Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹30.6 LSame as L1Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹34.5 L+₹3.9 L (12.9%)Rejected-Finance | L3 | Rejected-Finance HIGHER |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
1 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar Cantt, PIN 143001
ADDITION/ALTERATION TO BUILDING NO. P-27 AND P-31 AT OLD AMRITSAR CANTT
2022_MES_560589_1
GE/ASR-63/2022-23
Open Tender
Civil Works
Works
150 days
GE Amritsar
Class D Category a i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹70,000
Yes
28 Oct 2024
31 Oct 2022
2 Dec 2022
31 Oct 2022
1 Dec 2022
18 Nov 2022
Amount
Surface Dressing not exceeding 15 Cms deep as in soft/loose soil ; Complete all as specified and as directed by Engineer-in-Charge.
Excavation in trenches not exceeding 1.5 metres wide and not exceeding 1.5 metres in depth and getting out in soft/loose soil etc ; Complete all as specified and as directed by Engineer-in-Charge.
Returnig, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soft/loose soil etc ; Complete all as specified and as directed by Engineer-in-Charge.
Removing exacavated soil to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 metres above the starting point etc ; Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exceeding 50 metres ; Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work ; Complete all as specified and as directed by Engineer-in-Charge.
Taking down Chowkats or frames from the opening of size exceeding 1.5 sqm and not eceeding 4 sqm each with shutters ( without taking off shutters from the frames) ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for Cement concrete type D2, 1:4:8 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete , sub base of floors , surfaces made even & fair ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for RCC (Design Mix) M-25 (using 20 mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for RCC (Design Mix) M-25 (using 20 mm graded crushed stone aggregate) as in column, pillars, piers, post and struts ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for RCC (Design Mix) M-25 (using 20 mm graded crushed stone aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5m span etc ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for RCC (Design Mix) M-25 (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of rough finished surfaces of concrete in foundation and plinth beams; and similar work; vertical or to batter ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & Labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces of concrete ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & Labour for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for TMT Mild steel bars 5mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including 10mm dia in stirrups, spacers and binders ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for brick work with sub class "B" bricks (using old size) straight or curved on plan exc 6 metres mean radius, built in cement mortar (1:6) ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & Labour for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & Labour for applying & finishing walls with Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & Labour for applying & finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of new surfaces ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for rendering 10 mm thick on fair faces of brick or concrete surfaces of Ceiling in cement mortar (1:3) finishing even and smooth without using extra cement ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and labour for preparation of newly plastered surface of Ceiling and applying three coats of white wash on ceiling surface ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and labour for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and labour preparation of new surfaces of Ceiling and applying and finishing with distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work ; Complete all as specified and as directed by the Engineer-In-Charge.
Dismantling brick tiles or terracing tiles single layer in roof ; Complete all as specified and as directed by the Engineer-In-Charge.
Demolition of cement concrete of any description or in any position and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring , surfaces Finished even and smooth without using extra cement ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for cleaning of dust & dirt , Removal of all loose existing bituminous material or with chipper & applying heat torch gun to get smooth plain finished surface. Repair all joints & cracks with Highly Elastic bituminous Cold applied Putty-Tarplast- having penetration after setting upto 8mm & confirming to IS 1580:1991. Any annular space between drain pipe and concrete should be filled with mortar admixed with ShaliSBR latex of STP Ltd. Making necessary Gola 75x75 mm with rich cement mortar admixed with Shali SBR latex of STP Ltd at the interface of horizontal & Vertical junctions ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for Slightly damp the surface, avoid standing Water. Prime the surface with Tarfelt LM mixed with potable water in the ratio 1:1 and apply @ 400gm/sqm (as per surface condition). Allow the primer to touch dry in tacky position in open atmosphere. Thenafter apply 1st coat of Tarfelt LM (Liiquid membrane) having elongation 200% confirming to ASTM-C-412 & bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.5mm confirmin to ASTM-C-412 with no diluation of water on primed surface is still tacky with consumption of 0.7 Kilogram/sqm. lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10-12Hrs. Apply 2nd coat of cured first coat with consumption @ 0.7Kilogram/sqm in opposite dierction of first coat by Brush or roller. Sprinkle sand @ 200Gm P/Sqm while the coating is stick to facilitate plastering for protection screed. Allow it to dry for 10-12 hrs . Apply 3rd coat if required as per site reqirement. Providing & Laying minimum 50mm PCC in slope with welded wire mesh 1.5 mm as reinforcement and PCC admixed with Shallplast LW+ of STP Ltd (Integral Waterproofing compound) @200 ml per bag of cement on horizontal surface for mechanical protection over a separation layer of ShallGeo Textile 120 gsm in client Scope ; Complete all as specified and as directed by the Engineer-In-Charge.
Supply and fixing for factory made uPVC white colour fixed glazed window/ventilator of any size (as required) Fixed type of openable type made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note :- (i) Glass shall be paid separately. (ii) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and Fixing for 10mm thick toughned glass as in hinged door, partiotions automatic doors and similar work including cutting to shape, drilling holes as required ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & Labour for Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & Labour for providing and fixing toughned glass 12mm thick as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes and all necessary items as required ; Complete all as specified and as directed by the Engineer-In-Charge.
Supply and Fixing for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed make-Godrej ; Complete all as specified and as directed by the Engineer-In-Charge.
Supply and Fixing for Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm ; Complete all as specified and as directed by the Engineer-In-Charge.
Supply and Fixing for Brass mortice lock, 4 levers, verticle type, size 100 mm ; Complete all as specified and as directed by the Engineer-In-Charge.
Supply and Fixing for Brass mortice lock, 2 levers, verticle type, size 100 mm ; Complete all as specified and as directed by the Engineer-In-Charge.
Supply and Fixing for 450mm long Brass handles, cast type ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & Labour for providing and making toughned glass (of any thickness) to frosted by using process of controlled thermal and chemical treatments , Acid-etched glass; Complete of design all as as approved by the user & directed by the Engineer-In-Charge.
Material & Labour for providing and making Embossed any type of emblem of size 450mm X 450mm on frosted glass door ; Complete of design as approved by the user & directed by the Engineer-In-Charge.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement ; Complete all as specified and as directed by the Engineer-In-Charge.
Supply and Fixing in reapairs 25mm dia stainless steel powder coated Curtain rods/ rails with Brass brackets, stops, rollers, finials, 1 pair of Brass decorative knobs for each curtain rod etc.
Supply and Fixing for 18mm thick PVC board as in shelves for kitchen cabinets etc ; Complete all as specified and as directed by the Engineer-In-Charge. Make Rajshri/ Sintex
Supply and Fixing for 5mm thick PVC board as in back side of for kitchen cabinets etc ; Complete all as specified and as directed by the Engineer-In-Charge.Make Rajshri/Sintex
Supply and Fixing for 18mm thick PVC shutters one side prelaminated of any shade for cupboard cabinets etc ; Complete all as specified and as directed by the Engineer-In-Charge. Make Rajshri/Sintexx
Supply and Fixing for 40mm long self closing type hydraulic steel hinges ; Complete all as specified and as directed by the Engineer-In-Charge.
Supply and Fixing for 75 to 80 mm long brass handle ; Complete all as specified and as directed by the Engineer-In-Charge.
Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ; Complete all as specified and as directed by Engineer-In-Chrage.
Material and Labour for Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded crushed stone aggregate as in plinth protection etc and lay the floors in panels as directed , surfaces finished even and smooth using extra cement ; Complete all as specified and as directed by Engineer-In-Chrage.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.
Material and Labour for Vitrified ceramic dark shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes ; Complete all as specified and as directed by the Engineer-In-Charge.
Supply and fixing in repairs of One piece ceramic floor/wall mounted EWC with features like twin flush system, noisless soft close seat cover, anty-bacterial surface white with PVC(SWR) 'P' / 'S' trap 110/110mm bore : complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing in repairs PVC Jet spray suitable for EWC : complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing in repairs Chromium plated Health faucet in repair with 1.5 metre long chain ; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail. Make: CERA/JAQUAR
Supply and Fixing in repairs Sheet glass corner shelf assembly consisting of three nos 5.5mm to 8mm thick sheet glass corner shelf with chromium plated bracket guard and railing ; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing for PVC connection 15mm size with PTMT nuts of length 600mm ; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing for Brass chromium plated Wall mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakage free connection with wall tiles & GI pipe ; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing for 15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing for 15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing for brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing in repairs Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed ; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing in repairs PVC waste pipe 32mm dia fixed to WHB/Urinals ; complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs 100mm dia CP grating with or without hole type complete all specified and directed.
Supply and Fixing for Vanity of size 820x450mm with vitreous China wash basin white,with suitable size including CP waste coupling 32mm bore,waste PVC pipe complete all as specified and directed.
Supply and Fixing for CP brass towel rail of 20mm dia and 600mm long ; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing for 125mm CP shower rose fancy type with CP arm ; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing for Vitrous china white (Box type) toilet paper holder fixed to walls with chromium plated (CP) brass screws ; complete all as specified and directed by Engineer-in-Charge. Make: CERA/JAQUAR
Supply and Fixing for 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors , including taking down ; complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing for 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 50mm thick sand cushioning ; complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered on edges including reqd form work ; Complete all as specified and as directed by the Engineer-In-Charge.
Material & labour for Point wiring for one light point / fan point / bell point / 5 Amp socket outlet point (independent point), controlled by two , two way switches with 1.50 Sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) (using colour code as per IS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing specifications) and including sunk Metal flush box , cover plate with suitable size of frame for fixing/mounting fitting like modular switches, sockets, including one continuous run of 1.50 Sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) (using green colour) as in earth wire and connected to common earth dolly, and making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour ; complete all as specified & directed by Engineer-in-Charge. Note :- Cost of modular metal flush boxes with a coat of synthetic enamel paint over a coat of red oxide to steel surface to avoid rust, concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push etc and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate.
All as per item No 80.00 above but for One light point controlled by two 2-way switch complete.
All as per item No 80.00 above but for One 5 Amps outlet point on same board with other switches/sockets complete.
All as per item No 80.00 above but for One 3 pin 5 Amps socket outlet on independent board complete.
Material & labour for Point wiring for one 15 Amp socket outlet point (independent point), with 4 Sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) (using colour code as per IS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing specifications) and including sunk Metal flush box , cover plate with suitable size of frame for fixing/mounting fitting like modular switches, sockets, including one continuous run of 4Sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) (using green colour) as in earth wire and connected to common earth dolly, and making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour ; complete all as specified & directed by Engineer-in-Charge. Note :- Cost of modular metal flush boxes with a coat of synthetic enamel paint over a coat of red oxide to steel surface to avoid rust, concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push etc and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate.
Supply & Fixing for modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for modular switch 2 way 6A, 240 volts, 1 module complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for modular fan step regulator, 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm sweep all as directed
Supply & Fixing for modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed
Supply & Fixing for modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed
Supply & Fixing for ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65 x 50 mm three terminal, 240 volts, AC single phase complete all as specified
Supply & Fixing for Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings including suitable size presto plastic board for resting to holder including LED bulb 10 Watts complete all as specified
Supply & Fixing for sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts ; complete all as specified and directed by the Engineer in Charge.
Material & Labour for distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 6 way, 415 volts grade with insulated rated bus bar assembly with isolated neutral bar,door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TPN/TP/SPN/SP etc, including taking down existing unserviceable one and removing from site ; complete all as specified and directed by the Engineer in Charge. NOTE: Serviceable MCBs will be removed from old unsv DB, refixed in new VTPN DB and shall be measured & paid separately as fixing only under Schedule item No. 17 here-in-after.
Material & Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, TPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, ; complete all as specified and directed by the Engineer in Charge. NOTE: Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.
Supply & Fixing for MCB single pole 5 to 32 Amps, 240 volt, 10 KA, C curve with IP-20 protected terminals including contact indication window for visual indication and safety of operator, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete all as specified and directed
Supply & Fixing for MCB TPN 63 Amps, 240 volt, 10 KA, C curve with IP-20 protected terminals including contact indication window for visual indication and safety of operator, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc ; complete all as specified and directed by the Engineer in Charge.
Fixing only MCB single pole 5 to 32 Amps, 240 volt, 10 KA ; complete all as specified and directed by the Engineer in Charge.
Supply and fixing for MCCB triple pole and neutral (four pole) 100 Amps, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 25 KA including making incoming and outgoing connections ; complete all as specified and directed by the Engineer in Charge.
Supply and fixing sub main wiring with 4 runs of 16 Sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including non metalic PVC conduit, not less than 25mm dia, ISI marked, with conduit fittings and accessories concealed in wall/ceiling/floor including 2 runs run of 16 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Four runs of 16 Sqmm copper cable and two run of 16 Sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
Supply and fixing sub main wiring with 2 runs of 4Sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including non metalic PVC conduit, not less than 25mm dia, ISI marked, with conduit fittings and accessories concealed in wall/ceiling/floor including 1 runs run of 4Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Four runs of 16 Sqmm copper cable and two run of 16 Sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
Taking down carefully existing serviceable Split type AC of any capacity, ceiling cable end, etc., removing the AC for keeping in safe custody and refixing the same as directed by Engr-in-Charge after rewiring with provn of new suitable MS bolts, suitable size copper tube (no brazing will be entertained) grouted to wall and connecting up and making good to the disturbed surface in cement morter 1:3 or cement concrete 1:2:4, Type B-1 as required and testing complete all as directed NOTE: Cost MS bolts, nuts & washers, copper tube as per site requirement etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate
Taking down carefully existing serviceable Geysers of capacity 25 ltrs, ceiling cable end, etc., removing the geyser for keeping in safe custody and refixing geyser with provn of new suitable MS bolts, PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers brass union, NRV, grouted to wall and connecting up including cleaning of element , flanges , tank etc including provn of new 3 core sheathed multi-stranded flexible copper conductor cable, writing MES No. including making good to the disturbed surface and testing complete all as directed
Supply & Fixing for Wall mounted fan of 400mm sweep plastic body and blade including pull cords for speed regulation & wide oscillation control, with 1300 RPM, 60 air delivery, 50 Watt, colour as approved by the user ; complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for ceiling fan 1200mm sweep complete with blades, down rod, electronic regulator , remote and accessories (i.e. PVC canopy, rubber bush, split pin, hanging clamp, holdfasteners etc.) 230 Volts, white colour, with min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) technology and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to ceiling fan and writing MES No. ; complete all as specified and directed by the Engineer in Charge.
Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 300mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan ; complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for storage electric heater (Geyser), flexible mounting of capacity 25 Litres, single phase, 240 volts, AC, white colour, ISI marked BEE 5 star rated complete with high precision & externally adustable capillary thermostat for temp regulation, backup safety overheating capillary therrmal cut out at 95ºC, temperature display, etc., including provn of new suitable holding clamp, MS bolts, grouted to wall and connecting up including 3 core sheathed multi-stranded flexible copper conductor cable connected with 15/16 Amp plug top and provn of water connections with new PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers brass union, NRV of suitable size, check/end nuts with washers, 15mm dia 100mm long nipples (02 Nos) for hot water and cold water connections including writing MES No. and making good to the disturbed surface in cement morter as required and testing complete all as directed NOTE: Cost of flexible copper cable of 3 core, PVC steel braided inlet/outlet pipe of 15mm dia, 450mm long with brass union, NRV, check/end nuts, nipples, MS bolts, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate
Supply & Fixing for LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose ; complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for PLUTO NEO LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size ; complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for COMET ROUND Slim surface mounted round shape 12 watt 220 volts AC, 6000K recessed type LED luminaire, die-cast aluminium body with specular finish aluminium reflector of fixture size 107x78mm and ceiling cut out of 92mm dia with IP-20 protection with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable of suitable size ; complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for Wall mounted, indoor, HELIOS Mirror Light LED with aluminium die cast, suitable for and including 10 watt 6000K, WH LED light, prewired with 3 core flexible copper cable of suitable size from connector to light fittings and connecting up ; complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for Dusk and down roadway luminaries 45 watts, 230 V AC, 6000K outdoor type with epoxy black powder coated sheet, high pressure die-cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting including driver, lamp bracket made of 40mm bore galvanised iron light grade pipe made to shape having overall length not exceeding 1.5 mtr, through mild steel clamp of 25mm width and four Nos. nuts, bolts & washers of 12mm dia, 100mm long fixed to wall with all other fittings ; complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for Neon LED flexible strip lights of red colour, IP 20 non integral, 220Volt, and fixing in wall/panelling/false ceiling drops including testing ; complete all as specified and directed by the Engineer in Charge. Make: Cat No. LSO2835 of Luker or equivalent make of CG/Havells/Bajaj/Philips/Wipro
Supply & Fixing for NEON LED strip connector, 220 volts for IP 20 non integral flexible LED strip light (Colour RGB) ; complete all as specified and directed by the Engineer in Charge. Make: Cat No. LSOC2835 of Luker or equivalent make of CG/Havells/Bajaj/Philips/Wipro
material & Labour for earthing complete with galvanised earth plate electrode 600mm X 600mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 metres below ground level) with top edge of earth plate not less than 1.5metres below normal ground level, connected to GI Wire of size 4mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No.3 of MES SSR 2009, Part – I (Specifications) and connected to main switch board/LT feeder panel including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in alternate layers with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150mm both ways center to center with suitable lifting handle to cover, earth pit made of PCC 1:3:6 type C-1, GI protection pipe light grade 20 mm bore up to 7.5metres length from earth electrode including testing complete all as specified and directed NOTE: (i) Earth lead and protection pipe beyond 7.5 m shall be measured and Paid separately. (ii) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.
Taking down carefully existing unservicable copper/aluminium point wiring (Light ,Fan ,Socket or power ) with complete fittings , fixtures and pendent , regulator , switches , lamp holders , switch sockets etc removing materials and making good disturbed surfaces of walls , floors etc Complete all as specified and as directed by Engineer-in-Charge.
GEE EMM ASSOCIATES
M/s. M Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .