PROVISION OF MECHANICAL LAUNDRY, REFRIGERATOR AND COOLING APPLIANCES AND 200 KVA GENERATOR WITH ASSOCIATED WORK AT MIL STATION JAISALMER UNDER GE (A) JAISALMER

Amount

Supply, installation, testing and commissioning of industrial washer extractor , high spin, soft mount side/front loading of 30 kg capacity,electrically operated AC,3 phase,415 volts, with inner/outer cabinet made of stainless steel , computer controlled complete with electrical operation panel, foundation of machine and all accessaries with safety feature as per manufacturer design & specifications as folowing as below complete all as specified and directed by Engr-in-charge. Make :-IFB/Stefab/Fabcare (a) Capacity dry weight per charge 1:10 = 30 kg. (b) Volume 318 Ltrs. (c ) Drive motor of 3.75 kw. (d) Cylinder speeds for wash 40 to 50 RPM and final extract 780 to 840 RPM. (e ) Loading door opening 500 mm dia. (f) Water connection 25 mm dia and water consumption 300 Ltrs/ cycle. (g) Electrical load for heating 12-18 kw.

Supply and installation and commisioning of wet linen trolly of 30 Kg capacity formed out of stainless steel tubes and bars, electro treated, fitted with 4 Nos swivelling type ball bearing wheels complete all as specified and directed Make :-IFB/Stefab/Fabcare

Supply and installation and commisioning of dry linen trolly of 30 Kg capacity formed out of stainless steel tubes and bars, electro treated, foldable front fitted with 4 Nos swivelling type ball bearing wheels complete all as specified and directed Make :-IFB/Stefab/Fabcare

Supply and fixing sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and as directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of tripple pole and neutral rated capacity TP 63 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 63 Amps rating industrial wall mounted plug and socket 3P+N+E suitable for IP67 degree of protection complete all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of tripple pole and neutral rated capacity TPN 63 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed.

M & L for submain wiring with approved colour code/as per IS (Red,black & green for three phase) circuit with four single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 10.00 Sqmm (FRLS) in suitable concealed conduit size including two run of PVC insulated multistranded copper conductor nominal cross sectinal area of 10.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engr-In-Charge.(Note :- Four runs of 10.00 Sqmm cable & one run of 10.00 Sqmm cable shall be paid as one unit length)

M&L for Cutting the existing 80mm pipe DI/GI and reducing to required length in position for insertion of new tees 80x80x50mm

Supply and laying in trenches steel water tubing galvanised medium grade with all fittings and accessories for successfull functioning of pipe line of size 25 mm dia

Supply and laying in trenches steel water tubing galvanised medium grade with all fittings and accessories for successfull functioning of pipe line of size 50 mm dia

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or soft/dis integrated rock for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out complete all as specified & directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers of soil not exceeding 25cm.

Returning, filling in, including spreading, leveling watering and well ramming in layers of soft/ disintegrated rock not exceeding 25cm.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point of soil.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point of soft/ disintegrated rock

M&L for sand cushiong to under ground cable using tibba sand and gently punning to cushioining to cable complete all as directed by EIC.

Supplying & Laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone patti cable cover 25 to 30 cm wide and n exc. 60 cm long each laid dry abutting with each other complete all as specified by EIC.

S&F gun metal valve , globe or gate valves with iron wheel head, screwed both ends for size 25 mm dia pipe.

S&F gun metal valve , globe or gate valves with iron wheel head, screwed both ends for size 50 mm dia pipe.

Supply, laying and testing cable XLPE Insulated screened PVC bedded,galvanised steel strip or wire armoured,electric power cables(heavy duty) with stranded aluminium conductor,1100 volts grade of size 4 core 16 sq mm

S & F cable protection pipe 'light grade' galvanised of size 40 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground level connected to galvanized iron strip 25x4 mm as earthing lead up to 7.5 mtr by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection connected to electrical equipment and earthing test point , earth dolly and earth chamber as shown in elect plate No 2 of SSR Pt-I including all necessary earth work, excavation, earth chamber with PCC 1:3:6, Type C1 and RCC chamber cover of PCC 1:2:4 with handle and 20 mm dia GI watering pipe with funnel and wire mesh etc and testing on complete all as specified and directed by Engg-in-Charge.

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground level connected to 4.00 mm dia GI wire as earthing lead up to 7.5 mtr by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection connected to electrical equipment and earthing test point , earth dolly and earth chamber as shown in elect plate No 2 of SSR Pt-I including all necessary earth work, excavation, earth chamber with PCC 1:3:6, Type C1 and RCC chamber cover of PCC 1:2:4 with handle and 20 mm dia GI watering pipe with funnel and wire mesh etc and testing on complete all as specified and directed Engg-in-Charge.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to DBs or any other indicated situation for loop earthing with 4.00 mm dia GI wire size complete all as specified and directed Engg-in-Charge.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to DBs or any other indicated situation for loop earthing with galavanised iron strip of 25X4 mm size complete all as specified and directed Engg-in-Charge.

Supply and installation, commissioning of glass top Deep Freezer single phase 240 vol, 50 Hz of capacity 320 litre capacity having double door with any star rating all as specified and directed by Engr-in-charge. Make: Voltas/Bluestar/Haier

Supply and Installation refrigerator, electric driven (single phase), capacity upto to 195 Litres. BEE 5 star rated all as specified and directed by Engr-in-charge.Make: Voltas/Bluestar/Haier

Supply and Installation refrigerator, electric driven (single phase), capacity 320 Litres or above available in market 3 star or above all as specified and directed by Engr-in-charge. Make: Voltas/Bluestar/Haier

Supply and Installation refrigerator, electric driven (single phase), capacity 420 Litres or above available in market 3 star or above all as specified and directed by Engr-in-charge. Make: Voltas/Bluestar/Haier

Supply and installing and commisssioning diesel Engine driven generating set 415 volts, 3 phase 4 wire, 1500 RPM, 50 Hz, power factor 0.8 as per BS 5514/IS-10002 complete with control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather proof and long lasting finish as per OEM manufacturing of capacity continious and canopy cover considering all as rating factors and comprising of the following:- (A) ALTERNATOR :- Self regulating with brushless self excitation, 415 volt, 3 phase, 4 wire, 50 Hz, 0.8 PF, 1500 RPM, with voltage from no load to full load, foot mounted, screen protected, revolving field, self exited alternator conforming to IS/IEC 60034-1 drip proof with class 'H' insulation, steel ball/roller bearings at both ends of the alternator shaft, with necessary controls as recommennded by the manufacturers and capable of supplying unbalanced load, with rating 200 KVA at PF at NTP conditions. (B) ENGINE : 6 Cylinder, in line 4 stroke radiator cooled engine, dry type, replaceable paper element air cleaner with restriction indicator air to aftercooler, opimised turbocharger for increased altitude capabilities ,HPCR fuel system with A1 class electronic governing, duel fuel filter system pre filter including water separator and Water In Fuel (WIF) sensor and main filter, integral set-mounted radiator system suitable 50°C ambient temperature, electrical starter motor with soft start engagement all as per BS-5514/IS-1002,1500 RPM control gauges, RPM/hours meters etc and capable of giving and output of 200 KVA at 0.8 PF for coupled alternator under NPT conditions complete. with following :-

(i) Flexible-coupling set directly mounted to engine and alternator with coupling guard. (ii) 12 v DC electric starting system with 12 v, 150 Ah battery charging alternator etc with built in regulator. (iii) Industrial type silencer including MS exhaust pipe. (iv) Vibration damper. (v) Engine overspeed stop/trip switch.

(vi) Radiator with fan. (vii) Dynamo for battery charging. (viii) corrosion inhabitor coolant. (ix) Engine control panel including ammeter, battery charging indicator battery voltage indicator, lub oil indicator. (x) fuel tank shall be in built in base frame of suitable capacity made up of 14/16 SWG sheet duly painted and fitted with inlet and outlet, air vent, drain valve, level indicator. The fuel tank shall be of suitable capacity for 8 hours of continuous operation all as OEM specification. (C)SKID :- The engine and alternator shall rest on skid mounting type base frame fabricated from suitable MS frame suitably machined to ensure perfect alignment and the engine and alternator with rigid construction and necessary reinforcement to ensure minimum vibration all as per OEM recommendation.

(D) CONTROL PANEL : Auto mains failure panel 415 V, 3 phase, 50 Hz made up of angle iron frame of size 50x50x6mm and 2 mm hick MS sheet vermin proof, dust proof, powder coated, consisting of following :- (i) Copper bus bar with suitable capacity with incoming/outgoing terminals. (ii) MCCB of suitable rating with over load and short circuit protections. (iii) Microprocessor based suitable relay with suitable nos of incoming outgoing terminals for operating contractors. (iv) Suitable electronic timers for efficient operation of AMF penal.annuciator shall be provided for indication of failure state of panel indication for hrs shall come in the panel. 12 and 24 Volt DC operation (v) Over speed protection, Over voltage protection, Over current protection. (vi) Low oil pressure protection, coolant temperature Battery voltage, (E) SILENCER Hospital grade silencer suitablly optimized to meet stringent noise emmission standards laid down by MoEF/CPCB. (F) ACOUSTIC ENCLOSURE To meet stringent MoEF/CPCB norms of 75 dBA @ 1 mtr a 75% load under free field conditions. The acoustic enclosure is to be made of by CRCA sheets. High quality nose absorband and fire-retardant grade acoustic insulation material (PU Foam) complying to IS 8183.

Note: Installation and anything exta required technically for efficient functioning of AMF Panel shalll be deemed to be included in the quoted rate. Documents three sets of following documents :- Maintenance and operation manual for engine and alternator, spare parts catalogue, warranty/test certificate, schematic diagrams of controll panels. Note :- Contractor will satisfactorily conduct load test of each DG Sets for 12 hrs continous run including run on 10% overload for 1 hour. Testing eqpt will be arranged by the contractor. Fuel/Oil required for test shall be supplied by the Contractor and one year servicing (DLP) is reponsibility of the contractor.

Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core complete all as specified and directed by Engineer - in- charge.

Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 150 sq mm 3.5 core complete all as specified and directed by Engineer - in- charge.

Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed by Engineer - in- charge.

Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core complete all as specified and directed by Engineer - in- charge.

S&F tubes,'light grade' galvanised with all fitting and fixed complete of size 80 mm dia to walls and ceilings or laid in floors complete all as specified and directed by Engineer - in- charge.

S&F tubes,'light grade' galvanised with all fitting and fixed complete of size 25 mm dia to walls and ceilings or laid in floors complete all as specified and directed by Engineer - in- charge.

M&L bore earthing not less than 250mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground level connected to galvanized iron strip 32 x 6 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanised iron or steel including brazing work and 40 mm dia light grade pipe for earth lead protection including all necessary earth work, excavation, earth chamber with PCC 1:3:6, ype C1 and RCC chamber cover of PCC 1:2:4 with handle and 20 mm dia GI watering pipe with funnel and wire mesh etc and testing on complete all as specified and directed by Engr-in-charge.

Supply and install LT panel out door type dust and vermine proof both side openable door made out of 3.15 mm thick CRCA sheet base/side frame of angle iron 50x50x6mm,height 60 cm from floor/plate form complete with aluminium bus bar having current cap 400 amps duly covered with sleeve of pvc taps considering colour code having 3 phase 4 wire system 415 volt,50HZ supply incl connection. Connection to all incoming/out going cable providing cable entry gland , and over all powder coated with gray paint complete with the following item.:- (i) Changeover switch of cap 400 Amp 4 Pole - 01 Nos

Supply and install LT panel out door type dust and vermine proof both side openable door made out of 3.15 mm thick CRCA sheet base/side frame of angle iron 50x50x6mm,height 60 cm from floor/plate form complete with aluminium bus bar having current cap 400 amps duly covered with sleeve of pvc taps considering colour code having 3 phase 4 wire system 415 volt,50HZ supply incl connection. Connection to all incoming/out going cable providing cable entry gland , and over all powder coated with gray paint complete:- (i) Change over switch of cap 250 amps 4 pole

Supply and fixing feeder pillar box out door type not less than 0.60 M X 0.60 M X 0.60M made out of 3.15 mm thick CRCA sheet powder coated dust & vermin proof supported on angle iron frame 40x40x5 MM , aluminium bus bar 03 Nos rated capacity 300 Amps for phase and 01 No rated capacity 200 Amps for neutral supported on porcelain insulator including painting with two coats of synthetic enamel paint first quality over a coat of red oxide primer and PCC foundation including taking down old feeder pillar box complete all as specified & directed by Engineer -in-charge.

M&L for PCC platform for resting DG Set shall be in squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6 as a side of platform filled up with PCC (1:2:4) type B0 (12.5 mm graded aggregate) for a height of 300mm and 100 mm filling in Moorum/red bajri and 300mm depth of soling for a dimention all as shown in drawing enclosed and all as per as per IS specification or recommended OEM. The cost of platform incl all details necessary to construct platform for DG Set deemed to inclusive of follwing. (i) Excavation in any type of soil, (ii) Returning filling in any type of soil, (iii) Removal of soil, (iv) Stone masonry including Key pointing (1:3) CM, (v) Rendering including two coat of cement base paint over a coat of primer on wall (vi) Rubber sheet of @10mm thickness to be provided below DG enclosure frame area to absorb DG vibrations transfer to foundation etc and as directed by engineer-in-charge.

S.G.ENGINEERING COMPANY