SCAVENGE BLOWER TO TM/

Special Eligibility Criteria

1. 1

   1. A] BLW reserves the right to procure entire or bulk quantity (minimum 80% of net procurable quantity) from CLW/BLW approved sources for either "Motor" or "Blower" for Traction Motor or "both".Approved sources of "Motor" for traction motor are eligible for bulk quantity but in that case respective "Blower" is to be procured from CLW/BLW approved sources. Similarly approved sources of "Blower" for Traction Motor are also eligible for bulk quantity but in that case respective "Motor" is to be procured from CLW/BLW approved sources. Tenderers to mention the make of both "motor" as well as "Blower". B] Approved firms whose prototype for the tendered item has not yet been cleared will be considered for bulk orders subject to type test/consistency test. As per Part-A of eligibility criteria, it is clear that approved sources of Motor for traction motor Blower (Item ID 2100011) and Blower for Traction Motor (Item ID 2100012) shall be considered for bulk order subject to fulfilment of other para of this part. Implied meaning of "approved firms" mentioned in part-B shall be same as that of Part- A. This part of eligibility criteria is to be examined with UVAM VD and there are no any approved firm against which this remark is mention. Therefore there are no any question of stucking of bulk quantity. 2.Where there are not more than three Indian suppliers categorized as Approved Vendors for the tendered item, Suppliers categorized as Developmental Vendors can be considered for placement of bulk order without any quantity restrictions in terms of para 2.12 along with sub Para of BLW Tender Document Rev. Year-2026, Ver.01. ( Click here to download Format)

   Document optionalConfirmation required
2. 2

   (a)Offers of developmental vendors appearing in U-VAM for the Motor for traction motor Blower (Item ID 2100011) and Blower for Traction Motor (Item ID 2100012)) or both (without any condition for prototype/field trial clearance) can be considered for developmental order up to 20% of NPQ. (b) Developmental vendors appearing in U-VAM (with condition for prototype/field trial clearance) as well as vendors whose name do not appear in U-VAM for the tendered item may be considered for small quantity developmental order (up to 5 Percent of Net Procurable Quantity]. Offer of vendors whose name do not appear in U-VAM for the tendered item will be considered for developmental order only if, along with offer, they enclose required past credential of supply of same item / similar to tendered item, details of Plant & Machinery, Testing Facility, QAP, ISO Certificate and other relevant document to substantiate their capacity to develop and supply the tendered item subject to successful capacity-cum capability assessment and completion of formalities as per the bid condition. Offers of firms on whom developmental order with capacity- cum- capability assessment and/or prototype inspection of CLW/Other PU/Other Zonal Railway is pending i.e. Final prototype inspection certificate has not been issued till tender opening date, will not be considered for repeat developmental order.

   Document requiredConfirmation required
3. 3

   In keeping with the Public Procurement (Preference to Make in India) Order, 2017, as amended, it has been found that there exists sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to "Class-I Local Suppliers" only. Therefore, only class-I local supplier shall be eligible to bid and supply, irrespective of the purchase value. It has been further informed that the minimum local content for the local supplier, of the tendered item to be categorized has class-I local supplier shall be 50%. The vendors who do not qualify to be class-I local suppliers should not quote in the tender as their offer shall not be considered for any ordering. In case any vendor who does not qualify to be a class-I local supplier for the tendered item participates in the tender if does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.

   Document requiredConfirmation required

Check List

1. 1

   Please ensure that you have furnished the statement of deviations, if any.
2. 2

   Please ensure that you have submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers.
3. 3

   Please ensure that you have furnished the details of equipment/quality control.
4. 4

   Please ensure that you have quoted price on the basis of free delivery to destination, indicating the break up.
5. 5

   Please ensure that you have read the schedule of requirement and confirm the conditions therein and in case of any deviation the same has been mentioned in deviation statement.
6. 6

   Please ensure that you have mentioned name of brand.
7. 7

   Please ensure that you have mentioned MAKE/OEM.
8. 8

   Please ensure that you have quoted as per the tendered Specifications / Drawings.
9. 9

   Please ensure that you have submitted context specific document at designated place of e-offer.
10. 10

    Please ensure that you have attached relevant MSE certificate if you claim for preferential treatment as MSE.
11. 11

    Please ensure that you have submitted requisite Earnest money.

Commercial-Compliance

1. 1

   Please indicate [Y/N] whether you are interested in availing the benefits available to Micro and small Enterprises [MSEs] of their participation in Govt. procurement in reference to Clause No. 1.15.1 of BLW Tender Document Rev. Year- 2026, Ver.01 (copy attached). If yes, please attach the requisite registration certificate issued by appropriate agency along with the offer. Please note that in absence of the requisite certificate, such benefits may not be extended.

   Document optionalConfirmation required
2. 2

   If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise [in percent of order value] with further breakup of MSE owned by SC/ST. [Information will be provided in percent terms with 6 fields, Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others].

   Document optionalConfirmation required
3. 3

   Any firm quoting on behalf of OEM must submit tender specific authorization certificate along with their offer and agree for inspection by the nominated agency (as the case may be) at the premises of their principals. Further, Principal firm shall assure full guarantee and warranty obligations as per the general and special conditions of contract in the Tender Specific Authorization certificate and mandatorily provide the contact number and email of the designated person in the Tender Specific Authorization for verification. Failure to comply with any of the requirements shall make the offer liable to be rejected.

   Document optionalConfirmation required
4. 4

   In case of Trader/Agent, the current and valid tender specific authorization certificate from their principals should be submitted. In case of O.E.M./ Manufacturer they should submit an undertaking that they are O.E.M. / Manufacturer. Offers from authorized agents will be considered only if they submit tender specific authorization from the manufacturer, failing which their offer will be ignored summarily without making any further reference to them.(Details as per Para 2.12.6 of BLW Tender Document Rev. Year- 2026, Ver.01.

   Document optionalConfirmation required
5. 5

   Firm should specifically mention the quantity which they can supply per month to BLW against this tender, which will be kept in view while ordering to ensure the availability of material at BLW as per requirement of tendered item.

   Document requiredConfirmation required
6. 6

   Tenderer must enclose required past credential of supply of same / similar tendered item to show that they are capable of supplying the tendered item and to substantiate their capacity to develop tendered item. The firm should enclose details of infrastructure of Plant & Machinery and testing / quality control, QAP [approval status by Approving Agency ], ISO certificate details and other relevant document for the tendered item.

   Document requiredConfirmation required
7. 7

   Class-I/Class-II local supplier' shall be required to provide alongwith the offer a self-certificate giving the percentage of local content of tendered item.

   Document requiredConfirmation required
8. 8

   Bidders must submit a certificate as per Para 1.15.3.3 of BLW Tender Document Rev. Year-2026, Ver.01 (uploaded with this tender). If such certificate given by a bidder whose bid is accepted is found to be false, this would be a ground for immediate termination and further legal action in accordance with law. Non submission of Certificate may lead to rejection of offer.

   Document requiredConfirmation required
9. 9

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.