Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.8 LAccepted-AOC | L1 | Accepted-AOC Ok | |
| 2 | L2₹44.0 L+₹1.1 L (2.63%)Rejected-Finance N A | NEW DELHI | DELHI | 110001 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹44.9 L+₹2.0 L (4.65%)Rejected-Finance A 153 HQ CE EC KOLKATA LEKHAPANI POST TINSUKIA DIST ASSAM STATE | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹47.7 L+₹4.8 L (11.2%)Rejected-Finance 22 319 GALI NO 5 MAHABIR PARK BAHADURGARH 124507 HARYANA | JHAJJAR | HARYANA | 124507 | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹47.7 L+₹4.9 L (11.3%)Rejected-Finance 0 0 GOVERNMENT HOSPITAL ROAD POST AHERI TAH AHERI GADCHIROLI MAHARASHTRA 442705 | GADCHIROLI | MAHARASHTRA | 442705 | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹48.7 L
EMD Value
₹97,400
Closing Date
9 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE E/M BASE HOSPITAL DELHI CANTT
GE E/M BASE HOSPITAL DELHI CANTT-110010
SPL REPAIR TO BLDG NO T-28 AND T-28A (PHYSIOTHERAPY DEPT) AT BASE HOSP UNDER GE (E/M) BASE HOSP, DELHI CANTT-10
2022_MES_542915_1
GE/BH-47/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE E/M BASE HOSPITAL DELHI CANTT
Class D Category a(i)
7 documents required · 7 mandatory
₹500
GE E/M BASE HOSPITAL DELHI CANTT
₹97,400
Yes
6 Oct 2022
10 Aug 2022
12 Sept 2022
10 Aug 2022
9 Sept 2022
25 Aug 2022
Amount
Dismantling Asbestos cement corrugated or semi corrugated sheets in roof covering complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section, in any position framed work complete all as specified and as directed.
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed.
S&F Steel work as in tubular trusses, purlins, rafter, vertical post and similar works including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS- 1161 Gde-YST-240 including one shop coat of zinc chromate primer paint incl prepartion of surface at contractor workshop before fabrication complete all as specified and directed.
S&F plain MS plate incl cutting/ welding & drilling (Fe 410- w Gde-E 250 Quality A) complete all as specified & directed.
S&F Mild steel screw bolts (machine made) dia of neck 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified.
S&F in position galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified high tensile alloy steel trap sheet having 55 MPA yeild strength and zinc (galvanized) + Aluminum combined, coating of 150 GSM /PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to7 micron Epoxy primer fixes. RMR 1040 profile width 1125 mm complete all as specified & directed.
All as per item No 7.00 above but plain sheet as in ridge/ valley gutter.
Demolition/dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified & directed.
S&F GI powder coated snap grid frame work for false ceiling (Size of grid 605X605 mm) complete all as specified and directed.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S&F 4 mm thick Eco building board fixed or laid/inserted to GI/ Aluminium framework with screws complete all as specified and directed.
S&F Solid PVC Wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame acomplete all as specified and directed.
S&F powder coated aluminium anodised section 40 x 44mm x14 gauge for aluminium partition wall in wall in panel 1m x1m covered with 5mm thick plain/frosted tinted glass on top half portion and 5 mm thick Aluminium Composite panel fixed in half bottom portion complete all as specfied and directed.
S&F aluminium powder coated door frame with partially glazed shutters single/ double leaf divided into two glazed panels including aluminium anodised snap beading and rubber gasket/lining for fixing of glass as directed. The frame shall be fixed with aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter will be made out of the following section including fitting:- a) Aluminium anodised door frame 101.60 mm x 44.75 mmx2mm fixed with aluminium thrust bolt in walls by drilling as directed. b) Aluminium anodised sides rail of shutter section 83.5mmx 44.5mm x 2mm c) Aluminium anodised bottom rail of shutter section 150mm x 44.5 mm x2mm. d) Aluminium anodised top and middle rail of shutter section 100mm x 44.5 mm x 2mm. e) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leaf of Make Classic/Argent as approved. f) Aluminium anodised handle 250 mm long of approved Make Classic/Argent 02. No’s in each leaf. h) Glass Pane shall be 5.5 mm thick tinted glass. j) 5 mm thick Aluminium Composite panel and lock including complete all as specified and directed.
Supply, fabricating and fixing windows with frame of aluminium powder coated of extruded aluminium section two track with two sliding shutters with following sections & fitting:- (a) Frame section shall be 63.50 mmx38.10 mmx2 mm thick. (b) Two track bottom rail for sliding of shutters 61.85mm x 31.75mmx2mm thick. (c) Two track top section shall be 61.85mmx31.75mmx2mm thick (d) for sliding shutter handle& 'H' bottom section should be 40mmx(18mm+9)mmx1.45mm thick (e) sliding shutter to be provided with 5.5mm thick sheet glass (Modi/ Saint gobain/ tinted, plain, frosted) (f) stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specified and as directed.
M&L for 18-20mm thick of approved shade granite stone (superior Quality) slab (table rubbed and polished as in floors, jambs, steps, cooking platform etc and the like, over & including 15 mm thick screed in cement mortar 1:4, pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including two strip of line make on (tread of stair case) granite complete all as specified and directed.
M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone grinding and polishing complete over and including Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes etc and the like including round cutting etc complete all as specified and directed.
S&F in repair Stainless steel 20 mm dia curtain rod of medium weight including fixing SS brackets, curtain ring @ 7 Nos/ RM and decorative end/Latto supports etc length exc 90 Cm but not exc 100 Cm complete all as directed.
Demolition of brick work built in cement mortar of any description and including PCC Coping etc and disposal of all debris out side Mod land complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius, using old sise bricks built in cement mortar 1:6 complete all as specified & directed.
M&L for plastering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces, finished the surface even and fair with using WPC @ 2% by weight of cement (if required) complete all as specified & directed. (Note- WPC shall be measured and paid separately as supply only).
M&L for 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even andfair complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in sub base of floors, finished the surface even and rough complete all as specified and directed.
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement plaster in cement mortar 1:4 and finished the surface of plaster rough complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300x600x8mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over and including 10mm thick cement plaster in cement mortar 1:4 and finished the surface of plaster rough complete all as specified and directed.
M&L for preparation of new plaster surfaces and applying two coat distemper oil emulsion over 3 mm thick wall care putty on walls as levelling course complete all as specified and directed.
S&F in repair of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.
S&F 20 mm bore Brass Elbow for fixing of CPVC pipe complete all as specified & directed.
S&F Brass Elbow (3/4 X ½) mm for fixing of CPVC pipe complete all as specified & directed.
S&F 20 mm Brass Tee for fixing of CPVC pipe complete all as specified & directed.
S&F 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of CPVC pipe complete all as specified & directed.
S&F in repair wash down water closet (Pedestal pattern) using vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, Plastic water closet seat, white, recessed bottom pattern and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed.
S&F in repair PVC low level 10 lit capacity valve less syphonic action type flushing cistern with inlet ball valve and handle including brackets complete all as specified and directed.
S&F in repair PVC connections of 15mm size with PTMT nuts of 600mm long complete all as specified and directed.
S&F in repair bib taps chromium plated 15mm alloy with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed.
S&F in repair 15 mm bore angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed withr iron pipe of union complete all as specified & directed.
S&F in repair CP soap dish compete all as specified and directed.
S&F in repair CP 600 mm long towel rail compete all as specified and directed.
S&F in repair CP health faucet with 1 mtr flexible tube and hook compete all as specified and directed.
S&F in repair CP paper holder fixing to wall with ss screw compete all as specified and directed.
S&F in repair 15 mm bore Brass CP wash hand besin mixer for mixing hot & cold water screwed down complete all as specified and directed.
S&F in repair 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/Floor, complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) bends any radius with oval access doors complete all as specified and directed.
S&F in repair 75 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F in repair PVC (SWR) vent cowl suitable for 110 mm bore of pipe complete all as specified and directed.
S&F in repair 110 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal complete all as specified and directed.
S&F in repair grating dome 100 mm dia of PTMT (minimum weight 25 gms) complete all as specified nad directed.
Taking down of chowkhat or frame (without taking off shutter from frame) area not exc 1.50 Sqm each including builder hardware fitting complete all as specified and as directed.
All as per item No 54.00 here-in-before but area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed.
S&F solid PVC moulded door frame of size 50x47mm, made out of 5mm thick one side prelaminated and other side plain colour PVC sheet & edges will be painted to match with prelaminated sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and as directed.
S&F Factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F 100mm size, stainless steel butt hinges, fixed with Stainless steel screws complete all as specified and as directed.
S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150mm size extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.
S&F in repair 4 mm thick Aluminium Composite panel cladding of approved quality and colour as approved by GE,fixing in MS frame at any height and including MS frame of size not exc 0.36 sqm (used in rect angular tubes of size 50.8mmx 25.4mm x 2.9mm thick or square tubes 38mm x38mm x 2.9 mm thick are used in frame) and filling the joints with all weather silicon sealant including all mouldings, cuttings, etc complete all as specified and directed (Make- ACP Aluedecor, Alstrong, Wonder alu Board over seas, VIVA and Eurobond.
M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight not less than 4.00 Kg/ Sqm with non woven polyster fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps etc as per manufacturers instruction. (c) M&L for finishing of top surface by applying two coats of aluminium paint complete all as specified and directed. (d) The work shall be carried out by authorised applicator of manufacture only as approved by GE.
Cutting grooves 75 mm wide & 65 mm deep in brick wall/ RCC surfaces at any location shaping horizntal face with mechanical cutter and grooves filled with PCC 1:2:4 type B-0 (using 12.5 mm gradded stone aggregate) mixed with chemical compound SUPER LATEX OR DR FIXIT OF PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD mixed with proportion 200 ml per 50 kgs cement as per manufactures instruction all as specified & directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings complete all as specified and as directed.
M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in soft/loose soil complete all as specified & directed.
Removing of excavated materials to a distance not exceeding 50 M and deposing where directed at a level not exceeding 1.5 M above the starting point complete all as specified & directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil complete all as specified & directed.
M&L RCC M-25 using 20 mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slab, under reamed piles and mass concrete complete all as specified & directed.
M&L RCC M-25 using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified & directed.
M&L RCC M-25 Using 20 mm stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed.
M&L RCC M-25 Using 20 mm stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified & directed.
M&L for mild steel 10 mm dia TMT bar and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified & directed.
All as per item No 73 above but mild steel tmt bar 6mm to 8 mm dia.
Use and waste of formwork to sides of concrete foundations, plinth beams, footings, base of columns, pile caps and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed.
Use and waste of formwork to sides of concrete pillars, post, struts, piers, columns and similar work, square, rectangular or polygonal rough finished surfaces complete all as specified and as directed.
Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, Chhajja, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified & directed.
Use & waste Formwork to soffits of suspended slabs such as roof slabs,flat, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished complete all as specified & directed.
Use & waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed.
S&F in repair 1000 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm ball brass valve with polythene float and fly nut complete all as specified and directed.
S&F stop/Gate valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 20 mm dia, fixed complete all as specified and directed.
S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors including taking doun old GI pipe complete all as specified and directed.
Description all as per item No 82 above but 20 mm dia.
Supply only integral WPC complete all as specified & directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc to be measured separately) and making good disturbed surfaces of wall floor etc complete all as specified and directed.
Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed.
M&L point wiring for modular switches with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn through concealed Conduit 25 mm as requirement of site including cadmium plated screws as per ISI, size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light/Bell point controlled by one switch 5 Amps one way single polecomplete all as specified and directed.
All as per item No. 87 above but one fan point controlled by one switch 5 Amps one way single pole.
All as per item No. 87 above but one three pin 5 Amps socket out let on independent board.
All as per item No. 87 above but one three pin 5 Amps socket out let on same board.
All as per item No. 87 above but point wiring of copper cable multi stranded 2.5 Sqmm size for 15 Amps socket outlet on independent board with 2.5 Sqmm size of earth conductor complete all as specified and directed.
All as per item No. 87 above but point wiring of copper cable multi stranded 4.00 Sqmm size for AC point wiring with 4.0 Sqmm size of earth conductor complete all as specified and directed.
S&F in repair Ceiling rose, PVC/ polycarbonate, isolated body type three terminal, 240 volt complete all as specified and directed.
S&F in repair Modular switch piano, flush button type, single pole, one way 10 Amps complete all as specified and directed.
S&F in repair Modular switch piano, flush button type, single pole, one way 15 Amps complete all as specified and directed.
S&F in repair Modular socket outlet 3 pin and 2 pin, 10 Amps, flush type complete all as specified and directed.
S&F in repair Modular socket outlet 2-in-1, 3 pin, 10 and 20 Amps, flush type complete all as specified and directed.
S&F in repair Fan step regulator, 120W - 2 module suitable for ceiling fan complete all as specified and directed.
S&F in repair for Modular Bell push 6A 1 module complete all as specified & directed.
S&F in replacement Bell ding dong, AC, 230 Volts, fixed in position & connecting complete all as specified and as directed.
S&F in repair Lamp holder, white Polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting complete all as specified & directed.
M&L in repair sub main wiring with 2 runs of 4 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 25mm medium grade fixed to the surface of walls/ ceiling as per ISS and one run of 4 sqmm eath wire size PVC insulated copper conductor complete all as specified and directed. (Note. Two run of cable and earth conductor and conduit shall be measured as one length).
M&L in repair sub main wiring with 2 runs of 10 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 32mm medium grade as per ISS and one run of 10 sqmm size earth wire PVC insulated copper conductor complete all as specified and directed. (Note: Two runs of 10 sqmm copper FRLS cable & one run of 10 sqmm copper cable in and including 32 mm PVC conduit medium grade will be measured as one unit.
S&F in repair distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.
S&F in repair load line distribution board double door type, TPN, vertical, 4 way, complete suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including bus bar, neutral link, blanking plates etc complete all as specified and directed.
S&F in repair load line distribution board double door type, TPN, vertical, 8 way, complete suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including bus bar, neutral link, blanking plates etc complete all as specified and directed.
S&F in repair MCCB 415 V, 125 Amps, 36 KA, 4 Pole complete all as specified and directed.
S&F in repair MCB DP, 240 Volts, 40 Amps complete all as specified and directed.
S&F in repair MCB DP, 240 Volts, 63 Amps complete all as specified and directed.
S&F in repair MCB SP, 240 Volts, 10 Amps complete all as specified and directed.
S&F in repair MCB SP, 240 Volts, 16 Amps complete all as specified and directed.
S&F in repair MCB SP, 240 Volts, 32Amps complete all as specified and directed.
S&F in repair MCB SP, 240 Volts, 63 Amps complete all as specified and directed.
S&F in repair Bldg security light fitting LED 45 Watt cast aluminium housing, toughened glass,silicon gaskect, high power LED with lens for uniform istribution pre-wired and electric connection with suitable size of stranded copper flexible PVC insulated wire including GI bracket 1.5 Mtr, 40 mm dia with clamps and bolts complete all as specified and directed. Make - Havells Cat Part No- ENDURAPERLNEOSL45W LED757PASYTOPC or equivalent model of make mentioned in PS.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 3 connected to earthing test point including testing on completion all as directed. Note:- The unit rate quoted shall be include for necessary excavation and earth work, earth strip connected to test point max 7 mtr as per site requirement, PCC 1:3:6 type for earth pit & Pit cover, funnel with wire mesh including GI medium grade watering pipe 15mm bore & 25 mm dia for supporting of earth strip/wire.
S&F in repair of modular white cover plate with frame, 1/2 module complete all as specified & directed.
S&F in repair of modular white cover plate with frame, 3 module complete all as specified & directed.
S&F in repair of modular white cover plate with frame, 4 module complete all as specified & directed.
S&F in repair of modular white cover plate with frame, 6 module complete all as specified & directed.
S&F in repair of modular white cover plate with frame, 12 module complete all as specified & directed.
S&F in repair after taking down rusted sunken box by modular metal flush board 1/2 module complete all as specified & directed.
S&F in repair after taking down rusted sunken box by modular metal flush board 3 module complete all as specified & directed.
S&F in repair after taking down rusted sunken box by modular metal flush board 4 module complete all as specified and directed.
S&F in repair after taking down rusted sunken box by modular metal flush board 6 module complete all as specified and directed.
S&F in repair after taking down rusted sunken box by modular metal flush board 12 module square type complete all as specified & directed.
S&F in repair recessed Type Full window opal Diffuser Ultra modern recess mounting LED Panel 2x2of not more than 36W, size 595X595x65mm (Nominal) suitable for Existing false ceiling with CRCA powder coated White Housing & Isolated Electronic Driver with Output Short-circuit protection, Surge Voltage protection min 3KV, safety & performance test as per IS:15885 Part 2/Sec 13. Total system Lumen not less than 4200 in Cool day Light(5700K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours. Complete with all accessories as required with connections. All above mentioned Specs will be verified through NABL Certified LM79 & LM80 Report before supply of LED Fixture onsite complete all as specified & directed. Make - Havells cat part No. - PLANO2X2PLR36WLED857S or equivalent model of make mentioned in PS.
S&F in repair Surface/ Wall Mounted 10W integrated LED 2 feet Fitting with Epoxy powder coated white polycarbonate channel housing. Total system Lumen of 10W Led should be 800 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>100 Lm/w, THD(%) < 20, Complete with all accessories as required with connections complete all as specified & directed. Make- Havells cat part No- LUMILINEBS10WLED865SPCWH or equivalent model of make mentioned in PS.
S&F in repair Surface/ Wall Mounted integrated LED 4 feet Fitting of not more than 20w with polycorbonate housing & opal diffuser finish , Integral electronic driver with Output short circuit protection, Surge Voltage Protection of min 3 KV and Safety test as per IS15885 Part 2/ Sec 13. Total system Lumen not less than 2000 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy100 Lm/w, THD(%) < 20, LED with Average life of 50000 Burning hours. Complete with all accessories as required with connections. All above mentioned Specs will be verified through NABL Certified LM79 & LM80 Report before supply of LED Fixture onsite complete all as specified & directed. Make - Havells cat part No -LUMILINEBS20WLED865SPCWH or equivalent model of make mentioned in PS.
S&F in repair sheet metal enclosure with socket plug top single pole, neutral enclosure with a two pin earth plug, socket complete with one MCB of Cap 25 Amps, 240 V complete all as specified and directed.
S&F in repair of five star rated Geysers of cap. 25 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell made up of copper, automatic cutoff , including electrical and water connection with hot and cold water connection pipe (PVC type) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete all as specified and directed. Note:- Old unserveciable Geyser will be deposited to MES store yard.
S&F in repair exhaust fan 250 mm sweep 240 Volt plastic type, connection with flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. Note:- Old unserveciable exhaust fan will be deposited to MES store yard.
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .