per item No. 08 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No. 08 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No. 08 above but using 2.5 sqmm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS-H PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box).

Materials and Labour for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping complete with all fittings and accessories, (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed. (NOTE :- Quoted rate shall be exclusive of the cost of terminal box & laminate cover which shall be measured seperately.

All as per item No. 12 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (surface type point wiring without terminal box).

All as per item No. 12 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (surface type point wiring without terminal box).

All as per item No 12 above but using 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuty wire for one 15/16 amp multi socket out let independent (surface type point wiring without terminal box).

M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and incl PVC conduit complete with all fittings and accessories (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed. (NOTE :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be exclusive of the cost of terminal box & laminate cover which shall be measured seperately. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

All as per item No 16 here-in-before but for one 5 pin 5/6 amps multisocket outlet point in independent board (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

All as per item No 16 here-in-before but for one 5 pin 5/6 amp socket out let point in the same switch board of light points (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

All as per item No 16 above but using 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuty wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in existing PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTE: Wiring shall be done in existing conduit. Quoted rate shall be excusive of the cost of conduit)

All as per item No. 20 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box in existing conduit).

All as per item No. 20 above but using 2.5 sqmm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS-H PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box in existing conduit).

PIANO SWITCH, 5/6 AMPS, SINGLE POLE, 240 VOLTS

S & F new Switch piano, flush type, one way

Re-fixing of switch piano, any type (retrieved from taking down of point wiring)

S&F in repairs new piano switch, flush type (incl taking down existing switch)

BELL PUSH, 5/6 AMPS, 240 VOLTS

S&F new Bell push, flush type

Re-fixing of bell push, any type (retrieved from taking down of point wiring)

S&F in repairs, Bell push, flush type (incl taking down existing fitting)

SOCKET OUTLET, 5/6 AMPS, 240 VOLTS

S & F new socket outlet, 2 in 1, 3 pin, flush type (non-shuttered)

Re-fixing of socket outlet, 5/6 Amps any type (retrieved from taking down of point wiring)

S&F in repairs new socket outlet, flush type, non-shuttered (incl taking down existing outlet)

SWITCH SOCKET COMBINATION OUTLET, 5/6 AMPS, 240 VOLTS

S&F new switch socket combination outlet, 2-in-1, 3 pin, flush type (non-shuttered)

Re-fixing of switch socket combination outlet, any type (retrieved from taking down of point wiring)

S&F in repairs new switch socket combination outlet, flush type (incl taking down existing outlet)

PIANO SWITCH, 15/16 AMPS, SINGLE POLE, 240 VOLTS

S & F new Switch piano, flush type, one way

Re-fixing of switch piano, any type (retrieved from taking down of point wiring)

S&F in repairs new piano switch, flush type (incl taking down existing switch)

SOCKET OUTLET, 6 IN 1, 3 PIN, 6/16 AMPS,

S & F new socket outlet, flush type (non-shuttered)

Re-fixing of socket outlet, 6/16 Amps any type (retrieved from taking down of point wiring)

S&F in repairs new socket outlet, flush type with indicator lamp (incl taking down existing outlet)

SWITCH SOCKET COMBINATION OUTLET, 6 IN 1, 3 PIN, 6/16 AMPS,

S & F new switch socket combination outlet, flush type (non-shuttered)

Re-fixing of switch socket combination outlet, 6/16 Amps any type (retrieved from taking down of point wiring)

S&F in repairs new switch socket combination outlet, non-shuttered, flush (incl taking down existing outlet)

CALL BELL/BUZZER, AC 230/240 VOLTS, SINGLE POLE

S&F new Call bell, musical type

S&F new Call bell, ding dong type

Re-fixing of Call bell, any type (retrieved from taking down of point wiring)

Re-fixing of electric call bell, ding donmg type (retrieved from taking down of point wiring)

S&F in repairs Call bell, musical type (incl taking down existing fitting)

S&F in repairs call bell, ding dong type (incl taking down existing fitting)

CEILING ROSE, THREE TERMINALS, 240 VOLTS

S&F new Ceiling rose, surface type

Re-fixing of ceiling rose, any type (retrieved from taking down of point wiring)

FAN REGULATOR, STEPPED TYPE, 5 SPEED CONTROL, 230/240 VOLTS

S&F stepped type electronic fan regulator, flush type

Re-fixing of fan regulator, any type (retrieved from taking down of point wiring)

S&F in repairs stepped type electronic fan regulator, flush type, (incl taking down existing fitting)

LAMP HOLDER, PVC/POLYCARBONATE BODY

S&F lamp holder with back plate suitable for batten/pendant fittings or to be mounted on walls

Re-fixing of lamp holder, any type (retrieved from taking down of point wiring)

S&F in repairs lamp holder with back plate suitable for batten fittings (incl taking down existing fitting)

MODULAR SWITCH, 5/6 AMPS, 1 MODULE, ONE WAY

S & F Modular Switch 1 way 6 A, 1 module

Re-fixing of modular switch, 5/6 Amps, 1 module (retrieved from taking down of point wiring)

MODULAR SWITCH, 16 AMPS, 1 MODULE, ONE WAY

S & F Modular Switch 1 way 16 A, 1 module

Re-fixing of modular switch, 16 Amps, 1 module (retrieved from taking down of point wiring)

MODULAR SOCKET, 6 AMPS, 2 MODULE

S & F Modular Socket 6 A, 2/3 pin combined 2 module

Re-fixing of modular socket, 6 Amps, 2 module (retrieved from taking down of point wiring)

MODULAR SOCKET, 16 AMPS, 2 MODULE

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module

Re-fixing of modular socket, 6 A/ 16 A, 2/3 pin combined 2 module (retrieved from taking down of point wiring)

MODULAR FAN REGULATOR

S & F Modular Fan step regulator, 120 watt, 2 module

Re-fixing of modular Fan step regulator, 120 watt, 2 module (retrieved from taking down of point wiring)

MODULAR BELL PUSH

S & F Modular Bell push 6A, 1 module

Re-fixing of modular Bell push 6A, 1 module (retrieved from taking down of point wiring)

MODULAR BLANKING PLATE

S & F Modular Blank plate, 1 module

Re-fixing of modular Blank plate, 1 module (retrieved from taking down of point wiring)

MOTOR STARTER SWITCH

S & F 25 Amps motor starter switch, modular type

MODULAR TYPE COVER PLATE WITH FRAME

S&F Modular White cover plate with frame 1 module

S&F Modular White cover plate with frame 2 module

S&F Modular White cover plate with frame 3 module

S&F Modular White cover plate with frame 4 module

S&F Modular White cover plate with frame 6 module

S&F Modular White cover plate with frame 8 module

S&F Modular White cover plate with frame 12 module

MODULAR TYPE METAL FLUSH BOX

S & F Modular type Metal Flush box 1/2 module

S & F Modular type Metal Flush box 3 module

S & F Modular type Metal Flush box 4 module

S & F Modular type Metal Flush box 6 module

S & F Modular type Metal Flush box 8 module

S & F Modular type Metal Flush box 12 module

S & F in repair Modular fittings/accessories in existing location complete all as specified & directed for the following types :-.

Modular Switch 1 way 6 A, 1 module, 240 Volts AC

Modular Switch 1 way 16 A, 1 module 240 Volts AC

Modular Socket 6 A, 2/3 pin combined 2 module, shuttered, 240 Volts AC

Modular Socket 6 / 16 A, 2/3 pin combined 2 module, shuttered, 240 Volts AC

Modular Fan step regulator, 120 watt, 2 module, 100W, 4 step, 240 Volts AC

S & F in repair Modular metal flush box in existing location complete all as specified and directed for the following types :-.

3 module

4 module

6 module

8 module

12 module

S & F in repair Modular front plate with cover in existing location complete all as specified and directed for the following types :-.

3 module

4 module

6 module

8 module

12 module

M&L for sub main wiring with 2 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC casing-caping of suitable size, surface type complete all as specified and directed. (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC casing capping shall be measured as one unit)

All as per Srl. Item No. 48 above but with two runs of 4.0 Sqmm cable and one run of 4.0 Sqmm as earth continuity conductor in PVC casing capping (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC casing capping shall be measured as one unit)

Material and labour for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, operating voltage 180-270 V, with acrylic/polycarbonate difuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed. complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation

-ditto- as per Item no. 51 but including taking down existing unserviceable tube light fitting

-ditto- as per Item No. 51 but of 1 X 9/10 Watt capacity in polycarbonate housing with lumen output not less than 105 lumen per watt

-ditto- as per Item no. 53 but including taking down existing unserviceable tube light fitting

S&F in repair LED tube rod 20 watt, 4 feet long, suited for installation in existing T8 fittings complete all as specified and directed.

S&F in repair LED tube rod, 18 watt, 4 feet long, suited for installation in existing T8 fittings complete all as specified and directed.

Supply and Fix in repairs recess mounted slim-fit downlighter, round or square, having glare free frosted diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 15 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed and complying with the following specifications:- (a) minimum efficacy 105 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation (f) Weather protection: IP20

-ditto- as per Item No. 57 but surface mounted LED downlighter of capacity 15 Watt

Supply and Fix in repairs recess mounted LED luminaire, of size 600 mm x 600 mm, in powder coated CRCA housing , having glare free diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 35/36 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed and complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation (f) Weather protection: IP20

NOTE FOR ITEM NO. 51 to 59 :- (1) List of approved makes has been provided in particular specifications. Contractor shall ensure that luminaire provided comply with the aforesaid specifications. No claim shall be entertained during currency of work. (2) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete incl lamps from the date of completion of work. The product will be replaced free of cost in following cases :- (a) Manufacturing Defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 metre) below 90% of claimed value of lumen (or lux at 1 metre) of the LED/luminaire. (d) Decision of GE in this regard shall be final and binding. (3) All LED/luminaire shall meet the provision laid down in IS-16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part-II/Section 13. (4) The contractor shall submit the LM-80 and LM-79 test report (except decorative fitttings) as specified in Particular Specifications.

S&F DB, VTPN, 4 way, vertical type, IP 43 protection, double door (premium range), 415 volts with provision for MCCB as incomer and MCB as outgoing and electrically connecting up complete all as specified and directed. (MAKE : L&T, Cat No. DBVTH004DD /LEGRAND, Cat No: 5077 45 / ABB, Cat No: E-SVTDB M 4XT3 /HAGER, Cat No: VYV04DM2-P /SCHNEIDER, Cat No: A9HVD04L)

S&F DB, VTPN, 4 way, vertical type, IP 43 protection, double door (normal range), 415 volts with provision for MCCB as incomer and MCB as outgoing and electrically connecting up complete all as specified and directed. (MAKE : C&S, Cat No: CSDBMCCB125PDD04S / INDO ASIAN, Cat No. 811893 / HAVELLS, Cat No: DHDLVDRWAOFO04 / BCH, Cat No: BCHVTPNDD04W-B / HPL, Cat No: MDBVDD04160TAB)

S&F TPN DB, IP 43 protection, double door (premium range), 415 volts, 4 way (8+12), with 100 Amps copper bus bar for each phase complete all as specified and directed. (MAKE : L&T, Cat No. DBTPN004DD / LEGRAND, Cat No: 507670 / SCHNEIDER, Cat No. A9HTND04 / ABB, Cat No: E-SHDB M4 / PANASONIC, Cat No: BQS 304H / HAGER, Cat No: VYT04DH)

All as per Item No. 62 above 4 Way (8+12) TPN DB (normal range) complete all as specified and directed. (MAKE : C&S, Cat No: CSDBTPNHPDD04 /BCH, Cat No: BCHHTPNDD04W / INDO ASIAN, Cat No: 811841 / HAVELLS, Cat No: DHDPTHODRW04 / HPL, Cat No: MDBTDD04)

S&F SPN DB, IP 43 protection, double door (premium range), 240 volts, 4 way, with 100 Amps copper Bus Bar complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN004DD / LEGRAND, Cat No: 507610 / ABB, Cat No. E-SHC M4 / SCHNEIDER, Cat No. NBKRENSNDD04 / HAGER, Cat No: VYS04D)

All as per Item No. 64 above 4 Way SPN DB (normal range) complete all as specified and directed. (MAKE : C&S, Cat No; CSDBSPNPDD04 / BCH, Cat No: BCHSPNDD04W / HPL, Cat No: MDBDD04 / HAVELLS, Cat No: DHDPSHODRW04 / INDO ASIAN, Cat No: 811824)

S&F Double Door, Sheet Metal Enclosure for DBs (premium range), for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN008DD / LEGRAND, Cat No: 507611 /ABB, Cat No. E-SHC M 8 / SCHNEIDER, Cat No. A9HSND08 / HAGER, Cat No: VYS08D)

All as per Item No. 66 above 8 Way SPN DB (normal range) complete all as specified and directed. (MAKE : C&S, Cat No: CSDBSPNPDD08 / BCH, Cat No: BCHSPNDD08W / HPL, Cat No: MDBDD08 / HAVELLS, Cat No: DHDPSHODRW08 / INDO ASIAN, Cat No: 811807)

NOTE FOR ITEM NO. 60 to 67 :- (1) Incoming MCCB/RCCB/MCB and outgoing MCBs shall be measured and paid seperately as "Supply Only". (2) Quoted rate is deemed to be inclusive of blanking plate for slots remaining blank after fixing of MCBs. (3) DB, MCCB, RCCB & MCB shall be of the same manufacturer.

S&F MCCB (premium range), 4 pole, 100 Amps, 16 kA, 415 Volts, AC, 50 Hz with and including adjustable thermal and magnetic setting, fixed in DB complete all as specified and directed. (MAKE : L&T, Cat No: CM90518OOKO / LEGRAND, Cat No: 420015 / HAGER, Cat No: HDA101U or equivalent model in SCHNEIDER, Cat No: LV426167 /ABB, Cat No: 1SDA066818R1)

S&F MCCB (normal range), 4 pole, 100 Amps, 16 kA, 415 Volts, AC, 50 Hz with and including adjustable thermal and magnetic setting, fixed in DB complete all as specified and directed. (MAKE : C&S, Cat No: CSESL125FMU4P-100A / INDO ASIAN, Cat No: 830242 / HPL, Cat No: TAB160DX100AC4P or equivalent model in BCH / HAVELLS)

S&F MCCB (premium range), 4 pole, 160 Amps, 25 kA, 415 Volts, AC, 50 Hz with and including adjustable thermal and magnetic setting, fixed in DB complete all as specified and directed. (MAKE : L&T, Cat No: CM90642OOMO / LEGRAND, Cat No: 420057/ HAGER, Cat No: HHS161DR / SCHNEIDER, Cat No: LV426268 /ABB, Cat No: 1SDA067410R1)

S&F MCCB (normal range), 4 pole, 160 Amps, 25 kA, 415 Volts, AC, 50 Hz with and including adjustable thermal and magnetic setting, fixed in DB complete all as specified and directed. (MAKE : C&S, Cat No: CSE2M250ATM4P-160 / INDO ASIAN, Cat No: 830295 / HPL, Cat No: TAB160CY160AC4P or equivalent model in BCH / HAVELLS)

S&F isolator (premium range), 4 pole, 100 Amps complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)

S&F isolator (normal range), 4 pole, 100 Amps complete all as specified and directed. (MAKE : C&S / BCH / HPL / HAVELLS / INDO ASIAN)

S&F MCB (premium range), 'C' series, TPN, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)

S&F MCB (ordinary quality), 'C' series, TPN, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : C&S / BCH / HPL / HAVELLS / INDO ASIAN)

S&F MCB (premium range), 'C' series, SPN, 40 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)

S&F MCB (normal range), 'C' series, SPN, 40 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : C&S / BCH / HPL / HAVELLS / INDO ASIAN)

S&F MCB (premium range), 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)

S&F MCB (normal range), 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : C&S / BCH / HPL / HAVELLS / INDO ASIAN)

S&F in repair MODULAR MCB protected power unit with one 25 Amps socket with 3 pin plug top and including 01 No MCB, DP, and starter 25 Amps ratings with six module plate and flush metal GI box and electrically connected complete all as specified and directed. (MAKE : HAVELLS, Cat No. DHDUCDP0253025 / NORTH WEST, Cat No: ACPU6M-BT or equivalent model in ABB / CRABTREE / HAGER / SCHNEIDER / LEGRAND) (NOTE : Enclosure & MCB shall be same manufacturer. Cost of MCB is deemed to be included in the quoted rate)

S&F in repairs single pole enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps, 'C' Curve, 10 KA including all accesories complete all as specified and directed. (MAKE OF ENCLOSURE: LEGRAND, Cat No. 5078 10 / L&T, Cat No. DBMPS120SD / SCHNEIDER, Cat No: A9HMS220 / ABB, Cat No. NSYN8690SGKSP20 / C&S, Cat No: CSDBPSSPN020 / BCH, Cat No: BCHPSDBSPN20 / HPL, Cat No: MDBSP20 / HAGER, Cat No: VYA220Cor equivalent model in Havells / Indo Asian ) (NOTE : Enclosure & MCB shall be same manufacturer. Cost of MCB is deemed to be included in the quoted rate)

S&F in repair Metal clad plug, 2 pin, 20 Amps complete all as specified and directed. (Make : L&T, Cat No: MPS220P / INDO ASIAN, Cat No: 810386 or equivalent model in Havells / Schneider / ABB / C&S / Legrand / HAGER)

S&F in repair Metal clad socket, 20 Amps, 2 pin in different locations/bldgs complete all as specified and directed. (Make : L&T, Cat No - MPS220S / INDO ASIAN, Cat No: 810390 or equivalent model in Havells / Schneider / ABB / C&S / Legrand / HAGER)

S&F in repair PVC terminal rectangular boxes of suitable size with 3 mm thick PVC/plastic laminated sheet, top cover with suitable size brass screwws and washers etc for mounting switches, sockets, regulators etc of size 100 mm X 100 mm X 50 mm deep complete all as specified and direcetd.

-ditto- but of size 200 mm X 100 mm X 50 mm

-ditto- but of size 250 mm X 100 mm X 50 mm

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth wire 4 mm dia (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing and dismantling of existing unsv earthing complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.

SCHEDULE 'A' PART-II (WATER SUPPLY WORKS) Dismantling the old unserviceable items from the existing iron removal plant of 10000 GPH capacity incl opening the man hole cover taking out all filter media i.e. sand, gravels, pebbles, stainer, MNO2, Resin, valves, pipe fittings with complete connection of pipes & valves and repairing the same including filling of filter media/chemicals as required and testing complete all as specified and as directed. Each iron removal plant consists of following:- (a) One Pressure filter capacity 10000 GPH. (b) One Softner capacity 10000 GPH (c) One soda ash dozer / Oxidation chamber (d) Accessories for above items.

Notes :- (a) Quoted rate is deemed to be inclusive of :- (i) keeping leak proof of whole plants, all Sluice/ diapharam / flanged valves, replacement of rubber hose, clamps, etc. (ii) Filling of all filter media to plants like gravels, pebbles, sand, catalyst MNO2, resin, stainer etc. (iii) Disconnection or interconnection pipes of any sizes, valves, guages, and all accessories etc., incl reassembling the whole plant by welding., jointing etc. (iv) Testing of water for Iron, PH value, Hardness, Residual chlorine etc. (b) New items like pressure guage, pipes/flanges of any type & any size, valves of any type, diaphram, painting, water testing, fliter media, nut, bolt , washers shall be measured and paid seperately under relevent items of this schedule. (c) Contractor is advised to visit the site prior to submission of bid. No claim shall be admissible at a later stage.

Supply only Coarse sand suitable for filter media/rapid gravity filter

Supply only 2 to 5 MM gravels

Supply only 5 to 12 MM gravels-

Supply only 12 to 20 MM gravels

Supply only 20 to 40 MM gravels

Supply only Catalyst (MNO2) having 65% content

Supply only common salt

M&L for the cascade consisting of three tiers and cleaning by applying Hydrochloric acid / Muratic acid, cleaning thoroughly the floor of three tier cascade with the help of water and finally painting the wall surface (weather proof) and testing cascade for smooth functioning etc complete all as specified and directed by Engineer-in-Charge.

M&L Cleaning and servicing of balancing tank by using wire brush, manually removing the deposited silt, debris at the bottom (8.30 m depth), suitable for cleaned water, inside the tank (area of tank approx 16 Sqm) and painting of DI Pipe of Dia 200 MM with one coat of synthetic enamel paint etc complete all as specified and directed.

S&F Roller with bearing suitable for suction sweeper pumps as in repair complete all as specified and directed by engr-in-charge

S&F Wood core nylon brush 48" long for sweeper (pool cleaner), Iron Frame/structure head with dimension as suitable for fixing of brush complete with 04 Nos wheel, nylon brush, NRV at outer end for fixing of pipe with clamps and suitable Nut & Bolts etc. as in repair complete all as specified and directed by Engineer-in-Charge.

S&F Wood core nylon brush 24" long for sweeper (pool cleaner) with iron Frame/structure head with dimension as suitable for fixing of brush complete with 04 Nos wheel, nylon brush, NRV at outer end for fixing of pipe with clamps and suitable Nut & Bolts etc. as in repair complete all as specified and directed by Engineer-in-Charge.

S&F Nylon (polymide multifilament) rope 26 mm dia 3 strand, conforming to IS 4572, for suction sweeper as in repair complete all as specified and directed by Engineer-in-Charge.

M&L one coat of black bituminious paint after necessary preparation of internal surfaces of plants consisting of one pressure filter, one water softner & one oxidation chamber of capacity 10000 LPH including necessary connected pipe lines and valves complete all as specified and directed by Engineer-in-Charge.

M&L one coat of synthetic enamel paint (smoke grey/blue shade) after preparation of external surfaces of plant consisting of one pressure filter, one water softner & one oxidation chamber of capacity 10000 LPH including necessary connected pipe lines and valves complete all as specified and directed by Engineer-in-Charge.

S&F Cast iron bend upto 200 mm bore (any type, radius and angle) taper any type (straight, bend, increasing, decreasing or double socket etc) tee pieces, 'Y' junction, double branch, cross (all sockets or socket and spigot/flanged type) collars, caps and plugs as in repair complete all as directed by Engineer-in-Charge.

S&F Fibre reinforced PVC suction pipe of size 40 MM dia fixed as in repair complete all as specified and as directed. (Make : Honda or equivalent make as approved by GE)

S&F steel hose clip with nut & bolt suitable for suction pipe 100 MM pipe fixed as in repair complete all as specified and as directed by engr-in-charge

S&F MS bush reducer 50mmx40mm with check nut both side threaded type fixed as in repair all as specified and as directed by Engr-in-Charge

S&F Aluminium telescopic extension rod minimum length 15 ft. with Net/Brush (size 18 inch) for removing floating leaf & scrubbing algae from swimming pool & filteration Plant as in repair all as specified and as directed by engr-in-charge

S&F CI Diaphram valve 100 mm bore flanged type including taking down old unserviceable diapharm valve as in repair complete all as specified and directed by Engineer-in-Charge.

S&F CI Diaphram valve 50 mm bore flanged type including taking down old unserviceable diapharm valve as in repair complete all as specified and directed by Engineer-in-Charge.

S&F CI Diaphram valve 40 mm bore flanged type including taking down old unserviceable diapharm valve as in repair complete all as specified and directed by Engineer-in-Charge.

S&F CI Diaphram valve 25 mm bore flanged type including taking down old unserviceable diapharm valve as in repair complete all as specified and directed by Engineer-in-Charge.

M&L 225 NA cation resin complete all as specified and as directed by Engineer-in-Charge. (Make : Ion Exchange India Ltd or any other reputed make as approved by GE) Note : Material shall be procured directly from the Manufacturer or from authorised dealer in sealed pack/container. Purchase Voucher shall be submitted.

Supply only poly alumnium chloride (PAC) suitable for drinking water, high basicity in granular/powder form inorganic soluble polymer confirming to IS 15573 complete all as specified and as directed by Engineer-in-Charge. (Make : Vikram PAC or any other reputed make as approved by GE) Note : Material shall be procured directly from the Manufacturer or from authorised dealer in sealed pack/container. Purchase Voucher shall be submitted.

Supply only high stregth calcium based granular chlorination chemical (calcium hypochlorite) having chloring percentage of 65% to 75% by volume complete all as specified and as directed by Engineer-in-Charge. (Make : Purichlor / Aquafit / Declibac or any other reputed make as approved by GE) Note : Material shall be procured directly from the Manufacturer or from authorised dealer in sealed pack/container. Purchase Voucher shall be submitted.

Supply only bleaching powder, as per IS 1065 complete all as specified and as directed by Engineer-in-Charge. Note : Material shall be procured directly from the Manufacturer or from authorised dealer in sealed pack/container. Purchase Voucher shall be submitted.

Supply only high strength calcium based granular chlorination chemical (TCAA 90%) complete all as specified and as directed by Engineer-in-Charge. (Make : Chemtex/ABI or any other reputed make as approved by GE) Note : Material shall be procured directly from the Manufacturer or from authorised dealer in sealed pack/container. Purchase Voucher shall be submitted.

M&L Mild steel studs nuts and bolts with Mild Steel washer of any size for jointing of Mild Steel Column pipes, etc as in repair complete all as specified and directed by Engineer-in-Charge.

S&F MS Flange suitable for 100 mm bore MS pipe, internally threaded and having 4 hole type including necessary welding work, as in repair complete all as specified and directed by Engineer-in-Charge.

S&F MS Flange suitable for 40 mm bore MS pipe, internally threaded and having 4 hole type including necessary welding work, as in repair complete all as specified and directed by Engineer-in-Charge..

S&F MS pipe heavy duty of size 100 mm dia incl necessary fittings like bend, tee, elbow incl fabrication, cutting & welding works (arc/gas type) for iron removal plant as in repair complete all as specified and directed by Engineer-in-Charge.

S&F MS pipe heavy duty of size 200 mm dia incl necessary fittings like bend, tee, elbow incl fabrication, cutting & welding works (arc/gas type) for iron removal plant as in repair complete all as specified and directed by Engineer-in-Charge.

S&F MS specials like dummy plate, base plate, frame, MS foundation bolt, etc incl necessary welding works by arc/gas type as in repair complete all as specified and directed by Engineer-in-Charge.

S & F Pressure gauge dial type with range 0 to 10 kg/sqcm including necessary MS pipe & stop cock suitable size as in repair complete all as specified and directed by the Engineer-in-charge.

S&F HDPE push fit umberella type strainer of size 1/4" dia as in repair complete all as specified and directed by Engineer-in-Charge..

S&F HDPE push fit screw type stainer complete of size 1/4" dia as in repair complete all as specified and directed by Engineer-in-Charge.

Cleaning of Swimming Pool water of capacity 21.5 lakh litres by adding alum, Soda, oxalic acid, Thioline, Chlorination and tested as per entire satisfaction of the Engineer-in-Charge. Note: (i) The quoted rate shall deemed to be inclusive of all tools and plants, all chemicals & labours for initial cleaning etc. as required at site (ii) The chemical reqmt of TCCA 90% is 250Kgs, Alum crystal is 400 kgs. (iii) Purchase voucher for TCCA and Alum crystals are to be submitted.

M&L one coat of synthetic enamel paint (smoke grey/blue shade) after preparation of external surfaces of plant consisting of three pressure filters, vertical type of capacity 88 Cum/hour including necessary connected pipe lines and valves complete all as specified and directed by Engineer-in-Charge. (Location : Swimming Pool Treatment Plant)

MAZUMDER ENTERPRISE

JAGATMATA ENTERPRISE

H D CONSTRUCTION

MS HORIZEN

GHOSH ENTERPRISE

ARJUN DAS VALECHA

BASU AND CO