WELCOME MAINTENANCE AND PERIODICAL SERVICES AND REPAIRS TO WALL CEILING PLASTER AND FLOORING TILING SANITARY FITTINGS PLUMBING PVC TANKS SUNKEN TREATMENT AND CERTAIN BR WORKS AT DGQA COMPLEX UNDER GE SOUTH SECUNDERABAD

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick renderering in CM 1:4 complete all as specified & directed.

M & L for 18 to 20 mm thick Granite (of any type)tiles machine cut in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thik rendering in CM 1:4 complete all as specified & directed.

M & L for 18 to 20mm thick Granite (of any type)tiles machine cut bedded and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thik screed bed in CM 1:6 complete all as specified & directed.

Rounding to edges of stones slabs one edges,such as in steps, cooking platforms and similar situations all as specified and directed.

M & L for cutting and polishing on existing marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed by Engineer in charge.

M & L for Acid washing of existing wall / floor tiles all as specified and as directed by Engr in Charge.

M&L for removing the Vegitation/ plant on roof/ wall in any position put the chemical to burn the roots of plant and repair with CM (1:3) and making good complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 lit n exc 500 lit and from mouths of circulating pipes, etccomplete all as specified and as directed

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 lit n exc 1000 lit and from mouths of circulating pipes, etccomplete all as specified and as directed

S&F rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified & directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks complete all as specified & directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for new tanks screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified & directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore in repairs complete all as specified & directed.

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified & directed

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified & directed

Demolition of cement concrete in ground floor and paving exc 15 cm thickness below and above ground level

M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of primer at the rate of 0.30 Kg/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay water proofing treatment with App modifed felt having with glass fiber non woven reinforcement 150 Grm/ sqm and weighing 3.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bounding over a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt as in sunken floor (bottom and vertical) complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately .)

M&L for PCC 1:4:8 type D-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed. .

S&F High density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

S&F in repar 15 mm bore stop valves, fancy type , cast copper alloy chromium plated with long shank and cup (Concealed type) , screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repairs stop cock 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) complete all as specified & directed.

S&F in repairs Angle stop valve of 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) complete all as specified & directed.

S & F Angle cock fancy type brass chromium plated screwed one ends for iron pipe or for unions and fixed 15mm dia pipes, complete all as specified and as directed.

S&F in repair 15mm bore CP Bib taps, castcopper alloy withcrutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified & directed

S&F in repairs Bib taps 15mm standard of PTMT and any colour screwed for iron pipe complete all as specified & directed

S&F in repair 15mm bore pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified & directed.

S&F 125 mm size fixed in repairs brass chromium plated shower roses /shower arms with or without swivel joints including fixing to steel pipe or union of 15 mm dia

S&F PVC ( SWR) floor trap,75mm outlet dia plain with grating including joining with solvent cement all as specified and directed

M&L for salt glazed stoneware gully traps of size 150mm x 150 mm , square or round mouthed , type 'P' including setting and jointing to drains with cement mortar 1:1 complete all as specified

S&F for PVC (SWR) gully trap of I25/110 mm dia set and jointing wilh solvent cement complete all as specified and directed.

S&Fin repair WHB vitreous china (flat back or angle back type ) ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection pipe and 15 mm CP piller tap complete.

S&Fin repair WHB vitreous china with pedestal ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection pipe and CP piller tap complete.

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete.

S&F in repairs wash down water closet (pedestal pattern) white with plastic water closet seat cover closed pattern incl P or S trap with flat bottom and mild steel chromium plated or aluminised hinging device and flush pipe of low density PVC 32mm dia for low level flushing cistern complete

S & F in repair wash down water closet incl flush (pedestal pattern) of size 65.5x 38.5 x 76.5 cm white EDGE (S-220) * complete incl all fitting & fixtures complete all as per cat No Cat no : 92562 S-220 of make Hindware or equivalent make as given at list of makes in PS

S & F Urinal Complete set incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : 96008) or equivalent make as given at list of makes in PS

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm

S&F in repairs, CP health faucet with 01 mtr tube and hook complete all as specified and directed. Make :- Cat No ALD-579 of Jaquar or equivalent make of Prayag/MARC as approved

S&F two way bib cock 15 mm dia chromium plated complete fancy type of branded as specified and directed.'

