SPECIAL REPAIR TO SHAFT AREA OF MAP BUILDINGS AND MISC WORKS AT CAMERO COMPLEX UNDER GE (AF) SUBROTO PARK, DELHI CANTT-10

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering plaster in CM (1:6) 10 mm thick on fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to Nine storey height bldg and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge.

M&L rendering plaster 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement up to Nine storey height bldg and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge.

M & L rendering plaster 5mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement etc built in cement mortar and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge.

M&L for preparation of new plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of primer incl 3mm thick elastomeric wall care putty on walls up to nine storey height building complete and specified and as directed by engr-in -charge.

M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty, up to Nine storey height building complete all as specified and directed by Engr-in-Charge.

M&L for preparation on new or previously untreated wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over putty up to nine storey height building complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing old surface wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface over putty up to nine storey height building complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new plastered or unplastered surface and applying three coats of white wash on ceiling up to nine storey height building complete and all as specified and directed by engr-in -charge.

M & L preparation of old plastered surface and applying two coats of white wash on ceiling up to nine storey height building complete and all as specified and directed by Engr-in -Charge.