CWE/GGN/GT-56/2025-26 ADDN/ALTN TO CERTAIN MARRIED ACCN AT AF STN NARELA UNDER GE (AF) GURGAON

Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided complete etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition ) of any description in any position not specifically provided complete complete all as specified.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc.

Demolition of Mud in roofs, any thickness including plastering and leeping, (whether full thickness removed etc including roof tiles complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using (40 mm graded stone aggregates) as in sub base of flooring etc complete all as specified.

M&L for 40 mm thick plain cement concrete flooring type B-1, 1:2:4 (20 mm graded crushed stone aggregate) finished even and smooth without using extra cement complete all as specified.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified.

M&L 10 mm thick rendering in cement mortar (1:3) on vertical surfaces for backing of tiles etc complete all as specified.

M&L for Non - skid (joint free) coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for Non - skid (joint free) coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for Glazed ceramic coloured tiles in vertical surface 600X300X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admixture of pigment to match with shade of granite complete all as specified.

Providing edge moulding to 18-20 mm thick stone(any description) of counters vanities etc, including machine polishing to edge to give high gloss finish etc. Complete to Granite stone any description.

M&L providing, cement concrete (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof padding, sub base of floor coping or roof kerbs on roof chamfered on edge rounded or chamfered on edges including trowelling slightly complete all as specified & as directed. Note : (i) Min thickness of PCC shall be 30mm. (ii) Integral water proofing liquid admixture shall be measured and paid seperately under appropriate item here in after. (iii) PCC shall be laid to acheive true slope towards the drain/weep holes

M&L for applying a coat of based water proofing compound (1 part powder : 1 part liquid) of desired consistency with nylon brush @ 5 Sqm/Kg coverage over vertical/ horizontal surfcae of RCC roof and parapet complete all as specified.

M&L water proofing : (a) surface preparation - Mild chipping of the surface, clean the surface with Bio wash (b) If onliner leckage found seal with Bond coat. Open the crack by making 'V' groove, filling cracks with Crack filler. (c) Apply carbon based shorter chain Bond Coat (d) Providing and applying water base water proofing compound one coats after surface preparation using Brush, non containing toxic material like Pb, Cr, Zn having defect free nano particle with inhabiting properties with contact angle of water more than 75 degree, permeable type with elongation (stretch ability) of more than 300%, in a nano structure self assembled dispersion system with VOC level of less than 1%, 60 micron DFT. (e) If an crack found open and fill the crack with carbon base filler and bond coat and use wall filler to reduce the undulation. (f) Apply hingh penetration Bond coat two coat. (g) Providing and applying Barrier Coat Paint/ Water base water proof paints 2 coat over screed concrete using brush, not containing toxic material like Pb, Cr, Zn having defect free nano particle with inhibiting characteristics having bacteria killing and anti fungal properties, with super-hydrophobic properties with contact angle of water more than 750, with elongation (stretch ability) of mor ethan 300% in nano structures self assembled dispersion system with VOC level of less than 1% 60 micron DFT per coat. complete all as specified.

Supply only integral water proofing compound marked complete all as specified and directed.

Removing bldgs demolished materials / debries exc. 1.50 km but n exc. 5 km and depositing where directed.

M&L for brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified.

M&L for half brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:4 etc complete all as specified.

M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work not exceeding 200 mm thick rough finished in flat surface complete all as specified.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 5 cm but n exc 10 cm wide rough finished complete all as specified.

M&L for rendering 15 mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified.

M&L for 15 mm thick plastering in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement), complete all as specified.

M&L rendering 10mm thick in cement mortar (1:3) as in ceilings finished even and smooth (without using extra cement) complete all as specified.

M&L for providing 1-3 mm thick wall care putty on wall on wall before applying oil bound distemper and making the surface uniform complete all as specified. Note: OBD to be measured and paid seperately

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified.

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified

M&L for preparation of plastered or unplastered old decorated surfaces by complete removal of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible , filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper over a coat of primer on walls complete all as specified and as directed. Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat. (b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. (c) Wall care putty shall be measured and paid seperately.

All as per item No.35 here-in-before but on surfaces of ceiling complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality complete all as specified

M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall/ceiling surface including filling of holes and cracks with with suitable material like cement or plaster of paris etc thus make surface smooth upto 4th storey buildings complete all as specified and as directed.

M&L for guniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in cement mortar (1:4) on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement plumb and making surface true to geometry in line and including necessary form work to be carried at upto double storey building. Note.- Where ever reinforcement required will be measured and paid seperatly etc complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified.

Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm and removing from site.

S&F for Pressed steel frames 125X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified.

S&F for Pressed steel frames 105X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified.

M&L cement concrete (1:3:6) type C1, (using 20 mm graded stone aggregate) as in filling of door frames of pressed steel and in bed blocks etc complete all as specified.

S&F factory made 35mm thick flush shutters , solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified.

S&F solid PVC door frame of size 50mm X47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of prelam PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable prelam PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified.

S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified.

S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed.

S&F 300mm, ordinary rat tail made of brass rod pattern springs including roller and roller plate complete

S&F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed.

S&F in repair floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

S&F door seal bottom with aluminium plate and rubber insulation 42'' x 1.5'' complete all as specified.

S&F window or ventilator section of frame 72x55 mm fixed to wall or concrete surface with rowl plug made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based stell as per IS 513 "D" quality galvanised as per IS 277 with Zinc of 120 gms/sqm) glazed and wire guage shuetter prepare to recieve wire mesh to the shutter (Double door shutter) with total coated thickness of 0.60 mm including grill;s/guarde made of square bars powder coated fixed to window frame with screw including necessary fittings and all builders hardware such as handles, tower bolts and stays complete all as specified. Note : Glass and wiremesh shall be measured and paid seperately under respective items

S&F powder coated anodized aluminum frame for partition, doors, windows, ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F powder coated Anodised aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S&F for 4.80/5.0 mm thick frosted glass ordinary quality and glazing each pane n exc 0.50 Sqm fixed with neoprene rubber gasket in aluminium frame work complete all as specified.

Hacking out old broken glass (any thickness, size, quality or escription) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty, rubber strip or wooden beads complete all as specified.

S&F mild steel Godrej pattern cupboard with back, sides, top, bottom, 02 shelves & mild steel shutter two leaves with frame , incl necessary fittings of 18 gauge MS sheet with locking arrangement and handle etc all as per Godrej pattern with duplicate keys including necessary fittings & 19mm stainless steel rod for hanging cloths & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos fasteners.The cost of fasteners & grouting them is deemed to be included in unit rates complete all as specified and as directed. Note:- Superficial area shall be measured, Approx Size (1100x1900x600mm) .

Dismantling boarding of any description , fixed in any position with nails complete all as specified and as directed.

Supply & Fixing of 18 mm thick 100% solid WPC (Wood Polymer Composite) plain board (minimum density 650 Kg/Cum) fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by Engr-in-Charge.

Supply & Fixing of 18 mm thick 100% solid WPC (Wood Polymer Composite) board (minimum density 650 Kg/Cum) of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet shutter/drawer front shutters complete as per specifications and as directed by Engr-in-Charge.

Supply & Fixing of 12 mm thick 100% solid WPC (Wood Polymer Composite) plain board (minimum density 650 Kg/Cum) fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by Engr-in-Charge.

S&F 20 mm wide & 1 mm thick PVC edge bending of PVC pasted on edges with suitable adhesive, complete as specified and directed.

Supply & Fixing of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete as per specifications and as directed by Engr-in-Charge.

Supply & Fixing of Ball bearing runners 45 mm telescopic channel (20 inch) full extension load capacity 50 kgs (Make: Hettich,Ebco,Prime)

Supply & Fixing of stainless steel handles 100 mm size for kitchen cabinet/cupboard shutters (Make: Hettich,Ebco,Prime)

Supply & Fixing of chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 558x500 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime)

Supply & Fixing of chromium plated stainless steel wire basket (cup and saucer basket) pull out type size 558x300 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime)

Supply & Fixing of chromium plated stainless steel wire basket (Jar basket) pull out type size 585x150 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime)

Supply & Fixing of chromium plated stainless steel wire basket (Thali basket) pull out type, size 380x500 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime)

Supply & Fixing of chromium plated stainless steel wire basket (Cutlery basket) pull out type, size 380x500 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime)

Supply & Fixing of chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 380x500 mm with necessary sliding frame structure etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime)

Supply & Fixing of chromium plated stainless steel wire basket (Storage/plain basket) pull out type, size 380x500 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime)

Supply & Fixing of chromium plated stainless steel wire basket (Bottle pull out) pull out type , size 150 to 200 mm with necessary sliding frame structure etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime)

S&F 75 mm Butt hinges, Stainless steel and fixed complete all as specified.

S&F 150 mm tower bolt, Stainless steel and fixed complete all as specified.

S&F door magnet catcher with screw for kitchen cabinet/cupboard shutters complete all as specified and directed..

S&F 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, including decorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps to fixed to walls complete all as specified.

Dismantling of cast iron pipe up to 100 mm dia, jointed in cement mortar and taking out in trenches/Wall if required etc complete all as specified.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or floor complete all as specified.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or floor complete all as specified.

S&F 75 mm dia PVC (SWR) vent cowl complete all as specified.

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified.

S&F 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified.

S&F 75 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified.

S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal with rubber rings joints fixed as required complete all as specified.

S&F 75 mm dia PVC (SWR) junction single, (Single T) equal or unequal with rubber rings joints fixed as required complete all as specified.

S&F 50 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints including bend, tee, laid in trenches/ floors/walls complete.

S&F Salt-glazed stoneware gully traps (150X150) mm, square or round mouthed, type 'P' complete all as specified.

M&L PVC (SWR) 75 mm floor trap plain with grating including jointing with solvent cement complete all as specified.

S&F PVC (SWR) 'P’ trap 125 mm complete all as specified.

S&F 110mm PVC (SWR) WC connector bent type complete.

Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store. complete all as specified.

Complete all as per item No. 104 here-in-before but 20mm dia .

Cutting chases, pinning in. making good to facings where required andpointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall etc complete all as specified.

S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified.

Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and fixing in CPVC 20mm Brass Elbow

Supply and fixing in CPVC 20mm Brass Tee

Supply and fixing in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA)

Supply and fixing in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA)

Supply and fixing in CPVC 25mm Tank Adaptor

Supply and fixing in CPVC 25mm Union

Supply and fixing in CPVC 20mm Ball valve

Supply and fixing in CPVC 25mm Ball valve

S&F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified.

S&F in repair white vitreous China wash down water closet pan (pedestal pattern), and trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified.

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified.

S&F in repair vitreous china pedestal pattern wash hand basin (flat back) white of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, waste pipe, flange end bedded in red lead cement and other end fixed including cutting for and pinning in ends of brackets complete all as specified.

S&F Soap dish of chromium plated or stainless steel fixed to wall with chromium plated brass screws.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified.

S&F brass CP mixer for mixing hot & cold water with bend pipe for overhead shower screwed down for iron pipe 15 mm dia and fixed complete with water saving aerator complete all as specified.

S&F in repair 15mm dia stop valves, fancy type, chromium plated with long shank and cup (concealed type), high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repair 15 mm dia angle valve, cast copper alloy screwed down high pressure, fancy type chromium plated screwed both ends for iron pipe or unions complete all as specified.

S&F in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket with water saving aerator complete all as specified.

S&F in repair pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with swan neck spout screwed for 15mm bore iron pipe and fixed complete all as specified.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified.

S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.

S&F in repair 100 mm chromium plated grating complete all as specified.

S&F chromium plated health faucet telephonic type with 8mm dia, 1 meter long CP flexible with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified.

S&F for rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified.

S&F for rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified.

S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including one number chromium plated waste fittings 40 mm dia & waste pipe complete all as specified and as directed.

S&F kitchen plate rack stainless steel 1 mm thick of size 60cmx75cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.

S&F rolled mild steel in framed work as in doors or steel gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified.

S&F 1.60 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for cooler stand, doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M&L Cutting holes not exc. half brick in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

M&L for cement concrete type B-1, 1:2:4 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified.

M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F Hard drawn steel wire fabric weight per square metre n. exc 4kg cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt

M&L 100 mm thick PCC 1:4:8 tybe D-2 using 40mm stone aggregate as in subbase complete all as specified

M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified.

M&L for 22-25 mm thick chequered designer coloured tiles (matt/glass finish), size, colour and shape as approved by GE, set and jointed in neat cement slurry and pointed with coloured cement to match etc complete all as specified as directed.

M&L Cement concrete type B0, 1:2:4(12.5 mm graded aggregate) as in coping and chamfered for edges complete all as specified and directed.

S&F 20mm medium grade galvanized steel tubing with all fittings bends, elbow, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc of required size) laid in trenches including taking out/down old u/s Gi pipe of any type and size complete all as specified.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m depth, area not exc 10 Sqm on plan for foundation of poles/laying of cables/ stay/ strut and getting out in soft/loose soil complete all as specified and directed.

Returning, filling including spreading, levelling , watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material (soil) n exc 50m and deposting where dirceted at a level not exc 1.50 mtr above the starting point complete all as specified and directed.

Cutting existing 50mm bore GI water pipe line in position for insertion for new tee for taping new pipe line with existing complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody for reuse or taking in schedule of credit and making good disturbed surfaces of walls, floors etc all as specified as directed.

Dismantling and taking down fluorescent tube light Single/double of any wattage or Size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for reuse or taking in schedule of credit.

Taking down unserviceable sub main wiring of any type/Size including wires, conduits,bends,tees/battens etc complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable MCB, MCCB DB's/AC's box with MCB/MCCB to deposit in store for keeping in safe custody for reuse or taking in schedule of credit of any Size/rating complete all as specified and directed by Engr-in-charge.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of Size 1.5 sqmm drawn through in and including concealed PVC conduit Size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal box of suitable Size with 3mm thick plastic laminated sheet cover / modular white cover plate with frame as required module & modular metal flush box as required module for mounting switch, socket and fan regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of Size 1.5 sqmm and making good, disturb surface as it is, all as specified and directed for the following. Note :- Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green

One light point controlled by one,one way switch.

One ceiling fan/exhaust fan/Air ciculator /bell point controlled by one way switch.

Socket 3 pin 5 Amps on the same board, complete all as specified.

Socket 3 pin 5 Amps on independent board , complete all as specified and directed.

One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables, complete all as specified and directed.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of Size 2.5 sqmm drawn through in and including concealed PVC conduit Size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal box of suitable Size with 3mm thick plastic laminated sheet cover / modular white cover plate with frame as required module & modular metal flush box as required module for mounting switch, socket and fan regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of Size 2.5 sqmm and making good, disturb surface as it is, all as specified and directed for the following. Note :- Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green

M&L for sub main wiring with two Single core 4Sqmm stranded copper conductor PVC insulated and unsheathed cable IS marked and 25 mm dia medium grade, PVC conduit concealed in wall for submain connecting including 1 run 4 Sqmm PVC insulated unsheathed copper conductor IS marked as earth wire Complete all as specefied and directed. (i) Two run of 4.00 sqmm single core cable with one run of 4.00 sqmm earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. (ii) Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

Complete all as per item No 171 herein befoe but submain wiring with 2x10Sqmm and 1x10 Sqmm as earth wire Complete all as specefied and directed. (i) Two run of 10.00 sqmm single core cable with one run of 10.00 sqmm earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. (ii) Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S&F of socket outlet 5 Amp 5 pin flush type, 240 Volts with polycarbonate body complete all as specified and directed

S&F of socket outlet 6 pin, 5 Amp/15 Amp multi purpose 2 in 1 flush type, 230 volts with Polycarbonate body complete all as specified and directed

S&Fof switch piano flush type single pole one way 5 Amp 240 volts with polycarbonate body complete all as specified and directed

S&F of switch piano flush type Single pole 15 Amp 240 volts with polycarbonate body complete all as specified and directed

S&F of switch piano bell push flush type Single pole 5 Amp 240 volts with polycarbonate body complete all as specified and directed

S&F ceiling fan regulator stepped electronic type 300 watt rating, 230 volts, with polycarbonate body complete all as specified and directed

M&L for ceiling rose bakelite 63x50mm three terminal PVC polycarbonate isolated body complete all as specified and directed

Supply and fixing metal plug and socket single pole and neutral with a two pin and earth plug and socket alongwith one single pole MCB of 20 Amp suitably fixed in weather proof metal enclosure Complete all as specified and directed

S&F MCB DB with Bus bar 200A neutral link, earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 Volts double door type regal grey horizontal type complete all as specified and directed :

S&F Load line vertical MCB DB A frame made out of CRCA sheet double door surface mounting VPTN 4 way 415 volts 200 AMp rate bus bar and stove enamels dust and vermin proof suitable for TP/FP A frame MCCB of 125 Amp, MCB for outgoing complete all as specified and directed :

S&F MCCB 125 Amp 4 Pole, 16 KA for fixing in DB all as directed by Engr-in-Charge.

Taking down ceiling fan/ exhaust fan from site safely and deposited to MES store for further refixing the same Complete all as specified and directed

Fixing only ceiling fan received from MES store and connecting up including provision of cable from ceiling rose or connector to fan Complete all as specified and directed

Supply and fix heavy duty copper wound exhaust fan, steel body AC single phase 230 volts of size 300 mm sweep 1400 RPM douvble bearing with 04 nos blade frame legs and louvers complete with making arrangement for fixing of exhaust fan on steel/ Aluminium frame window/ making openinf in brick wall as per site requirement and also making good to disturbed surface as per matching to existing complete all as specified and as directed.

Supply and fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) Complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm complete with making arrangement for fixing of exhaust fan on steel/Aluminium frame window/making opening in brick wall as per site requirement and also making good to disturbed surface as per matchng to existing surface complete as directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fixing LED building light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and L shape GI pipe bracket of 40 mm dia. complete.

S&F MCBs 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB of fwg cap :- (DB will be measured and paid separately under respective items of sch A):-

MCB C curve SPN 40 to 63 Amps.

MCB B curve SP 5 to 40 Amps

Supply and fix LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable Size from ceiling rose complete all as specified and as directed.

Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable Size complete all as specified and as directed .

M&L for study lamp with holder bulb 10 watt 220 volts & metal canopy with three core flexible copper conductore cable of suitable size complete all as specified and as directed

M&L for decorative type wall light with LED 9 watt bulb 220 V with three core flexible copper conductor cable of suitable size complete all as specified and as directed

M&L for Multi musical type Buzzer AC 230 volts Single pole complete all as specified and as directed

M&L for earthing to DB/Panel complete with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI wire 4 mm Dia as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision 20 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point including taking out old u/s earthing of any size and type complete all as specified & directed . NOTE: (i) The concrete pit shall be PCC 1:3:6 type C-140 mm thick pre cast cover slab of RCC(1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in the electrical plate No.3 of MES SSR Part -1 (ii) item includes the cost of 7.5 m GI pipe for protection of earth strip. (iii) PCC pits extra cost of addtional length of watering pipe,bends elbows etc.shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length Galvised Iron wire

Supply, laying, jointing and testing XLPE LT insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 volts grade earthed system and conforming to IS:7098 of 1995 and of size 3.5 core x 50 Sqmm and laid in trenches/ ducts/ pipe or on pole including taking out old u/s cable of any size and any type complete all as specified and directed

Supply, laying, jointing and testing XLPE LT insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 volts grade earthed system and conforming to IS:7098 of 1995 and of size 3.5 core x 35 Sqmm and laid in trenches/ ducts/ pipe or on pole including taking out old u/s cable of any size and any type complete all as specified and directed

Supply, installation commissioning and testing of outdoor LT feeder pillar box size 600x600x450 mm and 3.15mm thik CRCA sheet weather and vermin proof CPRI approved with copper bus bar 400 Amp suitable for LT cable 1.1 KV 4 core of size upto 185 sqmm incl provision of cable entries with glands locking arrangements and angle iron frame and legs of 90 cm long using 60x60x6 mm size MS angle iron fixed in floor in PCC 1:4:8 type D2 base of suitable size including necessary excavation earth work and taking down old u/s pillar box complete all as specified and directed..

M & L boring of holes under road pavment hard standing by trenchless technology using ultra sound technique and necessary machine incl HDPE pipe of 100mm dia suitable for 0.4 mpa working pressure complete all as specified and directed by Engr-in-charge.

M&L for earthing to DB/Panel complete with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to main earth strip 25x4 mm galvanised ironstrip by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision 20 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point including taking out old u/s earthing of any size and type complete all as specified & directed . NOTE: (i) The concrete pit shall be PCC 1:3:6 type C-140 mm thick pre cast cover slab of RCC(1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in the electrical plate No.3 of MES SSR Part -1 (ii) item includes the cost of 7.5 m GI pipe for protection of earth strip. (iii) PCC pits extra cost of addtional length of watering pipe,bends elbows etc.shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length Galvised Iron strip of 25x4 mm size.

M&L for dry sand cushioning to under ground cables with 8 cm thick before laying cables and 15cm thick after laying (total 23 cm) and compaction till 18 cm for complete all as specified & directed. Note : Sand Compacted thickness 18cm shall be considered for measurement and payment purpose.

M&L for Brick protection cover of UG cable by old size bricks common burnt clay bricks, sub class 'B' grade laid dry and flat abutting each other with width equal to legth of brick and gap between adjucent brick not exceeding 10mm complete all as specified & directed.

Net Contract Sum will be after deducting Sch of Credit of Rs 1,52,722.00

Please Enable Macros to View BoQ information