S & F brass CP mixer for mixing Hot and Colder water scerewed down for iron pipe and fixed for 15mm bore fixed in repairs all as specified.

S & F Tubular Towel rail 20mm dia D type 60 cm long fixed between flanges in repairs with brass cromium plated incl all fitting & fixtures complete all as specified

S & F vitreous china Soap Holder (Brass) fixed to walls with brass chromium plated screws incl all fitting & fixtures fixed in repairs complete all as specified

S & F Toilet Paper Holder vitreous china box type with cover fixed to walls with brass chromium plated screws in repairs incl all fitting & fixtures complete all as specified

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm(Make: Prayag cat no : 555) all as directed by Engr-in-charge.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of white wash on walls complete all as specified and directed.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of white wash on ceiling surfaces.complete all as specified and directed.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of oil bound distemper on walls. complete all as specified and directed. Note : OBD should be applied by roller brush only.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of oil bound distemper on ceilings. complete all as specified and directed. Note : OBD should be applied by roller brush only.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of colour wash on walls. complete all as specified and directed.

M&L Preparation of plastered or unplastered old decorated surfaces of walls and applying one coat of cement base paint height upto 7.50 m including necessary formwork complete all as specified and as directed.Note : cement base paint should be applied by roller brush only.

M&L Removal of existing treatment on walls and applying necessary Altek superfine putty over one coat of altek primer to obtain smooth regular/even finish using sand paper and applying two coats of OBD of any tint complete all as specified and as directed. Note : OBD should be applied by roller brush only.

M&L for complete removal of existing treatment including preparing surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX ULTIMA of Asian Paints or equivalent of Berger/Nerolac) over a coat of primer including 1mm thick wall care putty height upto 7.50 m including necessary formwork complete c all as specified and directed. Note : Mentioned paint should be applied by roller brush only.

Removal of existing treatment on walls and applying One coat of Royal Play Primer and Royal play Finish Over a coat of Birla White Putty complete all as specified and as directed by Engineer-in-Charge.

M&L One coat of synthetic enamel paint on old wooden surfaces of any description, not other wise described, over 10 cm width or grith including preparation of surfaces. complete all as specified and directed.

M&L One coat of synthetic enamel paint on old steel & iron surface of any description, not other wise described, over 10 cm width or grith including preparation of surfaces. complete all as specified and directed.

M&L Two coat of sythetic enamel paint on old wooden surfaces of any description, not other wise described, over 10 cm width or grith including preparation of surfaces. complete all as specified and directed.

M&L For writing building Number on wall over 30 cm dia block paint base , and writing letters or figures ( Block, Roman, or Indian ) 10 cm high complete all as specified and directed.

Demolition of Brick or stone masonry built in cement mortar all as specified and directed by Engineer in charge.

M/L brick work with Flyash bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified.

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick/concrete finished even and smooth without using extra cement

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debries complete all as specified and directed.

M/L rendering 15mm thick in CM 1:4 on fair faces of brick or concrete with 3% of Water Proofing Compound and finishing the surfaces even and smooth without using extra cement in patch work at various places upto height 7.50m incl necessary formwork complete all as specified & directed. (Note : WPC Shall be measured and paid seperately)

Supply only integral water proofing compound.

M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing even and fair. complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar 1:3 as in ceiling concrete surfaces including finishing even and fair. complete all as specified and directed.

M & L for applying three coats of white wash on wall including preparation of newly plastered surfaces complete all as specified and as directed.

M & L for applying two coats of oil bound distemper on walls over a coat of primer including preparing newly plastered wall surfaces complete all as specified and as directed.

M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

M & L for two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces of walls complete all as specified and as directed.

M & L for two coats of Dr Fixit Rain coat including preparation of new plastered surfaces of walls complete all as specified and as directed.

S&F in repairs stainless steel Kitchen plate rack of grade 304, weight not less than 3 kg and size 34"x35"x9" all as specified and directed by Engineer in charge.

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed by Engineer in charge.

M&L in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases inetc completle all as specified and as directed.

S&F 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 30mm flaps Continuous (piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified and as directed

S & F 100 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed

R G NAIDU CIVIL CONTRACTOR AND BUILDERS

M/S DIVIJA BUILDERS

BEEGEE DESIGN SYSTEMS

abhilasha constructions

Vara Enterprises

BALAJI ENTERPRISES

PARDEEP AND CO

NEWS CONSTRUCTIONS