CERTAIN B/R AND E/M WORKS IN OTM ACCN OF TECH AREA AT AIR FORCE STATION YELAHANKA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough.

M&L Non skid Digital Havana Olive Dark-M (400mmX400mm) ceremic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cemetn slurry and pointed in white or coloured cement to match.

M&L for rendering 10mm thick in cm 1:4 on fair faces of brick work or concrete surfaces for back coat complete all as specified and directed by Engr-in-Charge.

M&L for glazed Digital Havana Olive (Dark/Light -M) (400mmX800mm) ceramic coloured tiles for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over , complete all as specified and as directed.

S&F in repairs Powder coated aluminium annodised section for door/window/ventilator not less than 2mm thick and for fully glazed door with 5.50mm thick tinted/frosted glass with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S&F in repairs Powder coated aluminium annodised door/Windows/ventiliator shutters aluminium section weighing 0.55kg/m including necessary joining, fixed type, cleats, glazing clips, rubber neoprene packing, handles 02 nos in each door, hinges, anodised alumnium snap beading, screw etc, complete all as spd.

S&F in repairs 8.00 mm thick frosted toughened glass, quality and glazing with aluminium beading in square exc 0.5 sqm in each pane.

Taking down door chowkats or frames exceeding 1.5 sqm but n exc 4 sqm with shutters (without taking off shutters from the frame) of any description

M&L for 1st class hard wood (Teak wood) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints including mirror polishing complete all as specified and directed.

S&F 40mm thick Factory made first class hard wood, (Teak wood) Solid construction shutters including mirror polishing complete all as specified and directed.

S&F flush door 40mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge.

Cutting holes in brick/stone wall for inserting holdfast and making good dismantled portion in CM 1:3 or PCC 1:2:4 type -B0 using 12.5mm graded stone aggregate depth of embedded portion of holdfast exc half brick but n exc one brick all as specified and directed.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M &L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and directed.

S&F 200 mm long Brass barrel tower bolts, with barrel of extruded section and rolled or cast bolts

S&F 300 mm long Brass sliding door bolt with sand or die cast brass hasp , staple ( bolt type) and fixing bolts with rolled or drawn brass bolts

S&F 250mm long Brass sliding door bolt with sand or die cast brass hasp , staple ( bolt type) and fixing bolts with rolled or drawn brass bolts

S&F 125mm Butt Hinges, extruded brass, with mild steel hinge pin, bright polished and fixed , type C11

S&F 150mm Floor door stoper of Brass body body and tongue, with hard drawn steel spring, fixed in floor

S&F 150mm Extruded Brass handles, fabricated type polished

S&F in repairs hydraulically regulated door closer designation no.03 universal type,suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge.

S&F in repairs Single Piece EWC with cistern, soft close seat cover and twin flushing fittings of size wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed by Engr-in-Charge. Make:Catalogue No FNS-WHT-40751S220UFSM & FNS-WHT-40201 of Jaquar or its techno commercial equivalent.

S&F in repairs for vitreous china Under Counter sunk Modular wash basin white flat back size 190X550X430mm including cutting for and pinning in ends of brackets including of fixing of 32mm low density polylethyne pipes (LDPE)of pressure rating 6kg/cm2,coupling, PVC connection with 15 mm PTMT cheknuts, brackets all complete as directed by Engr in Charge Make:Catalogue No FLS-WHT-5701 of Jaquar or its techno commercial equivalent.

S&F in repairs CP Towel ring of including fiitings of neccessary screws etc.complete all as specified and directed by the Engr-in-Charge. Make:Catalogue No AKP-CHR-35721P of Jaquar or its techno commercial equivalent.

S&F in repairs CP health fauccet of including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make:Catalogue No ALD-CHR-577 of Jaquar or its techno commercial equivalent.

S&F in repairs swan neck Pillar cock CP 15 mm dia all as specified and as directed. Make:Catalogue No FLR-51793 of Jaquar or its techno commercial equivalent.

S&F in repairs 15mm dia PVC connection 450/600 mm long all as specified.

S&F in repairs brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe complete all as specified and directed by Engr-in-Charge. Make:Catalogue No ALD-769L300x190 of Jaquar or its techno commercial equivalent.

S&F in repairs 15 mm dia two way bib taps with wall flange (fancy type), cast copper alloy with screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make:Catalogue No FUS-29041 of Jaquar or its techno commercial equivalent.

S&F in repairs Angle cock with wall flange 15 mm dia Fancy type. Make:Catalogue No FUS-29053 of Jaquar or its techno commercial equivalent.

S&F in repairs Soap Dish all as specied and directed by Engr-in-Charge. Make:Catalogue No AKP-35743P of Jaquar or its techno commercial equivalent.

S&F in repairs toilet Paper holder with Flap Recessed Type (Stainless steel), , all as spd and directed by Engr-in-Charge. Make:Catalogue No AKP-35753PS of Jaquar or its techno commercial equivalent.

S&F in repairs Corner Glass shelf with bracket, in repairs, all as specified and directed by Engr-in-Charge. Make:Catalogue No CAN-1173 of Jaquar or its techno commercial equivalent.

M&L for 25 mm thickness Granite( of any size) work in WHB/ cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including crew cutting for any type of work.

S&F in repairs Vitreous china urinals with urinal Droplets sensor consealed type white or colour, including necessary (wall/tile) cutting and matching the same surface all as specified and directed by Engr-in-charge. Make:Catalogue No Q357610110 of Hindware or its techno commercial equivalent.

