Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹53.4 L+₹1.1 L (2.03%)Rejected-Finance 53 13 A OUTER CIRCULAR ROAD KILPAUK GARDEN COLONY CHENNAI 600 010 | CHENNAI | CHENNAI | TAMIL NADU | 600010 | L2 | Rejected-Finance Being other than lowest tenderer | |
| 3 | L3₹54.8 L+₹2.5 L (4.77%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest tenderer | |
| 4 | L4₹55.2 L+₹2.9 L (5.47%)Rejected-Finance 19 C CUDDALORE MAIN ROAD PEDDANAICKENPALAYAM PO TK SALEM DIST PIN 636 109 | SALEM | SALEM | TAMIL NADU | 636109 | L4 | Rejected-Finance Being other than lowest tenderer | |
| 5 | L5₹58.6 L+₹6.3 L (12.1%)Rejected-Finance 126 NARANG COLONY JANAK PURI NEW DELHI 110058 | NEW DELHI | NEW DELHI | DELHI | 110058 | L5 | Rejected-Finance Being other than lowest tenderer |
Tender Value
₹60 L
EMD Value
₹1.2 L
Closing Date
18 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri. Narinder Singh, IDSE, SE(SAG)
COMMANDER WORKS ENGINEERS CHENNAI PALLAVAN SALAI CHENNAI 600 002
PROVN OF ALUMINIUM WINDOWS IN KV SCHOOL BLDG AT IGOE UNDER GE CHENNAI
2023_MES_587321_1
88434
Open Tender
Civil Works
Works
90 days
CHENNAI
As per tender documents
7 documents required · 7 mandatory
₹1,000
GE CHENNAI
₹1.2 L
Yes
8 May 2023
28 Mar 2023
25 Apr 2023
28 Mar 2023
18 Apr 2023
11 Apr 2023
28 Mar 2023 - 4 Apr 2023
Amount
BOQ UPLOADED ON 28 MAR 2023
SCH A Part I
Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)
Powder coated aluminium frame four Track for sliding windows Series 'D' 25mm with details as under : (i) Jindal steel Section No 20796 - Top (01 No) and side (02 Nos) (ii) Jindal steel Section No 20797 - Bottom (01 No) (iii) Providing and fixing any other fixtures required to complete the frame overall. (iv) Aluminium sections shall be smooth, rust free, straight confirming to IS-733 and IS-1285 respectively. (vi) Powder coating shall not be less than 80 micron. Certificate from the manufacturer will be submitted by the contractor before claiming any payment. Note : (i) The fixing of the Almn frame with suitable size fasteners is inclusive in the rates after fabication of the same. (ii) Anodised aluminium Powder Coated frame for doors, windows, ventilators etc of SLIDING WINDOW SECTIONS SERIES - D (SHUTTER SECTION No 20977- 20 mm including joining cleat for fixing etc. complete all as specified
Powder coated aluminium shutter for four Track sliding windows Series 'D' 25mm with details as under : (i) Jindal steel Section No 20841 - Top and side (01 No each) (ii) Jindal steel Section No 20506 - Bottom (01 No) (iii) Jindal steel Section No 20939 - Locking Side (iv) Providing and fixing all other accessories required for the smooth functioning of the sliding window such as pivots, rollers, locking arrangement with lock, EPDM rubber/neoprene gasket required for fixing Glass / Mesh as per IS1949:1961. (v) Aluminium sections shall be smooth, rust free, straight confirming to IS-733 and IS-1285 respectively. (vi) Powder coating shall not be less than 80 micron. Certificate from the manufacturer will be submitted by the contractor before claiming any payment. Note : (i) The fixing of the shutter is inclusive in the rates after fabication of the same. (ii) Glass / Mesh will be measures and paid for seperately.
Cutting holes into or through brick walls, concrete built, in cement mortaror cement lime mortarand stone walls making good in cement mortar 1:3 or cementconcrete 1:2:4 type B-l as required superficial area not exceeding 150 Sq cm
Providing cement concrete in Type B0 1:2:4 (12.5mm graded aggregate) as in kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe 290, Gde-E-165
Synthetic enamel paint two coats over one coat of red oxide primer on new steel surfaces of any description, over 10cm width or girth not other wise described.
Sheet glass 5.0 mm thick clear float, ordinary quality and glazing with Almn beading in square exc 0.5 Sqm in each pane.
Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture1.40mm and fixed withaluminium wire staples
Taking down cement plaster on brick work or stone walls etc including racking out joints, hacking for key scrubbing down with water etc and removing the debris out side MD land.
Rendering in CM 1:6, on fair faces of brick/concrete suraces15mm thick finished even and smooth without using extra cement.
Rendering 15mm thick on fair faces of brickwork or concrete surfaces in two coats with 5mm thick in CM 1:4 over 10mm thick in CM 1:6, finished even and smooth with out using extra cement.
Ppreparation of old decorated plaster surfaces of walls including brooming down & applying one coat of white wash all as specified and directed.
Preparation of new plaster surfaces of walls including brooming down & applying three coats of white wash all as specified.
Preparation of newly plaster surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting all as specified and directed.
Complete removal of existing treatment on wall surfaces and applying two coats of distemper oil emulsion over a coat of Chalk whiting over plastered surface including necessary preparation to prepare the surface even and smooth complete all as specified and directed.
Complete removal of existing treatment and washing, rubbing down and stopping of surfaces of wall and applying two coat of wheather proof paint (APEX of approved shade) or equivalent over a coat of chalk whiting incl preparation of old decorated plastered surface all as directed by Engr -in Charge.
M/s.Sai Agency
VIJAYALAKSHMI ENTERPRISES
S.T.S.CONSTRUCTIONS AGENCIES
Atish Builders LLP
rc enterprises
MONISH CONSTRUCTIONS
lakshmibuilders
POOJA ENTERPRISES
SRI LAKSHMI ASSOCIATES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .