Restoration of rain damage LWSS Deola in GP Deola, Mohal, Khondu, Tehsil Sunni Distt Shimla

Amount

Description

Dismantling wood work in frames,trusses,purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area 40 square centimetres and above.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below

Demolishing stone rubble masonry manually/ by mechanical means including stacking of steel bars and disposal of uerviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement plaster

Providing wood work in frames of doors, windows, clearstory, windows and other frames wrought, framed and fixed in position: Sal wood

Providing and Fixing panelled glazed or panelled and glazed shutters for doors windows & clearestory windows i/c black enamelled iron butt hinges with necessary screws: 40 mm thick Sal wood.

Providing and Fixing Wire gauge shutters using galvanized M.S Wire gauge of I.S Gauge designation 85 G with wire of dia 0.56 m.m for door windows and clearstory windows i/c black enamelled iron butt hinges with necessary screws: 40 m.m thick Sal wood.

P.F. M.S. Grills of required pattern in wooden frames of windows etc. With M.S. Flats,Square or round bars with round headed bolts and nuts or by the screws (Plain Grill)

15 mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to floor to level i/c arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in c:m 1:6 (1 cement : 6 sand).

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign sand papering and knotting. Ready mixed paint brushing with white wood primer pink.

Painting two coats ( Excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing to give an even shade including cleaning oil, grease, dirt, dust and other foreign matter sand papering and stopping:- Ready mixed paint other than white.

Providing 40X3 Flat iron hold fast 40cm long i/c fixing to frame with 10m.m dia bolts nut and wooden pugs and embedded in cement conc. Block 30x10x15 (1 cement: 3 sand:6 graded stone aggregate 20mm nominal size).

P/F anodized aluminium sliding door bolts and nuts screws etc. Complete.

P/F anodized aluminium tower bolt anodized transparent or dued to required shade and colour with screws etc.

P/F anodized aluminium handles anodized transparent or dyed to required shad and colour with screws etc. Complete.

P/F Oxidized M.S. Hooks and eyes.

Providing and laying cement concrete 1:2:4 work (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- Plinth & Foundation

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels.

R/R stone masonry/ Polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6 (1Cement : 6 Sand).

Distempering (Two coat) with oil bound washable distemper of aproved brand and manufacture and of required shade on undecorated wall surface to give an dshade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushinf free from mortar dropping and forign matter and also including preparing the surface even and sand arpered smooth.

Providing form work with steel plate 3.15 m.m thick welded with angle iron 30x30x5 m.m so as to givea fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:-

Flat surfaces such as soffits of suspended floors, roofs landings and the like

Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like.

Prov. Mild steel/ tor steel reinforcement for RCC work including bending, binding and placing in position i /c binding wire complete up to floor two level

Dismantling roofing including ridges hips,valleys,gutters etc. Stacking the serviciable material and disposal of un-serviciable materials within 20 metres lead G.I. Sheet roofing.

Steel work built up tubular (round,squareor rectangular holow tubes etc.) trusses etc. including cutting hoisting, fixing in positionand applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete.

Providing and fixing of laminated sheets roofing with J or L hooks bolts and nuts 8 mm dia G.I. Limpet and bitumen washers complete.

Lokesh Kumar (BID ID -518730)

Kamlesh Kumar (BID ID -518757)

Vinay Kumar (BID ID -518267)

Rakesh Kumar (BID ID -517922)