Loading
Loading…
Loading…
Tender ID
Tender Value
₹66.6 L
EMD Value
₹1.3 L
Closing Date
8 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
KARWAR
2 conditions · 2 needing a document upload
4.2 Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turn over of V/N or V whichever is less, where: V= Advertised value of the tender and N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit Certificates to this effect which may be an attested Certificate from the concerned department /client or Audited Balance Sheet duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Note for 4.2 : Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India.
4.0Eligible Eligibility Criteria: 4.1 Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender Note for Item 4.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of 500 crore and above in last 3 (three) financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered, provided the work experience certificate has been issued by a person authorized by the public listed company to issue such certificates. In case, tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificate for all payments received and copy of final /last bill paid by company in support of above work experience certificate. 4.1.1 Similar Nature of work: " All Electrical works " . 4.1.2 The following will be applicable for evaluating the technical eligibility: 4.1.2.1 The Tenderer shall submit necessary proof in the form of valid documents/completion certificates from the respective principal clients in support of their technical capability. The client's certificate should inter- alia indicate the date of award, scheduled date of completion, actual date of start and completion of similar work indicating successful completion and final value of contract as per Appendix 2 & Appendix 3. 4.1.2.2 Only those works which have been executed for the Govt/ Semi Govt./PSU and Public listed company as mentioned under Note for item no 4.1 above shall be considered. 4.1.2.3 In case of composite works involving combination of different works, even separate similar nature completed works of required value shall be considered while evaluating the eligibility criteria. 4.1.3 The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Appendix-12. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document.
1 condition
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Power supply arrangement and electrification of proposed pit wheel turning lathe along with 35m x 15m covered shed at Madgaon station of Konkan Railway under Karwar region.
KR-KW-EL-T-42-2025
KR-KW-EL-T-42-2025
Open
Works - General
60 Days
Navi Mumbai, Maharashtra
₹0
₹1.3 L
8 Apr 2026
17 Mar 2026
25 Mar 2026
143 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 66,60,582 | ||
| — | 25.00 | — | — | ||
| Supply of RCC Hume pipe 150mm size 2 meter long. | — | — | — | 25,000 | |
| — | 25.00 | — | — | ||
| Supply of Collar for RCC Hume pipe. | — | — | — | 4,000 | |
| — | 25.00 | — | — | ||
| Laying & jointing of RCC Hume pipes of 2 mtr. Length including excavation of trench, refilling & consolidation. | — | — | — | 5,875 | |
| — | 900.00 | — | — | ||
| Supply of underground XLPE cable, armoured, aluminium conductor, 1100 V grade, 3.5 core size 185 sq mm conforming to ISS 7098 Part-I latest. | — | — | — | 6,35,400 | |
| — | 800.00 | — | — | ||
| Laying of LT cables above 95 sq mm in under ground including excavation of cable trenches, laying of cable, refilling & consolidation. | — | — | — | 2,92,000 | |
| — | 100.00 | — | — | ||
