Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹31.8 L+₹5.0 L (18.7%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹50.0 L
EMD Value
₹99,800
Closing Date
18 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862 C/o 56 APO
Comprehensive repairs to bldgs under AOR of AGE B/R Dett-B under GE 862 EWS
2023_MES_633071_1
GER-76/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
As per tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹99,800
Yes
9 Feb 2024
16 Dec 2023
20 Jan 2024
16 Dec 2023
18 Jan 2024
30 Dec 2023
Amount
Dismantling of asbestos cement (corrugated, semi corrugated etc) sheeting in roof covering, complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/ cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
S&F for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' or 'J' type hooks or cranked hooks bolts and washers in roofs, walls etc with grade of zinc coating 275 gm/sqm, complete all as specified and directed.
S&F for 0.80mm thick Plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of Zinc coating 275 gm/sqm, complete all as specified and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed.
Dismantling structural steel work including doors, gates, grills grating and framed truss etc, complete all as specified and directed.
M&L for rolled section as in main and cross beam / columns, hip and jack, rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates (Fe-290 Gde E-165 Quality A), complete all as specified and directed.
S&F of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161(1979) grade St.-240, complete all as specified and directed.
M&L for 75mm plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base for tiling, complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm / 450x350x7mm thick, (highlighter basis) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3, after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for vitrified tiles light shade (premium quality) 9-10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and directed.
M&L for dark shade /double shade / double charged / ultra-charged or printed vitrified tiles (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and directed.
M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in cooking platforms, in steps, pillars, window cills, etc, laid over 15mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc after dismantling of old unserviceable granite stone slab of any size, complete all as specified and directed.
M&L for digital vitrified exterior parking tile 600 x 600mm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to matched, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and directed.
S & F for power coated of any colour (Thickness or powder coating not less than 50 micron) aluminium anodized three track sliding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle lock, etc including 65 x 39.5x 1.5 mm section for complete frame and rubber beading and glazing clips etc. including taking down existing old window of any description, complete as specified and directed by Engr-in-Charge.
S&F in repair for aluminium anodized grills 6.3mm dia decorative type 75mm mesh size, complete all as specified and directed.
M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick as in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:4 of any size after dismantling old unserviceable kota stone, complete all as specified and directed.
M&L for Machine cut kota stone slab(mirror polished) 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including rendering of 10 mm thick in cement mortar 1:3, after dismantling old unserviceable kota stone in skirting, complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
Description all as per Srl item No. 23 above but except bricks NOTE: Old brick retrieved from demolition shall be used.
M&L for brick work using old size bricks sub class 'B', straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4, complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in sub base, foundation, filling and mass, concrete, complete all as specified and directed.
Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on other than faces of brick or concrete work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surface of soffits of slabs, chajja etc, finished the surface even and smooth without using extra cement, complete all as specifed and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resitant primer, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening, complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion over one coat of chalk whitening, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.
Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each and removing, complete all as specified and directed.
S&F for 1.25mm pressed steel door frame of size 125x60 mm with one or more rebates incl necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-1 using 20mm graded crushed stone agregate complete all as specified and directed.
S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (any number of panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and shown on drwaing in SSR Part-II (2020) directed.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & shown in drawing mentioned in SSR Part-II 2020, complete all as specified and directed.
M&L for box type steel windows/ ventilators factory made with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as per IS-1038, complete all as specified and directed.
M&L for box type steel windows/ ventilators factory made with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as per IS-1038, complete all as specified and directed.
S&F for anodised aluminium, powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
S&F for powder coated anodised aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, 1 Nos floor door stopper, anodised aluminium snap beading, screws etc, complete all as specified and directed.
S&F for powder coated anodised aluminium window and ventilator shutters, (minimum thickness of power coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no), complete all as specified and directed
S&F for sheet glass 5.5 mm thick, ordinary quality and fixed with aluminum & rubber beading in square exc 0.5 sqm in each pane, complete all as specified and directed.
M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
M&L in repair for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde E-165, complete all as specified and directed.
S& F for galvinsed mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.
