SPL REPAIR TO BLDG NO. P-82 OR MD ACCN OF 2 4 GR, PROVN OF RAIN WATER HARVESTING AND ARBORICULTRE IN KLP OTM ACCN FOR DIV PRO

Amount

Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC on wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note:- Water Proofing Compound shall be measured and paid seperetely.

M&L for 10 mm thick cement plaster in cement mortar (1:3) as on ceiling, finished even & smooth without using extra cement complete all as specified and directed.

S&F in repair for 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.

Dismantling of existing water tanks and removing to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) triple layered, hoisted and fixed in positions all as specified in SSR Part-I, with and including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections of 20 mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections of 25 mm bore complete all as specified and as directed.

S&F 15mm bore steel tubing and connection medium grade tubing in new or old position to walls, ceiling, floors etc including all fitting as socket, elbow, nipple, union etc complete all as specified and as directed.

S&F 20mm bore steel tubing and connection medium grade tubing in new or old position to walls, ceiling, floors etc including all fitting as socket, elbow, nipple, union etc complete all as specified and as directed.

S&F 25mm bore steel tubing and connection medium grade tubing in new or old position to walls, ceiling, floors etc including all fitting as socket, elbow, nipple, union etc complete all as specified and as directed.

S&F in repair 15mm dia angle stop valves cast copper alloy, fancy type, chromium plated complete all as specified and as directed.

S&F in repair 20mm bore stop valves cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 25mm bore stop valves cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S & F in repair, 15mm bore bib taps fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S & F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down chowkhats or frame area n.exc 1.50 Sqm each with shutter (without taking of shutter from the frame) complete including removing from site complete all as specified and directed.

Taking down chowkhats or frame area exc 1.50 Sqm each with shutter (without taking off shutter from frame) complete including removing from site complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any description area exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregates as in coping, bed plate etc with necessary use and waste of formwork complete all as specified and directed.

M&L for 2ndclass hard wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and directed.

M&L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass. Gauze etc and all as specified in SSR and fitted to chowkhats complete all as specified and directed.

S&F mild steel works as in small articles like hold fasts, conforming to Fe-290 or Fe E-165 all as specified & directed.

S&F powder coated three track aluminium window shutter sliding type with frame of powder coated aluminium channel section suitable for sliding aluminium shutters weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium shop beading screws with two shutter including 5mm thick coloured glass and one shutter with stainless steel wire gauge including necessary locking arrangement and handle etc., complete all as specified and as directed.

S&F powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc. including glass, complete all as specified and as directed

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 complete all as specified and directed.

S&F solid PVC door frame of size (50mm x 47 mm) made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening complete all as specified and shown on drawing.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 fixed with aluminium wire staple etc., complete all as specified and directed.

S&F in repairs for galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm complete all as specified and directed.

S&F 3mm.thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm.thick figured glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F Hasp and staple safety type aluminium anodized hinges pin including bolt to hinges plate 125 mm long complete all as specified and directed.

S&F butt hinges 100mm long medium weight cold rolled MS and fixed complete all as specified and directed.

S&F extruded aluminium alloy butt hinges 100mm size type B-21 complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and directed.

S&F aluminum handles cast type anodize 150 mm long complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 250 mm long complete all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 250mm long complete all as specified and directed.

S&F aluminium alloy handle, cast type, anodised, 100 mm size complete all as specified and directed.

S&F 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and direcetd

S&F for curtain rails, anodised aluminium alloy with and including fixing fancy type brackets, stops, rollers etc complete all as specified and directed.

M&L for applying two coats of synthetic enamelled paint over one coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed.

M&L for preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of zinc chromate primer all as specified and directed

S&F prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed in repair to timber frame work complete all as specified and directed.

Dismantling of boarding any description, fixed in any position with screws complete all as specified and directed.

S&F 30mm continuous piano hinges mild steel bright finish or elec-trogalvanised complete all as specified and directed.

S&F in repairs for shower rose cast copper alloy chromium plated with or without swivel joints 125 mm dia complete all as specified and directed.

S&F in repairs pillar tap of 15mm dia bore pipe, fancy type, cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back size (550 x 400) mm including waste, chain & plug and poreclain stopper and bracket etc. complete including cutting for and pinning in ends of brackets or erecting angle iron bracket and 32mm dia waste fitting brass chromium plated for WHB etc; with long screwed shanks and fly nuts, flange end bedded in red lead cement including 32mm dia pipe type waste pipe fitted complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces on wall after necessary preparation of the surface, complete all as specified and directed.

M & L for applying three coats of white wash on newly plastered surfaces of ceilings after necessary preparation of the surface, complete all as specified and directed.

M&L for preparation of old decorated surface of walls by brooming down and wire brushing etc and applying one coat of white wash on wall complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash to ceiling complete all as specified and directed.

M&L for preparing newly platered surfaces and applying two coats of distember oil emulsion white or tinted on walls complete over one coat of primer with and including one coat of 3mm thick cement base wall care putty on walls complete all as specified and directed

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer with and including one coat of 3mm thick cement base wall care putty on walls complete all as specified and directed.

M&L for preparing the new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparing the old surfaces by complete removel of existing treatment and applying two coats of cement based paint over a coat of primer on walls complete all as specified and directed.

M&L for roof treatment in repair by complete removal of existing old treatment and treated with following specifications :- (a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction. (e) Applying two coat of aluminium paint @200 gm/Sqm over bituminous surface of membrane. Note : Supply only WPC shall be measured and paid separately under relevant item.

M&L for roof treatment in repair by complete removal of existing old treatment and treated with following specifications :- (a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying modified APP polymeric membrane 3 mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction. Note : Supply only WPC shall be measured and paid separately under relevant item.

M&L for cement concrete tiles of size 25 cm x 25 cm x 22 mm thick with grey cement and no pigment, machine pressed, set, jointed and pointed in neat cement slurry colour to match as in floors etc. with and including over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

S&F cast copper alloy chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Dismantling floor, hearth or wall liling including cement mortar beding layer complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface of size (300x200)mm x 5 to 6mm thick with and including over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm as in floor etc, with and including over 15 mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L for granite of any type tiles 20mm thick in steps, jambs, pillars, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, etc including removing from site complete all as specified and as directed.

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

M&L for 40mm dia of low density polyethylene (LDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc., complete all as specified and direced.

S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm bore of any radius complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal 110mm bore provided with access door complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal 75mm bore provided with access door complete all as specified & directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified & directed.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement complete all as specified & directed.

S&F 110mm dia PVC (SWR) WC connector with lip ring complete all as specified & directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in sunken floor average thickness 50mm and making adequate slop towards spout pipe etc complete all as specified & directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces and finishing the surfaces fair and even without using extra cement in CM (1:4) with WPC complete all as specified & directed. Note:- WPC shall be measured and paid separately.

M&L for PCC (1:5:10) type E2 using 40mm graded brick aggregate as in sunken portion complete all as specified & directed.

S&F 32 mm dia GI spout light grade for sunken portion complete all as specified & directed.

M&L for bitumen blown 85/25 applied hot two coats to concrete surfaces at rate of 1.2 Kg/sqm per coat complete all as specified & directed.

M&L for polythene film black 200 micron laid in floors etc complete all as specified & directed.

S&F vitreous china squatting pan ORRISA Pattern of size (580x 440)mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints complete all as specified & directed.

M&L for 75 mm thick PCC (1:4:8) Type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified & directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection etc finished cement concrete surface even and smooth without using extra cement complete all as specified & directed.

M&L for repair and rendering 10mm thick in CM (1:3) on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of visible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) including necessary scafolding work for double/single storey bldgs complete all as specified & directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.

Supplying and planting following types of trees plant n less than 1.2 mtr with and including refilling with mixture of approved soil and manure of cowdung and watering the plants till it regains its strength remains alive in soil and taking care upto 1 year growth of planted trees including watering etc complete all as specified and as directed:- (a) Ashoka Plant

(b) Guava Plant

(c) Mango Plant

(d) Lichi Plant

(e) Neem Plant

Supply only flexible pipe 20mm bore ISI marked for watering to tree complete all as specified and as directed.

Provn of composite rain water harvesting system 6000 Ltrs capacity with and including following:- (a) Respective Capacity - 01 Piece (b) First Flush System - 01 set (c) Gravity Filter - 01 piece (d) Delievery pipes 25mm bore - 15 Rm (e) Down take pipe - 15 Mtr

S&F PVC underground tank of capacity 6000 Ltr with and including excavation, earthwork and necessary fixing arrangements complete all as specified and as directed.

S&F UPVC pipes (SCH-40) of 100mm dia with all fittings laid in floor complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

Removing excavated materials to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for providing reinforced cement concrete nominal mix (1:1.5:3) type A1 (using 20mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for providing reinforced cement concrete nominal mix (1:1.5:3) type A1 (using 20mm graded stone aggregates) as in wall basement and like complete all as specified and as directed.

S&F TMT Mild steel bas 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hokking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip quality complete all as specified and directed.

Use and waste form work to face of retaining wall of rough finished surface complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface of size (350x250)mm/ (450x 350)mm x 7mm thick with and including over15 mm thick cement plaster in CM (1:6); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L for boulder pitching grouted with cement mortar (1:6) complete all as specified and as directed.

Taking down carefully coppper /aluminium point wiring (light, fan, socket and power) complete including all switch, sockets, ceiling roses, switch boards, regulator etc and disposal under schedule of credit and making good disturbed surfaces complete all as specified and as directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects) complete all as specified and as directed.

Taking down of main switch /DB's of any type and any capacity etc. for reuse at site or carrying to the store (To be measured only when found serviceable) complete all as specified and as directed.

Taking down of MCB's of any size any type etc. for reuse at site or carrying to the store (To be measured only when found serviceable) complete all as specified and as directed.

Taking down sub main wiring/service connection of any type any size and disposal under schedule of credit and making good disturbed surfaces complete all as specified and as directed.

Taking down and re-fixing the existing ceiling fan any type and any size after servicing, greasing and painting complete in the same location complete all as specified and as directed.

M&L for point wiring complete with 1.5 sqmm single core multistranded copper conductor 1100 V grade PVC insulated and unsheathed FRLS copper cable drawn through and including PVC casing /capping fixed on surface to wall/ ceiling by means of MS screw, PVC saddles etc including 3.0 mm thick hylam sheet top cover with MS sunken boxes concealed to wall for mounting of switch, socket, regulator etc includuing 1.5 sqmm single core solid copper conductor PVC insulated and unsheathed as earth continuity conductor connected to earth dolly all as specified for lthe following :-(a) One light point controlled by one, one way switch

(b) Description all as per Srl item No. 122 but for one fan/exhaust fan point complete all as specified and as directed.

(c) Description all as per Srl item No. 122 but for Socket 5 Amp on same board complete all as specified and as directed.

(d) Description all as per Srl item No. 122 but for socket 5 Amp on Indp Board complete all as specified and as directed.

Description all as per Srl item No. 122 but for here in before but 2.5 Sqmm cable for power point complete all as specified and as directed.

S&F isolator TPN four way 80 amps 415 Volt complete all as specified and as directed.

S&F isolator SPN 40 amps 230 Volts complete all as specified and as directed.

S&F MCB SPN 32 amps 230 Volts complete all as specified and as directed.

S&F MCB SP 20 amps230 Volts complete all as specified and as directed.

S&F MCB SP 5 to 32A, 240V complete all as specified and as directed.

M & L for re-fixing serviceable MCB SPN - 20 amps 230 Volts retrieved under item No 119 here-in-before and making connection complete all as specified and as directed.

M & L for re-fixing serviceable MCB SP 5 to 32 amp 230 Volts retrieved under item No 119 here-in-before and making connection complete all as specified and as directed.

S&F fan regulator electronic stepped type 80 watt complete all as specified and as directed.

S&F ceiling roses three terminals complete all as specified and as directed.

S&F switch piano type, SP, one way, flush type 5 Amps complete all as specified and as directed.

S&F socket out let 3 pin 5 Amp flush type complete all as specified and as directed.

S&F Socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified and as directed.

S&F switch pino flush type 15 Amp 240 volt complete all as specified and as directed.

Supply and fixing LED light fitting 1x 20 watt (4ft) complete with energy saving, environmental friendly, long life corrosion resistant, surface mounting IP65 LUMINAIRE WITH PC housing & oral finish cover standard fitting like polyster ballast, lamp holder, startar holder etc, wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified including flexible copper cable 1 Sqmm 3 core 2 to 3 meter long and connected complete all as directed. Make:- Cat No. HSN Code 9405 of Make Havells or equivalent as per list of makes.

M & L for lamp holder PVC/Poly carbonate type with black plate suitable for angle holder complete all as specified and as directed.

M & L for re-fixing serviceable fan regulator electronic type 80 watt retrieved under item No 118 and making connection complete all as specified and as directed.

M & L for re-fixing serviceable ceiling roses three terminals retrieved under item No 118 and making connection complete all as specified and as directed.

M & L for re-fixing serviceable switch piano type, SP, one way, flush type 5 Amps retrieved under item No 118 and making connection complete all as specified and as directed.

M & L for re-fixing serviceable Socket out let 3 pin 5 Amp flush type retrieved under item No 118 and making connection complete all as specified and as directed.

M & L for re-fixing serviceable Socket out let 2 in 1 flush type 3 pin 5 & 15 Amp retrieved under item No 118 and making connection complete all as specified and as directed.

M & L for re-fixing serviceable switch pino flush type 15 Amp 240 volt retrieved under item No 118 and making connection complete all as specified and as directed.

M & L for re-fixing serviceable FTL light fitting 1 x 40 watt box type complete retrieved under item No 118 and making connection complete all as specified and as directed.

M&L for sub main wiring of 4 Sqmm 2 single core copper conductor multistranded PVC insulated and unsheatahed cable drawn through and including MS conduit fixed on surface to wall/ceiling by means of MS screws and saddles and PVC insulated and unsheathed solid copper conductor 4.00 sqmm as earth continuity conductor duly connected to earth dolly/main switch complete all as specified and as directed.

M&L for sub main wiring of 6 Sqmm 2 single core copper conductor multistranded PVC insulated and unsheatahed cable drawn through and including MS conduit fixed on surface to wall/ceiling by means of MS screws and saddles and PVC insulated and unsheathed solid copper conductor 6.00 sqmm as earth continuity conductor duly connected to earth dolly/main switch complete all as specified and as directed.

Raju Electrical and Refrigeration Works

M/S.R.S.Chauhan and Sons

Vp sanjiv

M/s Mukesh and company

Associated Engineers

M/s R R MUKHERJEE & CO