Supply and Installation of Water Tank and Fabrication of Water Tank pedestal for RO Unit at SDH Bhaderwah

Amount

The work involves complete site clearance and preparation for the Water Tank Pedestal. The scope includes removal of unwanted materials, vegetation, debris, and dismantling of existing structures obstructing the construction area. The job also covers breaking and removal of old or damaged RCC (reinforced cement concrete) structures, such as existing foundations, floor slabs, and plinths within the designated site boundary. All RCC breaking work shall be carried out using suitable mechanical breakers or manual tools, ensuring safety of workers and nearby structures. complete scope of work had from SBD

The water storage tank shall be of 6000 liters nominal capacity( 3 tanks x 2000 liters), rotationally moulded from virgin, food-grade, UV-stabilized Food Grade suitable for potable water storage in hospital applications. The tank shall be manufactured as a seamless, cylindrical vertical tank with a closed top and flat bottom design to ensure complete structural integrity and leakproof performance. The material used shall be non-toxic, odorless, and resistant to corrosion, chemical attack, and ultraviolet degradation, ensuring a minimum service life of 15 years under normal operating conditions. The tank shall conform to relevant IS 12701:1996 (latest revision) or equivalent international standards for rotationally moulded polyethylene water storage tanks. complete scope of work had from SBD

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. complete scope of had from SB

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:complete scope of had from SBD

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing andreinforcement. All works upto plinth level complete scope of had from SBD

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: complete scope of had from SBD

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level complete scope of work had from SBD

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. complete scope of work had from SBD

The pump shall be a horizontal, single-stage, self-priming centrifugal type with 1-inch suction and 1-inch delivery flanged connections, suitable for potable and service water applications. The pump casing and impeller shall be of high-grade cast iron (IS 210 FG 200), dynamically balanced, with a stainless-steel shaft (SS304) and mechanical seal of Carbon/Ceramic type to ensure leakproof operation. The pump shall be capable of delivering 8 m³/h discharge at 30 meters total head, with a maximum suction lift of 6 meters under normal operating conditions. It shall be provided with a foot valve, non-return valve, and priming plug for smooth self-priming operation. complete scope of work had from SBD

The pipe shall be High-Density Polyethylene (HDPE), manufactured from virgin PE-100 grade material conforming to IS 4984:2016 or equivalent international standard for potable water applications. The pipe size shall be 25 mm outside diameter (1 inch nominal bore) with a standard pressure rating of PN 10 (10 bar working pressure), unless otherwise specified. The material shall be UV-stabilized, non-toxic, corrosion-resistant, and suitable for continuous operation at water temperatures up to 45°C. complete scope of work had from SBD

Zephyrwings solution pvt ltd (BID ID -2690873)