S& F in repair for galvinsed mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n . exc 0.50 sqm in each pane, complete after hacking out old broken glass all as specified and directed.
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in apex stone, coping, benching, hold fasts, water troughs, bed block, surface channel and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work ,complete all as specified and directed.
S&F for 100mm long butt hinges medium weight cold rolled mild steel (ISI Marked) , complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.
S&F for extruded aluminium alloy handles size 125 mm fabricated type anodised (ISI marked), complete all as specified and directed.
S&F for 300 mm long mild steel sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate (ISI Marked) , complete all as specified and directed.
S&F in repair for door closer hydraulically regulated, aluminium (extruded section body) (ISI marked) designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg., Complete all as specified and directed.
S&F 140mm long floor door stopper of aluminium alloy anodised body and tongue with hard drawn steel spring, complete all as specified.
M&L for 300mm MS ordinary rat tail rod pattern door springs (ISI marked) of approved make including roller and roller plate, complete all as specified and directed.
S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, (ISI marked), complete all as specified and directed.
S&F for 100 mm size mortice lock of brass, vertical type, 4 levers,(ISI Marked) complete all as specified and directed.
S&F in repair for 100 mm size mortice lock of brass, vertical type, 4 levers, (ISI Marked) complete all as specified and directed.
S&F in repair for 100mm long butt hinges medium weight cold rolled mild steel (ISI Marked) , complete all as specified and directed.
S&F in repair for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.
S&F in repair for extruded aluminium alloy handles size 125 mm fabricated type anodised (ISI marked), complete all as specified and directed.
S&F in repair for 300 mm long mild steel sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate (ISI Marked) , complete all as specified and directed.
S&F in repair 140mm long floor door stopper of aluminium alloy anodised body and tongue with hard drawn steel spring, complete all as specified.
M&L in repair for 300mm MS ordinary rat tail rod pattern door springs (ISI marked) of approved make including roller and roller plate, complete all as specified and directed.
S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/wooden frame as per specification and drawing complete after dismantling of old unserviceble PVC lining, including fillets complete all as specified and directed.
S&F for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC/wooden frame as per specification and drawing complete after dismantling of old unserviceble PVC lining inculding fillets, complete all as specified and directed.
S&F for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to walls to make PVC frame as per specifications and drawing, complete all as specified and directed.
S&F in repair for sink without drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 495mm x 420mmmm, bowl size 410mm x 330mmx 160mm complete all as specified and directed.
S&F in repair for chromium plated brass shower rose of size 125 mm with swivel joints fixing to steel pipes etc, Complete all as specified and directed.
S&F in repair for chromium plated jet spray suitable for padestal pattern WCs including decorative choice flexible pipe fixed to iron pipe with and inclduing cover plate, complete all as specified and directed.
S&F in repair for 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair for plastic water closet seat cover black/white colour close pattern with flat bottom and cover and mild steel chromium plated aluminum hinging device for pedestal pattern WC, complete all as specified and directed.
S&F in repair for PVC waste pipe 900mm long suitable for wash hand basins and urinals including connecting, complete all as specified and directed.
M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors including taking down old GI tubing 15 mm bore and connections, complete all as specifed and directed.
M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors including taking down old GI tubing 20 mm bore and connections, complete all as specifed and directed.
S&F in repair for 15mm bore bib tap cast copper alloy fancy type, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.
S&F in repair for 15mm bore angle valve cast copper alloy fancy type chromium plated screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F in repair 32mm dia waste coupling, brass, chromium plated for galzed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed. complete all as specified and directed.
S&F in repair for brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete as in repair all as specifed and directed.
S&F in repair for 125 mm dia PTMT grating doom with waste hole for waste pipe (minium weight 40 grm), complete all as specified and directed.
S&F repair for PVC connection 15 mm x 450 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed.
S&F in repair for 450mm long chromium plated brass connection pipe with CP brass nuts on both ends for fixing to pipe or other fittings, complete all as specified and directed.
S&F in repair for 15 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
S&F in repair for 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
S&F in repair for 25 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 680x470 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe, complete all as specified and directed.
S&F in repair for viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe, complete all as specified and directed.
S&F as in repair for viterous China water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover and gaset, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements, complete all as specified and as directed.
S&F in repair for PVC valveless, syphonic action type, low level flushing cistern 10 ltrs capacity white with inlet ball valve, float valve and handle including providing & fixing MS angle iron brackets, PVC flush pipe, complete all as specified and as directed.
S&F in repair for vitreous China wash basin, white, flat back, size 550x 400mm excluding taps, waste chain and plug and porcelan stopper but including brackets, complete all as specified and directed.
S&F in repair for sink without drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410mm x 330mmx 160mm complete all as specified and directed.
S&F in repair for CP soap dish holder, complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15mm bore brass chromium plated wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
S&F in repair for 15mm bore brass chromium plated sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
S&F in repair for counter wash basin oval size 600x425x195mm complete all as specified and directed by Engr-in-Charge.
S&F in repair for counter top wash basin oval size 545x545x180 mm, complete all as specified and directed by Engr-in-Charge.
S&F in repair for centre hole basin mixer with popup waste with 450 mm with all connecting accessories , complete all as specified and directed by Engr-in-Charge.
S&F in repair for glass corner shelf with tempered galss, stainless steel brackets and polished chromi finish rail , complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15mm bore brass chromium plated wall mixer fixed with connecting to over head shower arrangement , complete all as specified and directed.
S&F in repair for Glass Shelf 600mm long, complete as specified and directed by Engr-in-Charge.
S&F in repair for CP towel ring. complete all as specified and directed by Engr-in-Charge.
S&F in repair for CP hand shower (Health Faucet) with 1.20 meter long stainless steel tube & wall hock, complete as specified and directed by Engr-in-Charge.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenchs or in floor of dia of bore 110 mm type 'B' complete after dismantling of old unserviceble PVC pipe all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge.
S&F in repair 100mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement and connecting to waste pipe, complete all as specifed and directed.
M&L for preparation of new wooden surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.
S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board etc, complete all as specified and directed.
S&F for 12mm thick gypsum board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour. All joints shall be sealed and complete ceiling will be finished with wall care putty and two coats of smooth surface oil bound distemper of approved and shade all as per insturctions including dismantling of existing board etc, complete all as specified and directed.
Demolition of reinforced cement concrete in ground floor and paving n exc 15 cm thickness below or above the ground level ,complete all as specified and directed.
M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L formwork to soffits of suspended slabs such as roof slabs, landings and similar work; n exc 200mm thick (Horizontal and sloping) for rough finished surface of concrete, complete all as specified and directed.
M&L for providing reinforced cement concrete type B-1, 1:2:4 (Nominal Mix) (20mm graded crushed stone aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs, chajjas and in shelves and the like, complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level, complete all as specified and directed.
M&L for 40mm plain cement concrete, type B-0, 1:2:4, (using 12.5 mm graded crushed stone aggregates) as in floors, finishing cement concrete surface even and smooth using extra cement, complete all as specified and directed.
M&L for 75mm thick plain cement concrete, type C-1, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.
M&L for preparation of old wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying one coat of distemper oil emulsion, complete all as specified and directed.
All as per srl item No 125 above but on ceiling, complete all specified and directed.
M&L for complete removal of existing treatment of wall surface and applying two coats of distemper oil emulsion over & including of 1.5 mm thick wall care putty, complete all as speicied and directed.
All as per srl item No 127 above but on ceiling, complete all specified and directed.
M&L for complete removal of existing treatment on wall /roof surface including cornices and chajjas etc and applying two coats of exterior weather proof paint in two or more colours pattern over and including a coat of primer, complete all as specified and directed by Engineer -in - Charge.
M&L for Preparation of old surface of wall and applying two coats of exterior weather proof paint in two or more colours over and including a coat of primer,complete all as specified and directed by Engineer -in - Charge.
M&L for providing and injecting chemical emulsion for post constructional cntitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc., complete all as specified and directed.
M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.
M/S RAHUL GUPTA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .