REPAIR TO CHAJJA, FACIA RAIN WATER PIPE, TANK CLEANING, EXTERNAL PLASTER ETC IN CERTAIN MD ACCN AT GURBAX VIHAR COLONY AND NEARBY AREA UNDER AGE B/R-II AT GE GWALIOR.

M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern and colour including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified and directed (Payment for providing grooves shall be made separately).

M & L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specified and directed.

Supply only liquid water proofing compound @ 200 ml per 50 kg of cement.

M&L for providing and fixing welded MS wire mesh weight not less than @ 1Kg/Sqm and applying anti- corrosion primer single component, cementitious inhibiting primer in two layers on observed surfaces of wall, chajja, fascia, facade or any other members building where required etc to create thickness not less than 1mm using Protezione Ferro Mono of and applying 25mm thick one component, thixotropic fiber reinforced polymer modified dual shrinkage compensated, cementitious patch repair mortar Renotroc SP & O comlast WL Extra in W/P ratio 0.16 mixed with liquid water proofing admixture confirming to IS:2645-2003 to be applied on the surface before plastering and as per recommendation of manufacturer complete all as specified and directed.

M&L for applying bonding agent for bonding old to new concrete surface likes chajja/ beam/ceiling/facia etc by high performance modified Styene- Butadiene Rubber (SSR) base binder. Applying of binder is as 10 Sqm/ per lits etc complete all as specified & directed.

M&L for applying 25 mm thick (average) repair mortar ready to use single component polymer modified repair mortar for repair of RCC members likes beams, columns, chajja and facia/ ceiling complete, mortar having good compressive strength and shrikage resistance etc complete all as specified & directed.

M&L for Applying Dr fixit fastflex two component acrylic cementitious coating system over the the concrete/brick/stone masonry surfaces and opening area surrounding pipe outlet/junction/joint area surfaces in kitchen/bath/toilet inside and outside wall as directed by Engr-in-Charge. Apllication procedure : (i) surface of application must be pre-wetted thoroughly with water & brought to a touch dry state. (ii) 1st coat application with a stiff nylon brush. Work well into the substrate, to ensure that all small undulations are completely filled with the coating. (iii) Provide and lay 45 GSM glass fibre mesh over the angle fillet when the first coat in still wet. (iv) 2nd coat to be applied in a direction perpendicular to the 1st coat after 6 to 8 hrs after completion of first coat, complete all as specified & directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete, colour of paint as approved by Engr-in-charge, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling surfaces and applying two coats of cement base paint over a coat of primer complete, colour of paint as approved by Engr-in-charge, complete all as specified and directed.

M&L for complete removal of existing treatment of surfaces of walls of plastered or unplastered surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, staging, slightly rounded or chamfered on edges, angles, kerbs and throating in roof as directed complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-20 ( using 20 mm graded stone aggregate ) as in chajja/fascia like etc. complete all as specified and directed.

Use and waste for formwork to chullah hoods, chajjas, troughs and similar items including edges of concrete rough finished surfaces of concrete complete all as specified and directed

M&L for mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars, 6 mm to 8 mm dia over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position including all fittings, heads, shoes, bend, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. Note : All around mouth area of pipes in roof/joints to be applied with bitumen felt to make leak proof water seal rain water discharge, bitumen felt shall be measured and paid seperately and rain water pipe should be fitted while concrete in green and no drilling or breaking of concrete in roof not allowed to avoid puncturing of roof treatement and make leak proof.

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified. Note : All around mouth area of pipes in roof to be applied with bitumen felt to make leak proof water seal rain water discharge, bitumen felt/joints shall be measured and paid seperately and rain water pipe should be fitted while concrete in green and no drilling or breaking of concrete in roof not allowed to avoid puncturing of roof treatement and make leak proof.

M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 in surfaces where directed, complete all as specified & directed.

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F for 110mm dia PVC (SWR) bends any radious complete all as specified and directed.

S&F for 75mm dia PVC (SWR) bends any radious complete all as specified and directed.

S&F for 110mm dia PVC (SWR) pipes junction single (single T/Y) equal or unequal any radious with access door complete all as specified and directed.

S&F for SWR bends 75mm provided with access door complete all as specified and directed

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair for PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement, complete all as specified and directed.

S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, for 100 mm dia pipe complete all as directed.

S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, for 75 mm dia pipe complete all as directed.

Demolition of brick work or stone masonry including all quoins,arches,pillars etc built in CM complete all as specified & directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed.

Disconnecting existing water tanks (capacity exc 250 & n exc 500 ltrs), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc measured separately) and writing Date of Cleaning & Next cleaning due date complete all as specified and as directed.

Disconnecting existing water tanks (capacity exc 500 & n exc 1000 ltrs), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc measured separately) and writing Date of Cleaning & Next cleaning due date complete all as specified and as directed.

Cleaning and removing all scale and dirt etc. from tanks (capacity of tank exc 250 ltrs but n.exc 500 ltrs) and from mouths of circulating pipes etc using approved drinking water tank cleaning powder complete all as specified and as directed.

Cleaning and removing all scale and dirt etc. from tanks (capacity exc 500 & n exc 1000 ltrs) and from mouths of circulating pipes etc using approved drinking water tank cleaning powder complete all as specified and as directed.

Dismantling of water tanks exc 250 ltr and n.exc 500 ltr capacity and removing from site complete all as specified and as directed.

Dismantling of water tanks exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and as directed.

S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position, and writing Date of Cleaning & Next cleaning due date complete all as specified and as directed.

S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position, and writing Date of Cleaning & Next cleaning due date complete all as specified and as directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and directed.

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and directed.

S&F in repair CPVC Tank adoptor 25mm fixed to tank with pipe/union/nipple etc complete all as specified and directed.

S&F for in repair gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed.

S & F Sintex water tank cover (Dhakkan) tied with wire for 500 or 1000 Ltr capacity water storage tank complete all as specified and directed

Taking up or down 20 mm dia steel tubing /PPR/CPVC or any kind of pipe connections etc, including cleaning for Refixing or removal to store complete all as specified and directed.

Taking up or down 25/ 32 mm dia steel tubing /PPR/CPVC or any kind of pipe connections etc, including cleaning for Refixing or removal to store complete all as specified and directed.

Supply and laying 20mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and directed.

Supply and laying 25mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and directed.

M&L precast cement concrete tiles of size 250mmx250mmx20mm, machine pressed as in roof/floor top , comfirming to IS -1237-1980 laid over 15mm thick screed bed in CM 1:4 and set, jointed and pointed in Epoxy resin in roof floors and cut and polished, with white cement and pigment with cement mortar (1:2) by mixing of chemical or equivalent complete all as specifeid and as directed. Note : Tiles joints to be filled with epoxy resin used for tile joint filling, properly to avoid seepage in roof.

M&L for Providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or water tank staging, coping or any other likely works complete all as specified and directed.

Applying the non shrink high mechanical strength properties epoxy based mortar @ 5kg/RM forming 'gola' on all corner joints of wall, chajja, facade, roof parapet etc or any other similar places to prevent the capillary formation from wall to roof area; by three component system comprising of base, hardener and quartz filler having ER Base and Hardener with Quartz filler etc including preparation of surfaces by removing plaster, concrete padding etc complete all as specified & directed

Hacking out aid broken glass of any thickness and any description from wooden/steel frame/stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F in repair 4mm thick figured glass pin head type and glazing with oil putty, silicon or S wooden beads, in square n exc 0.5 sqm in each pane complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 GDE -165, complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F 12mm thick Toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes as required and fixed on steel pivot all as approved sample with engravings/ designs/ symbols to the pattern and style including necessary stainless steel fixing patches and lock patches fixed complete as approved and directed.

S&F in repair of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F of 600mm long Stainless steel AISI 316 Door handles fixed to toughned glass door complete all as specified and directed,

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. Note: Demolished material through out of MoD Land rate included above item.

Demolition of concrete (un-reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. Note: Demolished material through out of MoD Land rate included above item.

Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing), removing the rubbish off the premises of MOD land complete all as specified & directed. Note: Demolished material through out of MoD Land rate included above item.

M&L for applying two coats of two component flexible acrylic polymers modified cement based waterproof coating in sunken floors and wall joints having good compressive strength and shrikage resistance etc all as per manufacturer instructions in product brouchure complete all as specified & directed.

M&L for 20 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface and mixed with WPC finished even and smooth without using extra cement complete all as specified & directed.

M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggreagte) complete all as specified & directed.

M&L for PCC 1:5:10 type E2 (using 40mm graded brick aggregate) as in filling of sunken floors complete all as specified and directed.

S&F in repairs of 100mm dia of outlet PVC (SWR) floor trap plain with mild steel CP grating (100mm including jointing with solvent cement, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces of size 300mm x 200mm x 7 mm thick set and jointed over and incl 10mm backing coat in CM 1:3 and pointed in colour cement to match complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangle) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over and incl 15mm screed bed in CM 1:4 in floors complete all as specified and directed.

S&F for as in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.

S&F in repairs for vitreous china squatting pan, orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps and connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed.

S&F in repairs flush pipe fixed to pedestal pan, incl all joints, of polythylene of low or high denisity or PVC 32 mm dia for low level cistern complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle and flushing pipe complete all as specified and directed.

S&F for in repairs for 15mm, bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

Please Enable Macros to View BoQ information