| Laying of LT cables above 95 sq mm through RCC Hume pipes / on support fixed on walls / structures etc. By means of cable clamps. | — | — | — | 15,000 | |
| — | 4.00 | — | — | ||
| Termination of 185 Sq mm cable and connecting including supply of aluminium lugs | — | — | — | 1,600 | |
| — | 4.00 | — | — | ||
| Supply & providing of cable gland for 185 sq.mm 3.5c Aluminium armoured cable. | — | — | — | 2,800 | |
| — | 1.00 | — | — | ||
| Fabrication, Supply, erection, testing and commissioning of LT Distribution panel, front double openable door and back openable with panel key locking arrangements of size 2100mm x 1800mm x 450mm, totally enclosed made of 14 SWG sheet steel metal with powder coated, bus bar 400 Amps Aluminium busbar colour coded RYBN with 1 No 400 Amps MCCB 4 pole incomer, 1 No of 250 Amps 4 pole MCCB, 2 Nos of 200 Amps 4 pole MCCB, 1 Nos of 125 Amps 4 pole MCCB, 1 No of 100 Amps 4 pole MCCB, 2 Nos of TPN MCB, 1 No of SPN MCB with KWH meter 1 No. digital Voltmeter, Ammeter, LED phase indicators and complete wiring duly mounted on fabricated MS stand of 400mm height. | — | — | — | 2,50,000 | |
| — | 100.00 | — | — | ||
| Supply of underground XLPE cable, armoured, aluminium conductor, 1100 V grade, 3.5 core size 95 sq mm confirming to ISS 7098 Part-I latest. | — | — | — | 47,500 | |
| — | 8.00 | — | — | ||
| Termination of 95 Sq mm cable and connecting including supply of aluminium lugs | — | — | — | 2,600 | |
| — | 8.00 | — | — | ||
| Supply & providing of cable gland for 95 sq.mm 3.5c Aluminium armoured cable. | — | — | — | 3,200 | |
| — | 100.00 | — | — | ||
| Supply of underground XLPE cable, armoured, aluminium conductor, 1100 V grade, 3.5 core size 70 sq mm confirming to ISS 7098 Part-I latest. | — | — | — | 32,500 | |
| — | 8.00 | — | — | ||
| Termination of 70 Sq mm cable and connecting including supply of aluminium lugs | — | — | — | 2,000 | |
| — | 8.00 | — | — | ||
| Supply & providing of cable gland for 70 sq.mm 4c Aluminium armoured cable. | — | — | — | 2,400 | |
| — | 150.00 | — | — | ||
| Supply of underground XLPE cable, armoured, aluminium conductor, 1100 V grade, 4 core size 16 sq mm confirming to ISS 7098 Part-I latest. | — | — | — | 23,850 | |
| — | 14.00 | — | — | ||
| Termination of 16 Sq mm cable and connecting including supply of aluminium lugs | — | — | — | 2,982 | |
| — | 14.00 | — | — | ||
| Supply & providing of cable gland for 16 sq.mm 4c Aluminium armoured cable. | — | — | — | 2,100 | |
| — | 200.00 | — | — | ||
| Laying of LT cables upto 95 sq mm in under ground including excavation of cable trenches, laying of cable, refilling & consolidation. | — | — | — | 60,000 | |
| — | 150.00 | — | — | ||
| Laying of LT cables upto 95 sq mm through RCC Hume pipes / on support fixed on walls / structures etc by means of cable clamps. | — | — | — | 15,000 | |
| — | 1.00 | — | — | ||
| Fabrication, Supply, erection, testing and commissioning of LT Distribution panel front double openable door and back openable with panel key locking arrangements of size 2000 x 1400 x 450 mm totally enclosed made of 14 SWG sheet steel metal with powder coated, 300 Amps capacity Aluminium busbar colour coded RYBN with 1 No 250 Amps MCCB 4 pole incomer, 2 Nos of 200 Amps 4 pole MCCB, 2 Nos of 125 Amps 4 pole MCCB, 1 No of 100 Amps 4 pole MCCB, 2 Nos of TPN MCB, 1 No of SPN MCB with KWH meter 1 No. digital Voltmeter, Ammeter, LED phase indicators and complete wiring duly mounted on fabricated MS stand of 400mm height. | — | — | — | 1,65,000 | |
| — | 5.00 | — | — | ||
| Concrete 1:3:6 complete with labor and all materials including shoring & shuttering. | — | — | — | 22,500 | |
| — | 80.00 | — | — | ||
| GI Bolts and nuts of sizes | — | — | — | 12,080 | |
| — | 150.00 | — | — | ||
| Fabricated MS angles, channels, etc. | — | — | — | 9,750 | |
| — | 50.00 | — | — | ||
| Supply of PVC pipe 40mm. | — | — | — | 10,750 | |
| — | 50.00 | — | — | ||
| Fixing of GI/PVC pipe on poles for taking cables for terminations. | — | — | — | 1,600 | |
| — | 70.00 | — | — | ||
| Supply and fixing of corrugated hard GI sheet cable tray of size 300 x 75 mm with supply of anchor bolt, brackets, clamps etc. | — | — | — | 71,750 | |
| — | 70.00 | — | — | ||
| Supply and fixing of pre-coated/ MS sheet fabricated powder coated anti rust sheet covering for cable tray of size 300 x 75 mm etc. | — | — | — | 49,000 | |
| — | 6.00 | — | — | ||
| Provision of earthing to RDSO guidelines vide No.CAMTECH/E/10-11/EL/EARTHING/1.0 of 12/2010 and ISS 3043 with 50mm dia (min.3mm thick) "C" class GI pipe 3 mtrs long complete with all connecting materials and labour. Scope also includes construction of earth chambers with pre-casted RCC chamber and cover, measuring of earth value and inscribing the same on chamber. | — | — | — | 60,000 | |
| — | 80.00 | — | — | ||
| Supply & laying of ACSR squirrel conductor for earthing duly saddling on wall and also in underground by excavation of soil & refilling after laying. | — | — | — | 5,360 | |
| — | 20.00 | — | — | ||
| Removing of RCC slabs of cable trench and re-laying of RCC slabs with proper cement finishing after laying of LT cable. | — | — | — | 4,000 | |
| — | 16.00 | — | — | ||
| Supply, fixing & connecting of 30 watts die cast aluminium weather proof LED street light fitting complete with high efficiency LEDs with drivers, degree of protection shall be IP65. Make of LED's will be Philips, Lumiled, Osram, Seoul Semiconductor, Cree. Light fittings shall have two circuits to operate as 15W or 30W as per requirement. | — | — | — | 40,000 | |
| — | 16.00 | — | — | ||
| Supply & fixing G.I bracket for LED street light fitting. | — | — | — | 4,800 | |
| — | 10.00 | — | — | ||
| Supply, fixing & connecting of 100 watts die cast aluminium weather proof LED flood light fitting complete with high efficiency LEDs with drivers, degree of protection shall be IP65. Make of LED's will be Philips, Lumiled, Osram, Seoul Semiconductor, Cree. | — | — | — | 60,000 | |
| — | 75.00 | — | — | ||
| Supply of 25 x 25 x 6 mm MS fabricated angle, welding to roof truss for fixing GI cable tray, painting with single coat of red oxide and dual coat of silver paint | — | — | — | 8,850 | |
| — | 1.00 | — | — | ||
| Supply, fixing & connecting of 250A bus bar box size 70cm x 70cm x 30cm wall mounted type made up of 14swg MS fabricated outdoor type weather proof enclosure with 4 Nos aluminium bus bar with suitable cable entry for 95/70 sq.mm 3.5c cable. | — | — | — | 11,000 | |
| — | 100.00 | — | — | ||
| Providing sub mains for power sub circuits with multi stranded PVC insulated copper conductor 2 wire of size 4 Sq.mm 1.1 KV grade along with 1.5sq.mm multi stranded PVC insulated copper wire as earthing in PVC pipe/ casing capping wiring. | — | — | — | 41,000 | |
| — | 10.00 | — | — | ||
| Supply & fixing of 16Amps Modular type switch, plug sockets on surface mounting modular box, etc of Roma make or similar. | — | — | — | 9,000 | |
| — | 50.00 | — | — | ||
| Supply of material, fittings and wiring in PVC casing capping with single core PVC insulated CU conductor of size 1.5 sq. mm 1.1KV grade with 1.5 sq mm PVC wire as earth wire complete with Modular type switches and sockets for controlling light & fans etc fixed on modular boards surface mounting of ROMA make or similar approved make i) Light/ fan points | — | — | — | 40,000 | |
| — | 15.00 | — | — | ||
| Supply of material, fittings and wiring in PVC casing capping with single core PVC insulated CU conductor of size 1.5 sq. mm 1.1KV grade with 1.5 sq mm PVC wire as earth wire complete with Modular type switches and sockets for controlling light & fans etc fixed on modular boards surface mounting of ROMA make or similar approved make ii) 6 Amp plug points | — | — | — | 9,600 | |
| — | 150.00 | — | — | ||
| Providing sub mains for lighting and power sub circuits with multi stranded PVC insulated copper conductor 2 wire of size 2.5 Sq.mm 1.1 KV grade along with 1.5sq.mm multi stranded PVC insulated copper wire as earthing in PVC casing caping. | — | — | — | 31,500 | |
| — | 25.00 | — | — | ||
| Supply of energy efficient 20W LED tube type, 4 feet long light fitting of approved make. | — | — | — | 12,500 | |
| — | 25.00 | — | — | ||
| Fixing and connecting of energy efficient 20W LED tube type, 4 feet long light fitting of approved make. | — | — | — | 2,500 | |
| — | 5.00 | — | — | ||
| Supply of energy efficient 10W LED tube type, 2 feet long light fitting of approved make. | — | — | — | 1,625 | |
| — | 5.00 | — | — | ||
| Fixing and connecting of energy efficient 10W LED tube type, 2 feet long light fitting of approved make. | — | — | — | 250 | |
| — | 2.00 | — | — | ||
| Supply, fixing & connecting of MS Distribution box, single metal door, 4 way, 4+12 module suitable for flush/ surface mounting with all connecting materials, 2 neutral bar/ link with provision for TPN MCB as incomer and SP/TP MCB's as outgoing similar to L&T make, Cat.No. DBTPE004DD. | — | — | — | 10,000 | |
| — | 6.00 | — | — | ||
| Supply, fixing & connecting of Enclosure for MCB, metal door, 6 way, suitable for flush/ surface mounting with provision to mount MCB similar to L&T make, Cat.No. DBENC006SD. | — | — | — | 7,800 | |
| — | 8.00 | — | — | ||
| Supply of Miniature Circuit Breaker TPN 40 Amps. | — | — | — | 24,000 | |
| — | 8.00 | — | — | ||
| Fixing & connecting of TPN MCB | — | — | — | 600 | |
| — | 6.00 | — | — | ||
| Supply of 32/20/16/6A SPN MCB of approved make. | — | — | — | 2,760 | |
| — | 6.00 | — | — | ||
| Fixing & connecting of 32/20/16/6A SPN MCB. | — | — | — | 300 | |
| — | 15.00 | — | — | ||
| Supply of 32/20/16/6A SP MCB of approved make. | — | — | — | 5,250 | |
| — | 15.00 | — | — | ||
| Fixing & connecting of 32/20/16/6A SP MCB. | — | — | — | 750 | |
| — | 6.00 | — | — | ||
| Supply 1200mm sweep Ceiling fan, complete set of approved make | — | — | — | 21,600 | |
| — | 6.00 | — | — | ||
| Fixing & connecting of Ceiling fan 1200mm sweep complete with down rod, etc. | — | — | — | 1,200 | |
| — | 6.00 | — | — | ||
| Supply, fixing & connecting of Modular type Electronic regulator suitable for ceiling fan. | — | — | — | 3,000 | |
| — | 2.00 | — | — | ||
| Supply of 300mm sweep Exhaust fan, heavy duty, complete of approved make | — | — | — | 7,000 | |
| — | 2.00 | — | — | ||
| Fixing & connecting of 300mm sweep Exhaust fan, complete of approved make | — | — | — | 500 | |
| — | 2000.00 | — | — | ||
| Supply and laying Bricks 225X100X75 mm size. | — | — | — | 40,000 | |
| — | 20.00 | — | — | ||
| Supply and laying of CI cable route marker embossed with LT cable | — | — | — | 5,000 | |
| — | 5.00 | — | — | ||
| Supply of FRP box size 170mm x 170mm x 105mm with hinged door, outdoor type with 4 way connector & fixing of the box with suitable nut bolts on MS patti frame complete. | — | — | — | 5,500 | |
| — | 1.00 | — | — | ||
| Supply, fixing & connecting of 3 phase CT operated -/5A base mounting KWH Digital LCD display Energy meter including 400/5 Amps 03 nos CT's with GED MRT test reports for energy meter and CT's. | — | — | — | 15,000 | |
| — | 1.00 | — | — | ||
| Supply, loading, transportation and unloading of 400KVA Diesel generating set with alternator of 400 KVA output continuous rating, 3 Phase, 415 Volts, 50 Hz, 0.8 p.f. A.C supply, a totally enclosed air cooled/liquid cooled multi-cylinder diesel engine developing suitable BPH at 1500 rpm with 10% overload for 1hour in 12 hour, along with standard accessories, self excited, self- regulated screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5%, with performance class G2. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switch gears, indicators connected with suitable wires/cables, fuel tank minimum capacity 400 Ltrs, maintenance free batteries with leads, provided with suitable single phase battery charger with all connecting accessories, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 DB (A) at 1.0 m, provided with first filling of oil, etc as per the CPCB-IV+ approved norms of Kirloskar make or any approved make. Includes submission of various test certificates (Pollution Control Board/ its authorised agency, etc). | — | — | — | 38,34,800 | |
| — | 1.00 | — | — | ||
| Supply, erection and commissioning of AMF Control panel consisting of Auto/ manual control PCB with all standard features, safety's, etc ; 02 nos 630A 4 pole MCCB (GED & DG incomer), 02 nos 630A 4 pole power contactor (GED & DG incomer) and 02 Nos 630A 4 pole Change over switch (Bypass/ Auto mode and GED/DG bypass mode mechanical COS in case of contactor failure) with internal copper cable wiring suitable for 630A capacity, selection switches for Auto/ manual mode, generator ON/OFF mode and GED & DG bypass mode. | — | — | — | 3,55,000 | |
| Lumpsum | 1.00 | — | — | ||
| Co-ordination/ liasioning and chasing with GED/ EIG for availing EIG approval, arranging EIG's inspection and formal approval for commissioning of DG set including EIG inspection fees, any other charges/ fees, etc. | — | — | — | 35,000 | |
| — | 1.00 | — | — | ||
| Erection, testing and commissioning of 400 KVA DG set includes connecting of 04 Nos GI strip earthing to DG set body and neutral | — | — | — | 15,000 | |
| Lumpsum | 1.00 | — | — | ||
| Fabrication, erection and provision of covered shed with 3" dia GI pipe, MS angle/ square tube frame support and tin sheet for 400 KVA DG of suitable size with all connecting accessories including welding works, pipe foundation concreting, duly 2 coat Red oxide paint and two coat Black enamel paint | — | — | — | 75,000 | |
| — | 50.00 | — | — | ||
| Supply of GI strip 25 x 5 mm for earthing | — | — | — | 6,150 | |
| — | 50.00 | — | — | ||
| Laying of GI strip 25 x 5 mm for earthing | — | — | — | 2,550 | |
| — | 6.00 | — | — | ||
| RCC Plinth concrete 1:3:6 complete with labour and all materials including shoring & shuttering for base of 400KVA DG set, size - DG set base size plus 300mm extra on all sides and depth 600mm | — | — | — | 36,600 | |
| — | 1.00 | — | — | ||
| Fabrication, Supply, erection, testing and commissioning of box front openable door with panel key locking arrangements of size 800(H) x 600(W) x 450(D) mm totally enclosed made of 14 SWG sheet steel metal with powder coated wall mounted consisting of 1 No 400 Amps MCCB 4 pole. | — | — | — | 40,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderdocument.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .