Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.4 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹18.4 L+₹1.7 L (10.5%)Rejected-Finance NO 650 3RD CROSS MATHIKERE BANGALORE 560 054 | BENGALURU URBAN | KARNATAKA | 560054 | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹41,000
Closing Date
27 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli Bangalore 560013
8668REPAIR MAINTENANCE OF CERTAIN B R WORKS IN STONE BLDG AND PERIODICAL SERVICES IN DOMESTIC AREA TMQ AREA UNDER AGE B R WEST OF GE M AF JALAHALLI BANGALORE
2022_MES_535024_2
8668/E8
Open Tender
Civil Works
Item Rate
333 days
Garrison Engineer M AF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT PUBLIC FUND ACCOUNT
₹41,000
21 Oct 2022
6 Aug 2022
29 Aug 2022
6 Aug 2022
27 Aug 2022
13 Aug 2022
6 Aug 2022 - 8 Aug 2022
Amount
Taking down wooden Shutters of any description n exc 1 sqm each and refixing same opening
Taking down wooden Shutters of any description n exc 1 sqm each
Taking down wooden shutters of any description exc 1 Sqm and n exc 2 sqm and refixing same opening
Taking down wooden shutters of any description exc 1 Sqm and n exc 2 sqm
Demolition of brick work built in cement mortar or cement lime mortar and archor pillars etc but excluding ashiar taclings dressed stone work and pre cast concrete articles
Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided
Dismantling of timber scantling 40 Sq cm and over in section in any position in framed work
Taking down wooden chowkhats or frames with shutters area exc 1.5 Sqm and n exc 4 sqm each and removing from the site
S&F of 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as directed
S&F of Glazed and skeleton shutters of 2nd class hard wood 30 mm thick shutters, open rebated and prepared (receive glass, gauze etc (without sash bars) edges of framing plane, chamfered or rounded, fitted with cut and miltered beeds for securing glass etc, size of members of shutters as specified in SSR Part I Section 8 Clause 8.20 (a) supplied and fitted to chowkhats
S&F for 35 mm thick 2nd class HW factory made panelled shutters with panel of 12 mm thick veneered commercial plywood kiln seasoned chemically treated with 15 x 6 mm edging all around the panels.
Resecuring or easing & adjusting, without taking down shutters of any description n exc 1 Sqm each complete all as directed by Engr in charge
All as per Ser item No 13 here in before but exc 1 sqm and n exc 2 sqm each
Taking down wooden chowkhats or frames with shutters area n exc 1.5 Sqm each and removing from the site
S&F of Factory mode 30 mm thick PVC panelled door shutter, manufactured by M/S rajshree or equivalent ,made from MS tube of 19 gauge x 19 mmx19mm for styles and 15mm x for top & bottom rails, covered with heat molded PVC channel of 5mm thick sheet and 30x 50mm wide to from styles and 5mm thick x 75 mm wide PVC sheet for top rail and lock rail on either side and 5mm thick x200mm wide crass PVC sheet as gap insert for top rail and bottom rail paneling of 5mm thick PVC sheet fitted with MS frames elded/sealed to styles and rails with PVC sheet beading either side jointed together
S&F of Factory made PVC choawkats or frames of size 50x 47mm with wall thickness made out of extruded 5 mm rigid PVC foam sheet mitered at corner and jointed with 2 Nos of 150mm long brackets of 15mm x MS square tube the vertical door prattles to be reinforced with 19 x 19 mm MS square tube of 19 gauge EPDM rubber gasket door frame to be fixed to wall using MS screws of 65/100mm size complete as per manufacture’s specification
S&F of aluminium anodised, barrel tower bolt 150mm of extruded section
S&F of aluminium anodised, barrel tower bolt 100mm of extruded section
S&F in rep 300 mm long Mild steel sliding door bolts (bolt type) stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section
S&F MS butt hinges medium weight cold rolled 100 mm size
S&F of 75mm long butt hinges
S&F of Mild steel pressed handles, oval type, stove enamelled black 125 mm long
S&F of Alu anoldised handle 125 mm long in repairs
S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc
S&F Galvanised MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanized wire staple and including fixing with beads supplied with joinery incl MS Flat 15 x 3 mm thick with hole to receive wire mesh incl nut bolt
As per item No.27 but Galvanised stainless steel cloth in repairs.
M&L two coats of synthetic enamel paint over a priming coat of pink primer incl preparation untreated surfaces of wood or wood based material exc 10 cm width or girth
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L glazed ceramic designer coloured tiles of size 300 x 200 x 7 mm thick as in vertical surface such as skirting / dado, set, jointed in neat cement slurry and pointed in white cement using pigment to match color of tiles incl 10 mm thick plaster in CM 1:4 complete all as specified & directed
S&F of non skid tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but n exc 0.11 Sqm in floor etc set and jointed in neat cement slurry out pointed in white cement to match incl screed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes
M&L for pre-cast cement concrete block masonry type C1, 1:3:6 (using 20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in mortar complete built in CM 1:4 all as directed
M&L for Pre-cast cement concrete block masonry type C1, 1:3:6 (using 20 mm graded aggregate) with solid blocks, n exc 10 cm in width and setting in mortar complete built in CM 1:4 all as directed
M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as internal surfaces of walls
M&L for rendering 15mm thick in CM 1:4 mixed with water proofing compound (over external/roof plaster under WPT) for fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. (Note : WPC shall be measured & paid seperately)
M&L three coats of white washing on walls including preparation of new plastered surface.
Supply only integral water proofing compound ISI marked
Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above GL)
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in subbase, paving and plinth protection finished even and smooth without using extra cement.
M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in flooring finished even and smooth using extra cement.
S&F of cement concrete chequered pre polished any coloured tiles 30cm x 30xm x20mm to 25 mm thick, machine pressed; set, jointed and pointed in net coloured pigment in floors,incl screed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes incl dismantling
M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in copings, roof kerbs or mud stops, rounded or chamfered on edges etc complete all as directed
M&L for reinforced cement concrete (nominal mix) type B1, 1:2:4 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as directed
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping)
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L 2nd class hard wood scantling clean sawn, timber framed and fixed
All as per Ser item No. 47 above but except timber
Dismantling of fillets, rails, post, rafter, purlin etc.under 40 sq cm in section
M&L for plain fillets, square, rectangular or triangular in sec exc 13 & n exc 25 Sq cm clean sawn secured with nail or screwed to fixed shelves 2nd class hard wood
Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm
M&L for 2nd class hard wood clean sawn batten sectional area exc 5 & n exc 15 Sq cm at 30 cm centre to centre
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering
S&F of pre- painted galvatume aluminum zinc coating GI based corrugated steel based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F of pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge to fixed with self tapping screws as specified
Dismantling of AC or corugated, semi corugated, etc. Sheet roof coverings
M&L for 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs fixed with L or 'J' bolts
All as per Ser item No. 57 above but except sheets
M&L for asbestos cement two piece adjustable serrated ridge 6 mm thick for corrugated or semi corrugated sheets fixed with ‘L’ or ‘J’ type bolts
Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles
M&L for roof tiles Mangalore pattern inter locking at side joints laid dry all as specified
All as per Ser item No 61 above but except tiles
M&L for ridge or hip tiles to suit Mangalore pattern roofing tiles bedded and jointed in cement mortar 1:6
Dismantling wall and ceiling boards any description, any thickness, including cover fillets and frames
M&L for providing and fixing 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid with and including GI powder coated snap grid work of size 605 mm x 605mm with main runner 28 x 19x 0.40 mm thick, cross tee 28 x 19 x 0.40 mm and 23.5 x 23.5 x 1.5mm thick and 19 x 15 x 0.40mm thick wall angles fixed to wall for ceiling including necessary support with 6 mm dia GI hangers (upto 1200mm length & 1200mm c/c distance)fixed to roof slabs, purlins/ rafter complete all as specified and as directed
M&L 4mm thick Asbestos cement plain building boards, fixed to timber framework with screws, fixed in ceiling, flat or sloping in repairs etc complete.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc
M&L for machine cut cudappa stone slab 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match to shade of slab including rubbing and polishing and 15 mm thick screed in cement motar 1:4 complete all as specified complete.
Rounding to edges of cudappa stone slab on edge, such as in steps, cooking plateform and other similar situation
Supply only glass dividing strip 38 mm x 3mm in PCC floor
Hacking out old broken glass (any thickness, size, quality or description) from wooden/Steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete
S&F of sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane
Taking up or down water tubing of any description and connector 15 mm bore in new or old position (wall ceiling floor etc)
Taking up or down water tubing of any description and connector 20 mm bore in new or old position (wall ceiling floor etc)
Re-fixing only steel water tubing 15mm bore
Re-fixing only steel water tubing 20mm bore
S&F of GI tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors
S&F of GI tubing 20 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors
S&F in repairs 15mm dia Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed
All as per Ser item No 79 above, but for 20mm dia Gun-metal, globe or gate valves, with iron wheel head
S&F in repairs 15mm dia Bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms)
S&F in repairs 15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms)
S&F in repairs 15mm bore stop valve of PTMT of any colour screwed for iron pipe complete
S&F in repairs grating square 150mm size of PTMT (Minimum weight 100gms) with white cement complete all as directed
S&F in repairs viterious china white wash hand basin flat back white in colour ISI marked of size 550 mm x 400 mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brakets 2 Nos embedded in CM 1:4 type B-1 size 30m x 20 cm x 20 cm complete
S&F in repairs PTMT shower rose 75 mm dia
S&F in repairs PVC connections 45 cm long incl 15 mm bore fly nuts on bathe ends complete
S&F in repairs pvc flexible Waste pipe 32mm dia
Demolition and bracking up drain pipes 100 mm dia (salt glazed ware, AC or reinforced concrete) set in cement mortar incl bend and dimension piece etc complete
All as per Ser item No 89 but 75 mm dia of pipes
S&F of 110mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to floor/wall complete all as specified
S&F of 75mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to floor/wall complete all as specified
S&F of PVC (SWR) bend 110 mm dia
S&F of PVC (SWR) bend 75 mm dia
S&F of 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required for 100/110mm dia
S&F in repairs viterous china squatting pan Orissa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc incl provisioning of lime concretes
S&F in repairs vitreous china wash down water closet, padestal pattern, white in colour incl white seat cover ISI marked 'P' or 'S' trap, fixing bolt and jointing
S&F in repairs high/low level cistern with brackets flush pipe etc complete and supply and fixing PVC low level cistern syphonic action type including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for EWC & indian type WC
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed
M&L for preparation of old decorated wall surfaces and applying one coat of white wash all as specified
M&L for washing, rubbing down and stopping of distempered surfaces of walls and applying one of distemper all as specified
All as per item No 102 above but for ceiling
M&L for Complete removal of existing treated surface finishes and applying 3 mm avarage thick Birla care wall putty including filling up of all nail holes,one coat of primer and applying two coat of OBD all as specified and directed
M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of cement base paint all as specified
M&L for preparation of old painted wall surfaces and applying one coat weather proof paint all as specified and directed
M&L for preparing old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed
All as per Ser item No 108 hereinbefore but on steel surfaces
S&F in repairs PVC flexible waste pipe 40mm dia for sink WHB.
M&L for taking down of existing sunken slab treatment from the sunken portion and removing of existing filling of sunken, cleaning the surfaces washing down with water and rubbish off the primises, cleaning and filling cracks with sealing compound, brushing neat cement [email protected]/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) (using 12.5mm graded stone aggregate) on sunken slab portion including filling of brick bats and finishing the top surfaces even and smooth without using extra cement . (b) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXIT pidfin 2K manufactured by M/S Pidilite industries Ltd or equivalent) and followed by a overlay protective screed 15mm thick CM(1:3) alongwith liquid water proofing compound approved make on top surfaces of sunken slab after prepration as mentioned above method of application for acrylic cementitious water proofing coating and applying APP based polymeric membrane minimum weighing 4kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application is followed as per manufacturers instruction complete all as specified and directed.
S&F in repairs for 8 feet 4 pipes pulley operatoed cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes).
M & L for 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling water tanks and removing to store .
S& F in repairs Health faucet CP for iron pipes 15 mm bore with all accessories complete.
S&F in repair waste coupling 100mm top dia of CP fixed to steel sink (half or full thread)
Supplying and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilling or laying in floores of 16 mm bore with all fittings and fixed complete all as specified
Maruthi constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .