Green Space Park Development at Heritage Jayendhera Nagar Park

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, ,and baling out water and cleaning and levelling the site etc.,complete

Supplying and filling the foundation and basement with stone dust in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Brick work in Cement Mortar 1;5 mix using country bricks 8³/4x41/4x23/4 incluiding all the cost and conveyance of materials from an approved quarry including all the labour charges curing etc completed as per standard specification

Plain Cement Concrete 1:1.5:3 (one cement, one and half fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Supplying and painting the walls with two coats of cement paint as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Supplying and laying Rubberised interlocking Paver block M40 grade 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Supply and filling gravel including cost and conveyance of materials from and approved quarry including all labour charges for filling etc completed as per standard specification

Supply, Delivery and Providing Three Seater back slope Granite stiff sitting benches 5 feet in length 1.50 feet width 600x450x100 mm size Hard Granite slab side walls, 150x45x100 mm size bench slab back slope slab including cost and conveyance and fixing in position etc complete

Supply, Delivery and Providing single seater Granite stiff sitting single round bench (Stool type) 100mm thick 45cm granite slab for bench slab and 150mm dia on middle and 30cm on end posts including cost and conveyance and fixing in position etc

Supplying and fixing of Double Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seatr is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc complete as directed by the dpeartmetal officers

Supplying and fixing of slide for below 12 years old childrens to a length of 3.00 m with 80mm dia leaver and 40mm top bar with MS pipes. The seater is of moulded plastic. The ladder frme is made up of 25mm M.S. ppe., hanrail 20mm dia MS pipe and the centre support is 80mm dia MS pipes. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of Jungle Gym for below 12 years old childrens to a height of 2.10m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The ladder frame is made up of 25mm M.S.Pipe, hanrail 20mm dia M.S. Pipe and the centre support is 80mm dia M.S. Pipe The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of 6 Metre Length Single Bracket Pole with Base Plate(250 x 250 x 6mm)76.10mm OD x 3.65mm Thick x 6000mm Length including cost of light fitting foundation works Complete

Supply and fixing of 30 W LED light including cost of light fitting foundation works Complete

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.Ele. SD -197

Providing various designs of Animal Dust bins made of 3 layer fiber structure with multi colour powder coating. The height of the dist bins 4 feet available models are penguin, Rabbit, Fish and monkey Q

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

25mm PVC pipe

90mm PVC pipe

25mm PVC Elbow

90mm PVC Bend

Conducting Geophysical Survey, Quality and Quantity test and transportation charges etc.(This includes labour charges in the field,rent of the vehicle for reaching the place,rent of the Instrument and excluding charges for the Geologist)

Drilling of 150mm dia Vertical bore in hard rock area by using DTH RIG including labour charges for inserting casing pipe assembly in the drilled hole including the transporting charges for the rig and supporting vehicle etc. complete.

Supply and delivery of 150mm dia PVC Plain casing Pipe with ISI make including cost and conveyance of all materials and all other labour charges etc. complete as per SS. Note:- Approximate length of pipe is given the length may be decided as per site conditions during drilling of borewell.(With slots and with out slots)

Supply and delivery of 200mm dia PVC Plain casing Pipe with ISI make including cost and conveyance of all materials and all other labour charges etc. complete as per SS. Note:- Approximate length of pipe is given the length may be decided as per site conditions during drilling of borewell.(With slots and with out slots)

Supply and delivery of 1.5 HP Submersible pump set as per IS 8034/2002 With out panel Board 20x lpm x 125m including cost and conveyance of materials to work site etc complete.

Supply and delivery of 2HP single phase panel board with two level guard and auto start including cost and conveyance of materials to work site etc complete.

Supply and delivery of following PVC,HDPE,Gi pipes and specials etc completed

32mm dia HDPE pipes for sub-mersible pump in bore well class PE 100 9PN 16)as per IS 4984/2016

8" dia bore cover

32mm dia Bore clamp

32mm dia GI Elbow

32mm dia SS Hose collar

32mm dia GM NRV

32mm dia PVC MTA

32mm Dia GI pipe

Nylon Rope

32mm dia GI Flange Set

32mm PVC Pipe

32mm PVC Elbow

Supply and delivery of jointing of PVC insulated and sheathed 2.5 sq.mm 3 core flat type copper cable conforming to IS 694/1990 etc complete as per standard Specification

Wiring with 2x1.5 Sq.mm(22/0.3)PVC insulated unsheathed Sc Cu .conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.t switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point SD 18

Labour Charges for the erection of submersible pumpset in borewell including fixing and jointing submersible cable with proper clamps upto the starter to the required depth and also fixing of riser pipes to required depth values erection clamps,pressure gauges up to the exterior wall of pump room and erextion of panel board consisting of TPICN switches starter,voltmeter,ammeter,three pilot 9indicating) lamps capacitor single phasing preventor ,water level guard and laying and jointing the cables and twin earthing and jointing the cables and twin earthing as per as per I.E. rules etc. complete and testing the pump set and trail run for 10 days Upto 5HP

Supply and delivery of MS Kiosk of size 0.75mx0.45mx0.75m made up of MS angle of size 50mmx50mmx4mm alround covered with 16gauge MS sheet and Kiosk door made up of MS plates of size 25mmx3mm including cutting,welding,grinding .locking arrangements and labour charges etc

Supply Delivery of HDPE Tank as per IS 12701/1996 of size 2000 litres capacity bearing with ISI mark providing 3 Nos. of 20mm Tap Connection with check nut, washer nipple arrangement and 1 No. of 25mm of scour and 32mm for over flow arrangement etc. complete.

supply and fixing of TNEB meter Board suitable for 32A Single phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank size of 375mm x300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable boult and nuts for fixing the tw plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit(SD 125

Earthing as per P.W.D standard with an earth electrode of 2mtr class "B" GI pipe of dia not less than 32mm complete with necessary masonry work as SD 234

Supply and fixing of Single Twister Sitting Twister- Outdoor Gym Equipment Maximum User Weight of 100 kilogram, Main Central Pipe & Main Frame Pipe of 100mm dia G.I. Pipe with 3.6mm Thickness Standing/ Sitting Twister Frame Pipe 32 mm G.I. Pipe 32 mm dia with 3.2mm Thickness, Disk Support Pipe at Bottom Pipe 80 mm dia G.I. Pipe, Rotating Disk Support, Handle Frame Pipe 32mm dia G.I. pipe Thickness with 3.2mm Thickness,Foundation Pipes 750mm deep GI pipe, supported with M.S. Angle 25 X 25 X4mm of Foundation Pipe 100mm with 3.6mm Thickness,Ball Bearing Foot Rest Aluminum casting material inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Rower Maximum User Weight 120 kilogram, Main Central Pipe 100mm dia G.I. Pipe Heavy, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, 32mm dia G.I. Pipe, Connecting Links Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 12 millimeter 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm Seat and Back Rest 2.5mm thick, M.S. Perforated with uniformbending radius to avoidsharp edges Bearings Tapered Roller Bearing inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Air Walker/ Stroller Single Maximum User Weight 110 kilogram for Main Frame 125mm dia G.I. Pipe, 40mm dia G.I. Pipe Leg Movement Frame Pipe, Handle Frame 25mm dia G.I. pipe, Tapered Roller Bearing Foot Rest Aluminum castingmaterial MS Foundation Plate Thickness 12 millimeter, Foundation Pipes 750mm deep GI Pipe, supported withM.S. Angle 25 X 25 X4mm inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Chest Press SINGLE for Maximum User Weight 100 kilogram, Main Central Pipe 100mm dia G.I. Pipe, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, Seat and Back Rest 2mm Thick G.I. Seat with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Leg Press Single Maximum User Weight 100 kilogram, Main Central Pipe 80mm dia G.I. Pipe, Moving Frame Pipe 80mm dia G.I. Pipe, Foot Rest Frame/ Foot Rest Hinging Pipe 25mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm, Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and delivery of 12 Mtr long mini highmast lighting pole fixed type swaged mild steel tubler pole lamp post with round bracket suitable for six Nos fitting fixing and painting with one coat red oxide and one coat Aluminium paint pole bottom section size 161 mm x 4.50 mm thick at 6.0 mtr long.Middile section 139.70mm odx3.2mm thick x 6.0 mtr. Base palte 300mmx300mmx6mm thick with fuse box with fuse unit SMC fuse box, 4 pole MCB, 4 way concector, cable sleeve pipe 40mmxA classx1.2 mtr and earthing with GS wire, 2.5 sqmm copper wire for fitting to SMC junction inter connection supply and fixing 6 Nos of 150 W LED Flood Light with Integrater driver Ereection and delivery of 12mtr long mast lighting pole in earth with suitable concerting of the pole with 1:2:4 cement with 40mm jelly for foundation to a depth 2.0 mtr breath 0.40 mtr x0.4 mtr below the ground level including 6" thickness mat concrete at the bottom of the pole and with suitable coping pedestal with cement concreteing with 20mm jelly to height of 0.3 mtr above ground surface as per standard specification and as directed by the department officers. Design and casting of suitable foundation with foundation bolt RCC cement concrete including steel cement centering jelly and stand including earth work excavation and refilling assuming the SBC as 10 including fixing of Aviation lamp ftting with base plate and coupling arrangements as per standard specification and Internal wiring 2x10 sqmm from Control pannel box to Lights and laying and jointing of 2x16 sqmm LTUG Cable from EB pole to Minimast control box supply and fixing of Single phase timer on off switch internal wiring works with earthing of PWD standard Earthing and electrode of 2 Mtrs Class B GI pipe on not less than 32mm dia with necessary masonry work and including EB meter Box and connection works etc complete

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting with Ready Mixed Enamel Paint over the new wood works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.