Supply of Centrifugal Pump with non-flameproof motor including supply of all commissioning spares and 2 years mandatory spares, supervision during installation and commissioning for Sulphuric acid unloading pump

Design, Engineering, Manufacturing, Fabrication, Assembly, Testing, Inspection by TPI, packing and Supply of Centrifugal Pump with non-flameproof motor including supply of all commissioning spares & 2 years mandatory spares, supervision during installation & commissioning for Sulphuric acid unloading pump at ETP at IOCL Guwahati Refinery

Supply of pump with non-flameproof motor on common base frame, coupling & coupling guard, Anchor bolts, with 1 set of companion flanges, gasket, bolts and nuts, suction strainer, foundation bolts.

Set of impeller (Full dia)

Impeller nut

Shaft

Shaft Key – coupling end

Shaft key - impeller end

Shaft key – any other fitted on the shaft (Note: If more than 1 part no is applicable, bidder to provide break up cost of each item)

Set of shaft sleeves

Set of case wear rings

Set of impeller wear rings

Set of throat bushing

Set of throttle bushing

Set of Pump body gaskets / o-rings

Set of Pump brg cover gaskets/ o-rings

Set of gasket / o-rings /seals–any other fitted on pump (Note: If more than 1 part no is applicable, bidder to provide break up cost of each item)

Set of oil seals as applicable

Set of constant level oilers

Set of deflectors/ bearing isolators

Set of mechanical Seal (Complete assembly) With sleeve and gland plate

Set of mechanical Seal parts: a. Seal Faces (stationary) (For bellow type, set shall mean face along with bellows)

Set of mechanical Seal parts: b. Seal Faces (Rotary) (For bellow type, set shall mean face along with bellows)

Set of mechanical Seal parts: c. Secondary Seal as applicable

Set of mechanical Seal parts: d. Gaskets/O-rings & Packings

Set of mechanical Seal parts: e. Spring and Pins, Screws

Complete coupling (balanced)

Set of Balance drum and balance sleeve insert (if provided)

Set of bearings with bearing pads – DE side

Set of bearings with bearing pads – NDE side

Flushing oil cooler (in case of plan-23)

Any other spares as per offered pump’s requirement

Set of motor bearing

NDE side end Shield

DE side End shield

Cooling Fans

Cooling fan cover

Terminal box with studs, insulators & connectors

Grease cup

Complete set of instrument spares as applicable

Per diem site supervision charges

VARAT PUMP AND MACHINERY PVT.LTD