Improvement works to the MM and Spares Division in Adm. Building at TTPS

Providing wooden platform with scaffolding arrangement using 10 to 13cm dia. Casurina posts and 40mm thick country wood planks for providing platform over the scaffolding including cost of all materials labour, lead, lift etc., complete.

Dismantling the existing RCC for the required width & depth as per the instructions of engineer in charge including cost of all materials, labours, lead, lift, curing, etc. complete.

Providing RCC 1:1.5:3 50mm thickness using OP cement with 6 to 10mm chips including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work.

Supplying & providing RTS/MS rod including cutting, bending, tying & fixing in position as per specification including binding wires, cost of all other materials, labours, lead, lift, curing, etc. complete.

Brick work in CM 1:5 using class II bricks including cost of all materials, labours, lead, lift, curing, etc. complete.

Plastering with C.M 1:3, 12 mm thick including cost of all materials, labours, lead, lift, curing, etc. complete.

White washing one coats with shell lime including cost of all materials, labours, lead, lift, scaffolding, curing, etc. complete.

Chipping the existing concrete and roughening the surface for future bonding and thorough cleaning the surface including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying and fixing Johnson / equivalent vitrified endura tiles/ marbonite nano polish tiles of 600mm x 600mm x 8mm thick of approved make and colour laid over 20mm thick cm 1:3 and neatly pointing with joint filling including finishing the joints and pointing flush including cost of materials, labour, lead, lift, etc. complete. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing and fixing in position of Aluminium anodized glazed single leaf door with inner frame section using 45x45x2mm for top and middle and vertical, door frame section using 100x45x2mm for door and shutter bottom with 5mm thick plain glass with sun control film on top and bottom using aluminum anodized beading with all necessary standard hardware such as handle, tower bolts, safety rod with full thread locking arrangement hind ware make or equivalent hydraulic door closer with double speed adjustment including 1 No etc., complete including cost of all materials, labour, lead, lift etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi hampered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all-round the frames. The window should be got approved from the Executive Engineer before use on work.

Providing and fixing in position anodised Aluminium fixed glazed partition of approved manufacturer with 65 x 38x 2mm section on top and bottom vertical frame all fitting fixtures confirming to relevant IS to ensure smooth operation and top glazed with 5mm thick plain glass panels and bottom with 12mm thick prelaminated particle board (Novopan sheets) panels fixed using anodized Aluminium beadings and rubber lining with standard hardwareincluding cost of all materials , labour, lead, lift etc., complete

Providing and fixing of anodized Aluminium partition works with 65x38mm Aluminium section as frame with 12mm thick prelaminated particle board (Novapan sheet) panels fixed using anodized Aluminium beading and rubber lining with standard hardware including cost of all materials, labour charges, all leads, lifts etc., complete.

Supplying and fixing of cuddapah slab laid in CM 1:3, 20mm including cost of all materials, labours, lead, lift, curing, etc. complete.

Painting with approved quality Varnish wood work two coats including cost of all materials, scaffolding charges, labours, lead, lift, etc. complete.

Painting two coats with ready mixed enamel paint for the old/wood surfaces including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydraulic hinges, tower bolt, handles, multipurpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work.

Providing false ceiling with False ceiling tiles / perforated board of 12 mm thick of size 0.60 x0.60 cm over the Aluminium frame with 'T' section of size 25x25x1mm, 500mm c/c on one direction and 1000mm in other direction and angle of size 25x25x1mm alround with 6m M.S rod suspension of 600mm average length at 1000mm c/c both ways and cutting, fixing of 20mm dia pipe or angle in the wall, making holes and plugging the ends with CM etc., including cost of all materials, labour scaffolding, etc., complete.

Dismantling of wooden partition/ Door/Aluminium Partition including cost of labour, lead, lift, etc., complete.

Supplying and fixing of new wooden partition with country wood planks of finished size 0.04x0.052m at 0.90m C/c with water proof plywood of 18mm thick including cost of all material, labour, lead, lift, scaffolding charges, fevicol, nails, screw and GI 'L' 3" length required MS Flat etc., complete.

Supplying and fixing of solid core flush door - Exterior Grade -18mm thick waterproof ply wood withOST finish both faces including cost of all other materials, labour, lead, lift, etc., complete.

Providing two coats of Acrylic distemper of approved quality, brand & colour for old ceiling & inner wall surfaces including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.

Providing two coats with ready mixed plastic emulsion (interior walls) of first class quality paint & approved colour over a priming coat including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.