Construction of New DVOR Building, allied facilities & associated works inside Operational Area at Shivamogga Airport

Construction of New DVOR Building, allied facilities & associated works inside Operational Area at Shivamogga Airport, Sogane Village, Shivamogga District

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, in...

Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, in...

Earth work excavation for pipelines or cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

Extra for every additional lift of 1.5 m or part thereof in excavation or banking excavated or stacked materials. All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lea...

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level a)1 4 8 (1 Cement 4 coarse sand (zone III) derived from...

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level a)1 2 4 (1 cement 2 coarse sand (zone III) derived from...

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (a) Thermo Mechanically Treated bars of grade Fe 500D or ...

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) Thermo Mechanically Treated bars of grade Fe 500D or ...

Providing and laying in position Cement Concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...

Percentage Additionalities for Formwork, Centering and Scaffolding for Foundation Works.

Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite or...

Percentage Additionalities for Formwork, Centering and Scaffolding for Slab

Providing 12 mm cement plaster with cement mortar 1 6 (1 cement, 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 6 mm cement plaster with cement mortar 1 3 (1 cement 3 fine sand) on concrete surface or ceilings including rounding off corners wherever required smooth rendering, providing and removing sc...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 6 (1 cement 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removin...

Finishing walls with textured exterior paint of required shade New work (Two coats applied at 3.28 L per 10 Sqm) over and including priming coat of exterior primer applied at 2.20kg per 10 Sqm to give...

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g per l, of approved manufacturer, of required shade and colour complete, as per manufacturers specificati...

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized a...

Providing and fixing mild steel round holding down bolts with nuts, washer and plates complete.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour and shade, with necessa...

Providing and laying damp-proof course 40mm thick with cement concrete 1 2 4 (1 cement 2 coarse sand (zone-III) derived from natural sources, 4 graded stone aggregate 12.5mm nominal size derived from ...

Providing and applying a coat of residual petroleum bitumen of grade of VG 10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally...

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 percent and conforming to IS 15622, of approved br...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 percent and conforming to I.S. 15622, of approved make, in all...

Providing and laying Non skid Ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conformingto IS 15622 of approved make in colours such as Whit...

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required s...

Extra for providing opening of required size and shape for wash basin or kitchen sink in kitchen platform, vanity counter and similar location in marbleor Graniteor stone work, including necessary hol...

Providing and fixing frame work for partitionsor wall lining etc. made of50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing 60 cm centre to centre b...

Providing and fixing in wall lining medium density fibre board IS 14587 1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement...

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, Portland...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS , 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of ...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 15mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS,8931 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Providing and fixing PTMT bib cock of approved quality and colour.a)15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing pressed steel door frames conforming to IS, 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle...

Providing and fixing ISI marked flush door shutters conforming to IS , 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sectionsor appropriate Z sections and other sections of approved make conform...

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi chambered frame with in-built roller track and sash extruded profil...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sectionsor appropriate Z sections and other sections of approved make conform...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS, 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber or neoprene gasket etc. complete as per the architectural drawings and the directions o...

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width...

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868), transparent or dyed to required colour or shade, with nuts and screws ...

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade, with necessary screws etc. comp...

Providing and fixing bright finished brass 100 mm mortice latch and lockwith 6 levers and a pair of lever handles of approved quality with necessaryscrews etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade, with necessary screws etc. c...

Providing and fixing M.S. clamp of required dia to the top of casingor housing pipe of tubewell as per IS, 2800 (part I), including necessary bolts and nuts of required size complete. 150 mm clamp

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore

Providing and laying six courses water proofing treatment withbitumen felt over roofs consisting of first, third and fifth courses ofblown or or and residual bitumen applied hot at 1.45, 1.20 and 1.70...

Grading roof for water proofing treatment with a) Cement mortar 1 3 (1 cement 3 coarse sand)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expansi...

Providing and fixing on wall face unplasticised PVC moulded fittingsor accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conform...

Providing and fixing on wall face unplasticised PVC moulded fittingsor accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring confor...

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller...

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness and sizeor shape, made...

Providing and fixing uplasticised PVC connection pipe with brass unions a)45 cm length i)15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.a)Flexible pipe i) 32 mm dia

Providing and fixing PTMT grating of approved quality and colour.a)Circular type i) 125 mm nominal dia with 25 mm waste hole.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh...

Providing and fixing Stainless Steel A ISI 304 (18or8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making g...

Providing and fixing 16 mm M.S. Fan clamps of standard shape andsize in existing R.C.C. slab, including cutting chase, anchoring clampto reinforcement bar, including cleaning, refilling, making good t...

Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete.a)Fixed to steel ...

Steel work welded in built up sectionsor framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.A)In gr...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (a) Two or more coats on new work.

Providing and fixing soil, waste and vent pipes a)75 mm diameter i) Centrifugally cast (spun) iron socketed pipeas per IS 3989

Providing and laying cement concrete 1 5 10 (1 cement 5 coarsesand 10 graded stone aggregate 40 mm nominal size) all round S.W. pipes including bed concrete as per standard design a)100 mm diameter S....

Providing and fixing square-mouth S.W. gully trap class SP1complete with C.I. grating brick masonry chamber with water tightC.I. cover with frame of 300 x300 mm size (inside) the weight ofcover to be ...

Constructing brick masonry manhole in cement mortar 1 4 ( 1cement 4 coarse sand ) with R.C.C. top slab with 1 1.5 3 mix (1cement 1.5 coarse sand (zone-III) 3 graded stone aggregate 20mm nominal size)...

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm drybrick honey comb shaft with bricks and S.W. drain pipe 100 mmdiameter, 1.8 m long complete as per standard design.a)With common burnt c...

Providing and fixing M.S. stays and clamps for sand cast ironorcentrifugally cast (spun) iron pipes of diameter a) 75 mm

Providing and fixing trap of self cleansing design with screwed downor hinged grating with or without vent arm complete, including cost ofcutting and making good the walls and floors a)100 mm inlet an...

Providing and fixing 8 mm dia C.P. orS.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to Eureopean type W.C. ofquality and make as approved by Engineer in charge.

Providing and fixing toilet paper holder a)C.P. Brass

Providing and fixing terminal guard a)75 mm i)Sand cast iron Sand S as per IS 3989

Providing and fixing terminal guard a)75 mm i)Sand cast iron SandS as per IS 3989

Providing and fixing collar a) 75 mm i) Sand cast iron SandS as per IS 1729

Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved qualityand colo...

Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittingsarrangement of approved quality and colour. a)600 mm long towel rail with ...

Supplying chemical emulsion in sealed containers including delivery as specified. Aa)Chlorpyriphosor Lindane emulsifiable concentrate of 20 percent

Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.)chajja 4 mm thick of required colour, size and design made by ResinTransfer Moulding (RTM) Machine Technology, resulting in voi...

Providing, hoisting and fixing above plinth level up to floor five level precastreinforced cement concrete work in string courses, bands, copings,bed plates, anchor blocks, plain window sills and the ...

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approvedmake in all colours, shades except burgundy, bottle green,...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of ...

Providing and laying non pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1 2 (1 cement 2 fine sand) including testing of joi...

13 6 (1 Cement 3 coarse sand (zone III) derived from natural sources, 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External Work 50 mm dia nominal bore

Providing and fixing HDPE pipes including jointing of pipe and fittingalong with trenching, refilling and testing of joints complete as per direction of Engineer in Charge.250MM DIA.

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1 6 (1 cement 6 coarse sand) including cost of all materials, labour, ...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1 6 (1 cement 6 coarse sand) including cost of all materials, labour, ...

Half brick masonry with Non Modular fly ash bricks of class designation 5.0, conforming to IS 12894, in super structure above plinth and upto floor I level cement mortar 1 4 (1 cement 4 coarse sand) i...

Half brick masonry with Non Modular fly ash bricks of class designation 5.0, conforming to IS 12894, in super structure above plinth and upto floor I level cement mortar 1 4 (1 cement 4 coarse sand) i...

Structural Design and Submission of detailed structural Drawings and Design Calculation for all Structural Members (from the foundation level to Roof level) in Triplicate from Approved qualified Stru...

Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class

Providing and fixing 8 mm dia C.P. or S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer in charge

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1 3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) Greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.7...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized ...

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c to c with cen...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two coats on new work over an under coat of suitable shade with ordinary paint of approv...

CPVC BALL VALVE 50 MM DIA

Sub 3 DVOR Hard standing work at DVOR Earth work by Mechanical Means Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in al...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

Construction of Embankment by excavating the available approved Gravelor Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...

Using Crusher Run Construction of granular sub base 200mm thick using crusher run spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC...

Construction of Dry Lean Cement Concrete 100 mm Thick Sub base over a prepared sub grade with coarse and fine aggregate conforming to IS 383, the size of coarse aggregate not exceeding 25 mm, aggregat...

Construction of M40 grade unreinforced, dowel jointed, plain cement concrete payement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383 2016, maximum ...

Cemented ladder for climbing pedestals to counterpoise.

Sub 2 Deployment of Machinery Deployment of Mobile Hydraulic Crane 20 t capacity with operator including all necessary charges, transportation to work site etc complete and as per directions of Engi...

Deployment of Hydraulic Excavator of 1.2 m wide bucket with operator (JCB) including all necessary charges,transportation to work site etc complete and as per directions of Engineer in charge.

Engaging welding machine with operator,welding rods,wiresorcable etc.for spot welding works (MS and Stainless steel) including all necessary charges,transportation to work site etc complete as per the...

Engagement of Total Station with DGPS with surveyor including all necessary charges,transportation to work site etc complete and as per directions of Engineer in charge.

Sub 3 DIVERSION OF PERIMETER ROAD Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earl...

Earth work by Mechanical Means, Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not e...

Construction of Embankment by excavating the available approved Gravel or Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadi...

Construction of Subgrade and earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading...

Construction of Granular SubBase (Using plant mix method) of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site,spreading in uniform layers...

WMM Providing, laying, spreading and compacting graded stone aggregate mixed with cement to crushed stone treated base specification including premixing the Material with water at OMC in mechanical mi...

Prime Coat over WMM or WBM Providing and applying primer coat with SS1 grade Bituminous Emulsion on prepared surface of granular Base including cleaning with mechanical Broom of road surface and spray...

Providing and laying Dense Graded Bituminous Macadam with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG30, at 4.0 per cent...

Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg per m2 on the prepared bituminous surface clea...

Bitumionous Concrete Grading I For traffic less tahn 20MSA Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premi...

Road marking with hot applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

450MM DIA CONCRETE PIPE Laying Reinforced cement concrete pipe NP4 or prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with ceme...

PCC Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevan...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg per m3 and minimum compressive strength of 4.00 N per mm2 conforming...

Providing 20 mm cement plaster of mix 1 4 (1 cement 4 fine sand) to brickorstone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includin...

Road marking with hot applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied at 1.67L per 10 m2 over and including priming coat of exterior primer applied at 2.20 kg per 10 m²) wit...

INTERNAL ELECTRIFICATION WORKS Wiring for light pointor fan pointor exhaust fan pointor call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface or recessed stee...

Wiring for circuitor submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surfaceor recessed steel conduit as required. 2 X 2.5 sq....

Wiring for circuitor submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surfaceor recessed steel conduit as required. 2 X 4 sq. m...

Wiring for circuitor submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surfaceor recessed steel conduit as required. 2 X 16 sq. ...

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing of modular switch and socket on exisiting modular plate and switch box including connections but excluding modular plate 5or6 A amp switch

Supplying and fixing of modular switch and socket on exisiting modular plate and switch box including connections but excluding modular plate 5or6 A amp plug socket

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5or6 A modular socket outlet and 5or6 A modular switch, co...

Supplying and fixing suitable size GI box with modular plate and cover in on surface or in recess, including providing and fixing 6 pin 5or6 and 15or16 amps modular socket outlet and 15or16 amps modul...

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5or6 A modular socket outlet and 2 nos. 5or6 A modul...

Supplying and fixing of following ways surface or recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned coppe...

Supplying and fixing 5 A to 32 A rating, 240 bar 415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testi...

Supplying and fixing 5 A to 32 A rating, 240 bar 415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testi...

Supply of surface mounted type 1X4 LED luminaries having minimum 2500 lumen output complete with electronic driver, made out of powder coated CRCAorAluminium housing with opaloracrylic diffuser suita...

Supply and fixing of Rechargeable type Emergency portable luminaire (4 feet) etc complete

Supply of outdoor type LED street light fixture of lumens output not less than 6000 lumens, minimum lifetime of 50000 burning hours and having aesthetically designed pressure die cast extruded al...

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent or HPMV or HPSV street light fitting on pole including bending the pipe to the require...

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation, B, 3 nos. blades, 30 cm long down rod, ...

Supply and installation of 300mm sweep, 900 rpm heavy duty exhaust fan suitable for 230or240 volts, 50hz, single phase A.C supply with all accessories including louvers, shutters etc as required.

MAIN ELECTRICAL PANEL Design, Fabrication, Supply, Installation, Testing and Commissioning of LT Panel indoor type with enclosure protection class IP 42 of cubical construction, floor mounted type, f...

UPS OUTPUT PANEL Design, Fabrication, Supply, Installation, Testing and Commissioning of LT Panel indoor type with enclosure protection class IP 65 of cubical construction, floororwall mounted type, ...

Supply and installation of 80kA, Type 1 plus 2 surge protection device for suitable three phase AC system with Neutral in sheet steel enclosure suitable for mounting on wallorabove LT Panel as per si...

SH II, SITC OF SPLIT TYPE AIR-CONDITIONING UNITS Supply installation testing and commissioning of 1.5 TR (4500 K.Cal per hr) split type air conditioners 5 star rated with inverter type compressor, op...

SITC of Digital Dynamic AC Timers latest micro controller based technology with Autoormanual facility for cyclic operation of 02 Nos. suitable upto 2 Ton split Air Conditioners each of any make, Digi...

Supply and fixing of extra copper refrigerent piping beyond standard length of suitable size for the 1.5Tr machines complete with suction or liquid line, control cabling etc including all the access...

Supply and fixing of extra copper refrigerent piping beyond standard length of suitable size for the 1.5Tr machines complete with suction or liquid line, control cabling etc including all the access...

Supply and fixing of extra drain piping beyond standard length of suitable size for the 1.5Tr machines etc including insulation etc complete as per site requirement.

Supply and fixing of 5KVA Stabilizer suitable for operation on 230V, 50Hz with working voltage of 170V to 270V

SH III SITC OF FIRE ALARM SYSTEM Supply installation testing and commissioning of IP based Single Loop microprocessor based intelligent Analogue Addressable Fire Alarm Control & Indicating Panel havin...

Supply installation testing and commissioning of IP based Analogue Addressable Photo Electric Smoke Detector (of same protocol of FDA Panel) with mounting base as per site requirement.

Supply installation testing and commissioning of IP based ddressable Manual Call Point (of same protocol of FDA Panel) as per site requirement.

Supply installation testing and commissioning ofIP based Addressable Loop powered Sounder cum strobe (of same protocol of FDA Panel) as per site requirement.

Supply and fixing of auto dialer in charge programming numbers etc. complete as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600 bar 1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Eth...

Supply and fixing of Fire Extinguishers suitable for ABC and CO2 of 5 Kg. each mounted on wall hooks as per IS 15683 2006 suitable

Supply and fixing of aersol automatic Fire Extinguishers of 5 Kg. as per IS 15683 2006

SH IV CABLING WORKS Supply of laying of following size LT power cable of 1.1 KV grade aluminium conductor XLPE insulated PVC sheathed armoured cable confirming to IS 7098 Part I 1988 with upto date a...

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed or XLPE aluminium conductor cable of 1.1 kV grade as required....

Supply and laying of 50mm DWC HDPE pipe of size 50 mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. For OFC cable.

Supply and Laying of single run 12 core armoured OFC cable through existing HDPE pipeorGI pipe by pullingor blowing-in complete as per specifications as required.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray cable tray with perforation not more than 17.5 percent, in convenient sections, joined with connectors, susp...

Supplying and fixing cable route marker with 10 cm X 10 cm X 5mm thick G.I. plate with inscription there on, bolted orwelded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in groun...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1,4 (1 cement , 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...

Supply and Laying of 6.1 mm 10 Pair armoured jelly filled cable RC cable for laying betn.TWR to NAV AID Equipment room for indication

Supply and laying of CAT 6 cable laying betn.. TWR to NAV AID Equipment room for indication

SH V Communication SystemsSupply and fixing of Media converters similar to MOXA make for converting Electrical signal to Optical or Vice versa

Supply and fixing of 24 Port modular managed switches with 04 SFP plus populated with dual power supply Make CISCOor JUNIPERor ALLIEDTELSSISor BROCADE

Supply and fixing of 08 Port modular managed switches with 04 SFP plus populated with dual power supply Make ISCOor JUNIPERor ALLIEDTELSSISor BROCADE

SH VI EARTHING WORKS Earthing with Copper earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe...

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connectionor terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing s...

Providing and fixing 25 mm X 5 mm Copper strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm Copper strip on surface or in recess for connections etc. as required.

Jointing of existing copper or G.I. tape (with another copperor G I tape) by sweating and solderingorbrazing etc as required.

Supply and laying of copper wire non strandard 4mm dia (Purity not less than 90 percent)

Supply and laying of PVC Insulated copper cable of size 70 sq mm (Purity not less than 90 percent) PVS Colur green

Supply and fixing of Copper rod 1 inch dia and 5 feet long having 90% 2 inch thread one side and other side cone shape

Supply and fixing of GI pipe suitable for GI base plate to mount 4 inch GI pipe, Size 4 inch 10 feet long as per drawing

Supply and fixing of GI pipe with socket and reducer (2 inch to 1 inch) 2 inch X 30 feet Thickness not less than 3mm

Supply and fixing of 2 inch X20feet PVC pipe UV resistant

Supply and fixing of heavy duty PVC pipe plastic corrugated hose 4 inch dia

Supply and fixing of Frangible Fiber Reinforced Plastic (FRP) Pole with GI base plate for installtion lightning arrestors1. Length 4000 mm 2. Outer dia, 100mm 3. Thickness not less than 5 mm 4. Mount...

Supply and laying of insulation floor mat of required size thickness 2.5mm, Std size 1 mtr width X 2mtr length

SH V UPS System SupplyorFixingorTesting and commissioning of 5 KVA (As per CNS Power policy) capacity online UPS with minimum 30 Minutes full load battery backup facility with each battery of 26 AH p...

The UPS battery shall be of Advanced Glass Mat Valve Regulated Sealed Lead Acid Battery Construction (AGM or VRSLAB) in ABS Flame retardant (UL94V O) grade (UL2436) spill containment casing to meet U...

SH,VI PTZ Camera Supply or Fixing or Testing and commissioning of CCTV in IP66 rated enclosures at locations mentioned in Dwg no. RCDU DVOR HUT ELCT LAYOUT 2024 with 30 days data storage shall be, pr...

SH VII Modification Supply, Installation, Testing and commissiong of 100A 3 Pole MCCB 16 KA in existing panel board including cutting, modification as required to make it operational including shunt ...

Erection of metallic pole of following length in cement concrete 1,3,6 (1 cement, 3 coarse, 6 graded 40 mm) foundation including excavation and refilling etc as required. Above 8.00 Meter to 11.00 Me...

Dismantling of 9.00 meter long street light pole including light fittings, comtrol gear box and refixing of fittingand control gear box on reerrected pole

Supply and laying of 2C X10 Sq mm PVC sheathed PVC insulated Aluminum cable direct on soil 30CM below ground level including excavation, refilling , making earth surface good as required at site

Supply and termination of cable glands of size 2CX 10 Sq mm cable as required at site