S&F in repairs for 10mm thick Modular frosted Glass Partition with openable door toughen glass enclosure with accessories for urinals / bath room partition all as specified and directed by Engr-in-Charge.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store.

S&F CPVC pipes outer dia 20 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F CPVC pipes outer dia 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repairs PVC(SWR) bends 110mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall 75 mm bore including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repairs PVC(SWR) bends 75mm dia complete all as specified & directed by Engr-in-Charge.

M&L for 75mm dia of outlet PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge.

Dismantling of old wall, Ceiling boards (Fibre,pulp,insulation,etc) or insulation boards /slabs blankets,including cover fillets and frame work.

S&F of ceiling board 12mm thick in ceiling fixed with screws all complete as per manufacturer’s instructions .

S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR and as directed by Eng-in-charge.

Dismantling timber scantlings 40 sq.cm and over in section, in any position un framed work all as specified and directed by Engr-in-Charge.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints including mirror polishing complete all as specified and directed.

M&L for 19/20mm thick pre laminated block board exterior grade decorative type with decovative face veneer on both face, fixed with screws to timber frame work all as specified and as directed fixed in repairs

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm Printed PVC sheet suitably placed in false ceiling grid made of Aluminium / G.I. / M.S. as per specification and drawing

S&F GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre.

S&F Hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flate 40X30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.

M&L for complete removal of existing treatment from walls by scrapping,washing down etc and and applying two coats of distemper oil emulsion white or tinted over one coat of primer complete all as specified and directed.

M&L for 3mm thick wall care putty on wall surfaces all as specified and directed by Engr-in-charge

Material and labour for preparation of old surface and applying one coat of exterior emulsion on floors/wall surface all as specified and as directed.

Material and labour for preparation of old steel surface and applying one coat of aluminium paint to Gate and other surfaces all as specified and as directed

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc, removing materials to store, or keeping in safe custody for re-use at site or offering credit,& making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down carefully aluminium sub main wiring and offering credit including making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Point wiring complete with 1.5 sqmm single core PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade with multistranded copper conductor drawn through concealed PVC conduit not less than 20mm dia and including provision of PVC insulated heavy duty copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators Including fixing PVC round block 8 cm dia and 4 cm in depthetc., for the following:-

One light/Exhaust Fan point controlled by one switch.

One switch socket outlet point 3 pin 5 Amps on same board with other switches.

All as per item No 63 above but wiring with 2.5 sq mm copper cable with 2.5 sq mm for one earth continuty cable for 6 pin 15 Amps socket out controlled by 15 Amps switch.

Supply and fix Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminals.

Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Modular Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 3 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 8 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR METAL FLUSH BOX Metal flush box 3 module ISI marked including flushing the Box inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fix MODULAR METAL FLUSH BOX Metal flush box 6/8 module ISI marked including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated heavy duty ISI Marked unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 20 mm dia non matallic rigid PVC white conduit and conduit accessories concealed, and including provision of PVC insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade 4 Sqmm for earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed by Engineer-in-charge.Note:- Two Run of 4 Sq mm, One Run of 4 Sqmm And PVC conduct is measured as one Run or one Meter.

Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Eng-in-Charge.

Supply and fix in repair LED light fitting (mirror light) with high out put diffuser, 2 feet long, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size and two round block for mounting tubelight fittings including dismantling old unsv fitting complete all as specified and directed by Engr-in-Charge.

Supply, installation and commissioning lighting control sensor for switching lighting system depend on brightness and movement, suitable for ceiling installation (recessed/surface mounted) including dust protection socket, switch off delay approximately 10 seconds to 30 minutes or short time pulse adjutable, remote control possible via IR service remote control all as specified and directed by Engr in charge. Make : ABB model No 6818 U-500 or its techno commercial equivalent.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete.

Supply and fix in repair sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 4 way Double door complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fixing MCB Single pole and Neutral, 230 volts, 32 Amps, 'C' Curve, 10 KA, including disconnecting, taking down old/unserviceable, MCB Single pole and Neutral complete all as specified and as directed by Engr-in-charge.

Supply and fixing MCB Single pole, 230 volts, 5 to 32 Amps, 'B' Curve, 10 KA, including disconnecting, taking down old/unserviceable, MCB Single pole and Neutral complete all as specified and as directed by Engr-in-charge.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth all as directed

M&L for provision of hole on the wall for fixing of the exhaust fan and connecting with the ceiling rose complete all as specified and directed by Engr-In-charge.

NOTES: 1.Considering the emergent nature of work for upcoming Swarnim Vijay Varsh in the mid of Oct 2021,the work has to be undertaken and completed before the said event. 2.Contractor has to employ maximum labours (in Two shifts) at the worksite for early completion of works, so as not to interfere with the event,as the site will be utilised during the event. 3.Work has to be executed in two shifts during day and night everyday for the successful completion of works before the event. 4.Approvals for all the items needs to be taken immediately after acceptance so that there is no delay in finalising the same. 5.Contractor must adhere to revised security and work protocols keeping the event in view.

Moulya Builders

shri veerabadreshwara enterprises

Raghu M Contractor

Gnani Builders

PURVIK CONSTRUCTIONS

Mahant Construction Co.

Vinayaka Enterprises

M/S. ADARSH ENTERPRISES