R/23/CT-tender/26-27

I-Code 15.23 / 15.23.1 , vol 2 Dismantling tile work in floor and roof laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 m m to 25 mm.

I-Code – 15.56, page 243, Vol-2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Code no – 13.51 / 13.51.2, page 221, vol -2 Painting with silicon and acrylic emulsion based water thinnable sealer Of approved brand and manufacture on wet or patchy portion of plastered Surfaces: Two coats

Code – 13.5 / 13.5.1, page 217 , vol-2 Cement Plaster ( in coarse sand) 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 Cement : 4 coarse sand)

Code no – 11.37 / Page 179, vol 1 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.Size of tiles 500x 500 mm

Code no 8.31, page 132, vol 1, 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete ( size 300x 500)

Page 1010, code - 13.80 , vol 2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Code no – 13.88, page 224 , vol- 2 removing white or colour wash by scrapping and sand papering end preparing the surface smooth including necessary repairs to scratches ETC complete.

Code 13.85, page 1014, vol 2 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/ Litre qty same as SL no 07 ---

Page 1012, Code 13.83, vol 2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, Including applying additional coats wherever required to achieve even shade and colour. 13.83.2 Two coats---- qty same as SL no 07 ---