8369 REPAIRS TO ROOF, PLUMBING, JOINERY, FLOORING, PLASTERING, PATH, INTERNAL ELECTRIFICATION AND CONNECTED ITEMS TO CERTAIN BLDG OF OFFRS MD ACCN IN THE AREA UNDER AGE BR II SOUTH PUNE

Amount

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified

M&L for roof tiles, Mangalore pattern Gde 'AA' interlocking at side joints laid dry complete all as specified and directed.

Fixing only for roof tiles Mangalore pattern interlocking at side joints laid dry (except tiles) complete all as specified and directed.

M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

Fixing only ridge or hip tiles to suit Mangalore pattern roofing tiles complete all as specified and directed.

M&L for IInd class HW clean sawn battens exceeding 5 and n. exc 15 sqcm in cross section, spaced at 30cm centres complete all as specified and directed.

Fixing only IInd class HW clean sawn battens at 30cm centres exc 5 and n exc 15 sqcm ( Except batten) complete all as specified and directed.

Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed.

S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed.

S&F in repairs IInd class hard wood 20mm thick boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section complete all as specified

M&L for plain fillets of IInd class hard wood exc 13 but n exc 25 sqcm in section square rectangular or triangular in section secured with screwes complete all as specified and directed.

Preparing surfaces of slate battens, any size and spacing prepared and treated all over (measured overall on one side only, spaces not deducted) with two coats creosote complete all as specified and directed.

Dismantling wall and ceiling boards , any thickness, including cover fillets complete all as specified and directed.

S&F for Gypsum ceiling board for ceiling of approved pattern finish 595x595x9 to 9.5mm thick in size of approved brand/make, laid over and including grid work of size 600x600mm, made out of 0.5mm thick GI tee 32x24mm for main, 25x24mm for cross tee and 20x20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2mm thick GI suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed

S&F in repairs 4mm thick plain AC sheet in ceiling including three coats of white wash complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed.

S&F 0.60 mm thick grade 'O', GI corrugated mild steel sheeting with grade 'B' corrugation, zink coating @ 120 GSM inclusive of both side, laid with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook in roof all as specified.

S&F 0.80mm thick PGI mild steel sheets with zinc coating @ 120 gm/sqm inclusive of both side as in ridge, hips, valley, gutters and straight flashings complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / ridgesl, fixed with self tapping screws complete all as specified and directed.

Dismantling of AC sheet corrugated or semi corrugated in roof covering complete all as specified and directed.

M&L 6mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with 'L' type or 'J' type or cranked hook bolts, washers etc complete all as specified and directed.

Fixing only asbestos cement corrugated or semi corrugated sheets in roof fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and directed.

M&L for asbestos cement two piece adjustable ridge 6mm thick fixed with 'L' or 'J' bolts with washer etc complete all as specified and directed.

M&L for filleting in any position and to any shape in CM 1:3 sectional area exc 25 sqcm but n exc 50 sqcm complete all as specified and directed.

Dismantling of wrought or MS work of any description etc as directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with stainless steel wire staples all as specified.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and frame using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP : 20048 (b) Glazing clips : 19352

S&F in repairs Mortice lock, vertical type size 100mm of brass body, 4 lever 'Link' make complete all as specified and as directed.

S&F aluminium powder coated fancy type curtain rod 20mm bore all as specified and directed by Engr-in-Charge.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fixed with beads as specified and directed by Engr-in-Charge.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F figured glass pin head type, 3mm thick and glazing with oil putty in square not exc 0.50 Sqcm in each pane complete all as specified and directed.

Disconnecting existing tank of capacity not exc 1000 ltr setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting & refixing in position complete all as specified and directed. (Note :- The rates shall deemed to be inclusive of necessary temporary arrangements for un interrupted water supply to users)

S&F of rotational moulded polythene water storage tanks of double layeers (cylindrical vertical with closed top) hoisted and fixed in position including locking arrangement device complete all as specified and directed for the following capacity :-

500 litres

1000 litres

M & L for cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channels, chajja coving and base slab for tank complete all as specified and directed.

Rendering 10mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and directed (Note : WPC shall be measured and paid seperately)

M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor and wall and injecting injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. (Note :- The rate is inclusive of replacement of any defective fittings/fixtures of any type/material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend.) [Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Accepting Officer.]

Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m all as directed by Engr-in-Charge

M&L water proofing treatment to RCC roof slabs, walls, chajjas etc shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc by brooming with broom sweeping free from dust etc and evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane non woven, polyster weighing not less than 3.5 Kg/Sqm with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engineer-in-Charge. Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames of wooden or steel not exc 1.5 sqm (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkats or frames of wooden or steel exc 1.5 sqm and not exc 4 sqm (without taking off shutters from frames) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed

Taking down shutters of any description exc 2 sqm and n exc 4 sqm each complete all as specified and directed

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 125x60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 105x60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction with block board core construction with block board core and plywood face panells commercial type on both faces incl 6mm thick 1st class HW (Teak wood) beading all around on edges complete all as specified and directed.

M&L Preparatioin of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and directed.

S&F rolled mild steel section conforming to grade E-165(Fe-290) framed work as in door or gates of angle or other section with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either and hinges or steel hanging door fittings and hanging, fastening etc complete all as directed by Engr-in-Charge.

M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 18/19 mm thick perlaminated particle board, exterior graded, prelaminated both side with decorative choice lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cabinets/ Pelmets including 3mm thick, 1st class HW (Teak wood) beading all around fixed in repair complete all as specified and directed.

S & F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and as directed.

S & F Continuous (piano) hinges 30 mm width of flap,mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

S & F for 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw as per specified.

S&F 100mm dia cupboard handles fixed with nuts screws and washer of brass polished complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F butt hinges 100mm size stainless steel medium weight all as specified.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts or extruded etc length of bolt 300mm complete all as specified and directed.

S&F aluminium handles, anodised, cast type, of size 150mm complete all as specified and directed.

S & F MS 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repair floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall complete all as specified and directed

S&F Hasp and staples 125mm size mild steel wire type stove enamelled black including bolt to hinges plate complete all as specified and directed.

Demolition of brick/PCC block/stone masonary built in cement mortar complete all as specified and directed.

M & L for Pre-cast cement concrete type C1 (1:3:6) (using 20mm graded aggregate) block masonry with solid blocks, exc. 10cm in width and setting in cement mortar (1:6) complete all as specified & directed by Engr-in-Charge.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone agg as in coping on top of wall, bed blocks and the like inculding weathering , slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete or stone wall surfaces with WPC @ 3 % by weight of cement including taking down plaster,complete all as specified and as directed. (Note :- WPC shall be measured and paid separately)

M&L for rendering 10mm thick in CM 1:6, on brick/ PCC block walling, finished even & smooth without using extra cement, including dubbing out average 10mm thick on irregular face of wall , complete all as specified and directed

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of exterior emulsion all as specified.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

S&F in repairs steel rolling shutters made out of 1.25mm thick laths/sheets without ball bearing as specified including top cover, anchoring rod, hasp & staples & one shop coat of primer and erected in position as indicated, manual type complete all as specified.

Taking down & refixing steel rolling shutters without ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type all as specified and directed.

S&F in repairs safety lever locks mild steel with 4 levers for rolling shutters all as specified and directed

S&F in repairs ball bearing for rolling shutters complete all as specified and directed

Cutting holes in brick walls built in cement mortar for bolts, joist, pipes, air flues, ventilators and cast iron boxes superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM (1:3) or PCC (1:2:4) type B-1 as required.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and n exc 20cm girth

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc including taking up or down carefully steel tubing and connections complete all as specified and directed of the following sizes :-

15mm bore

20mm bore

Refixing of old steel tubing and connections in new or old position (wall/floor/ceiling etc) including taking up or down carefully steel tubing and connections including cleaning for refixing complete all as specified & directed of sizes :-

15mm bore

20mm bore

S&F in repairs Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed of following bore of pipe :-

15mm bore

20mm bore

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified & directed with following dia :-

15mm bore

20mm bore

25mm bore

Dismantling of drain pipes AC /CI/PVC pipes of various dia jointed in CM or adhesive 75 to 110mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/ceiling or laid in trenches of size 110mm dia including all necessary fittings complete all as specified.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/ceiling or laid in trenches of size 75mm dia including all necessary fittings complete all as specified.

S&F in repairs bib cock 15mm bore standard of PTMT screwed down high pressure handle screwed for iron pipe or for unions.

S&F 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes all as specified fixed in repairs.

S & F vitreous china wash hand basin, white flat back of size 550x400mm including 15mm dia CP pillar tap, PVC waste coupling 32mm, chain and plug and PVC waste pipe, PVC connection 45cm long including CI brackets/fixing with fasteners etc complete in repairs all as specified and directed by Engr-in-Charge.

S & F in repairs, vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.

S&F in repairs PVC low level flushing cistern 10 litres capacity make ISI or equivalent including all internal fitting in repairs, pair of brackets, including inlet/ outlet PVC pipe connections etc complete all as specified and directed.

S&F in repairs Wall mixer 3-in-1 including telephone shower for 15mm bore of pipe conforming to CAT No CON-CHR-281KN of "Jaquar" or Equivalent make of CERA / Kohler

S&F in repairs Bib taps CP 15mm bore fancy type conforming to CAT No ARI-CHR-39037 of "Jaquar" or Equivalent make of CERA / Kohler

S&F in repairs CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No ACN-CHR-1111N of "Jaquar" or Equivalent make of CERA / Kohler

S&F in repairs CP toilet paper holder confirming to CAT No ACN-CHR-1151N of "Jaquar" or Equivalent make of CERA / Kohler

S&F in repairs CP Soap dish confirming to CAT No ACN-CHR-1131N of "Jaquar" or Equivalent make of CERA / Kohler

S&F in repairs Corner glass shelves with brackets CAT No ACN-CHR-1173 of "Jaquar" or Equivalent make of MARC

S&F in repairs CP shower rose 125mm dia with arms for 15mm bore of pipe conforming to CAT No OHS-489 of "Jaquar" or Equivalent make of CERA / Kohler

S&F in repairs Two way Bib taps CP 15mm borefancy type conforming to CAT No. ARI-CHR-39041 of "Jaquar" or Equivalent make of CERA / Kohler

S&F in repairs CP towel ring square conforming to CAT No. ARI-CHR-1121 N of "Jaquar" or of or Equivalent make of CERA / Kohler

S&F in repairs CP 15mm bore concealed stop cock with long neck conforming to CAT No. ARI-CHR-39089 of "Jaquar" or of or Equivalent make of CERA / Kohler

S&F in repairs CP health faucet (ABS body) with 1 mtr long PVC type & wall hook conforming to CAT No. ALD-CHR-565GA of "Jaquar" or of or Equivalent make of CERA / Kohler

Dismantling stone slabs/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing, Apron etc complete all as specified and directed.

Demolition of PCC of any description and in any position not other wise specifically provided for.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, 25mm average thickness leveling course as in padding concrete complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base/flooring complete.

M & L for 300x300mmx6 to 7mm thick, non skid ceramic coloured tiles in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed in CM (1:6) etc complete all as specified and directed by Engineer-in-Charge.

M&L for coloured vitrified tiles 600x600x8mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for matt finished coloured ceramic tiles 7 to 8mm thick joint free, 400x400mm size of approved colour, set jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed in CM 1:4 etc complete as in flooring all as specified and directed.

S & F for Granite 18 to 20mm thick, machine cut (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 10mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M & L Machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for precast chequered cement concrete titles, glossy finish of size 305x305x25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for precast inerlocking paver blocks glossy finish with any shape and size conforming to 15658-2006, 60mm thick M-35 grade with grey cement and pigment laid over & including 30mm thick stone dust/grit 50mm thick PCC 1:4:8 cement concrete complete all as specified and as directed

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick laid in alternate bays including finishing the surfaces even and smooth using extra cement as in path , plinth protection complete all as specified and directed.

Easing of wooden doors and windows by means of plaining, adjusting refixing of panels/single leaf/double leaf including necessary screws nails etc complete all as specified and directed. (Note :- One set of window of single/double/triple leaf and one door shutter of sinlge/double leaf shall be measured as one job)

Supply only Chain link MS galvanisd fencing of any size or type complete.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

M&L for Mild Steel Work such as Flat Iron Fillets for securing Wire Mesh, Straps, Ties, etc. and similar Work, fabrication from Steel Sections conforming to Fe-410-0 or Fe-310-0 including all necessary Welding, Bending Cold or Hot, Drilling Holes for Bolts, in any shape or size as indicated, complete all as specified and as directed.

M&L for Mild Steel Screw Bolts (Machine Made) with Hexagonal Head at one End and screwed the other Ends, each screwed End to be fitted with Washers and One Hexagonal Nut, diameter of Shank 5 to 10mm Length of Bolt exc. 100mm but not exc. 150mm, complete all as specified and as directed.

S&F in repair IP-43, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed / surface on wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing Make - Legrand / ABB/L&T (Note - MCCB 100 Amps 4 pole 25 KA as incomer will be measured seprately in relevant item.)

S&F in repair, IP-43 ,MCB DB 4 way, double door, with 100 amp rated busbar 240 V, SPN concealed / surface on wall as directed by Engr in charge including all cutting holes in or through walls, making good to walls, ceiling etc and applying two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and as directed.

S&F in repair, IP-43 ,MCB DB 8 way ,double door, with 100 amp rated busbar 240 V, SPN concealed / surface on wall as directed by Engr in charge including all cutting holes in or through walls, making good to walls, ceiling etc and applying two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing

S&F in repair, IP-43, MCB DB 12 way, double door, with 100 amp rated busbar 240 V, SPN concealed / surface on wall as directed by Engr in charge including all cutting holes in or through walls, making good to walls, ceiling etc and applying two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete with fitting such as switches,ceiling rose, pendent, regulators etc for taking credit and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through / in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one way switch 5 Amps

One fan point/ exhaust fan point controlled by one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by bell switch 5 Amps

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per ser. item No. 134.00 above but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes with earth dolly duly, covered with laminated hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One bell point controlled by bell switch 5 Amps

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per ser. Item No. 136.00 above but using 2.5 sqmm copper conductor for with 2.5 sqmm earth wire for one 6 pin 15 amps socket outlet on independent board complete all as specified and directed.

S & F Modular Switch piano flush type, single pole, one way, and 6 Amp single module complete all as specified.

S & F Modular Switch piano flush type, single pole, one way, and 16 Amp single module complete all as specified.

S & F Modular Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, 2 module piano flush type complete all as specified.

S & F Modular Switch Socket outlet multipurpose having provision for 3 pin, 16 Amp and 3 pin,6 Amp, 2 module piano flush type complete all as specified.

S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F Bell push modular 6 Amps single module complete all as specified.

S&F Bell Push flush type 5 Amps, 240 volts complete all as specified.

Suply and fix Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S&F lamp holder insulated body with back plate PVC/Polycarbonate type with cord grip cap, angular type fixed on wall incl 9 watt LED lamp complete all as specified.and directed.

S & F for Ceiling rose, surface Bakelite suitable ISI marked complete all as specified

S & F for Switch piano flush type, single pole, one way, and 5 Amp complete all as specified.

S&F switch piano flush type, 15 Amps single pole one way fixed and connect as per existring complete all as specified and directed.

S & F Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type complete all as specified.

S&F socket 5/15 Amp multipurpose and with, 15 Amps single pole one way complete all as specified. and directed.

Supply and Fix in repair MCCB 100 Amps, 16 KA, 4 Pole, 415V complete all as specified and as directed.

Supply and fix LED batten neptune silver tube light fitting complete with all fitting and fixing accessories, 4 Feet, 1X20Watt pre-wired with high efficiency electronic driver, glare free, smooth light distribution conforming to CAT Part No. HPL - HLPT51820PCGCW or equivelent in of Wipro / Philips/BAJAJ complete including taking down any type fitting all as specified and as directed by Engr-in-Charge.

Supply & fix LED batten 10 watt CDL PLASTIC tube light fitting complete all as specified and directed including taking down existing holder/FITTING all as directed. (Make :- BAJAJ-830206 or equivelent in WIPRO / Philips)

Supply and Fix in repair LED security light 25 Watts in aluminium housing with glass cover with suitable dia GI pipe bend to shape existing including taking down existing any type security light all as specifed and directed [Make -Crompton cat no - LSTS-25-CDL OR equivalent in / Bajaj / WIPRO]

S&F in repair,Metal plug and socket -2 pin and earth plug and socket with 20Amps MCB SP concealed / surface on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing

M & L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 6.0 sqmm as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3, SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection and 20 mm dia medium grade GI pipe for watering purpose inlcuding funnel, wire mesh, RCC pit with cover complete and connected to earthing test point all as specified or indicated including testing on completion all as specified and as directed.

M & L for earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 6 sqmm GI Wire complete all as specified and directed.

S&F in replacement MCB SP 6-32 Amps,10KA,'C' series complete all as specified and as directed.

S&F in replacement MCB SPN 20-40 Amps, 10KA, 240V, 'C' series complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size with 04 Sqmm nominal cross sectional area,1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable and including ISI marked PVC casing caping including fitting in wall etc and connected to common earth dolly making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note :- One run of PVC casing caping along with 2x4 sqmm wire and one 4 sqmm earth shall be measured as one unit length)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size with 06 Sqmm nominal cross sectional area, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable and including ISI marked PVC casing caping including fitting in wall etc and connected to common earth dolly making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note :- One run of PVC casing caping along with 2x6 sq mm wire and one 6 sq mm earth shall be measured as one unit length.)

Taking down ceiling fans / exhaust fan from building and servicing completely as reqd with connected accessories and refixing back complete all as specified and as directed.

Supply and fix in replacement anchor bolt & nut 8 mm dia of the geyser fixed on wall in a suitable way and making good the distrubed area all as specified and directed

Taking down geysers 25/50 Ltrs carrying to workshop for leakage repairing , servicing, cleaning etc, and refixing geyser incl PVC cable, sheathed, three core with stranded copper conductor of size 2.5 sqmm complete all as specified and as directed.

Supply and fixing in repairs PVC fresh air fan 250mm sweep complete all as specified and as directed.

REKHA ELECTRICALS

M/S BRJ & SONS

M/s Asrani and sons

Shri Sant Cosntruction