Repair and re-organisation of 11KV OH line from Makoli pump station to Tarmi substation under Tarmi OCP at SDOCM, Dhori area

Amount

Erection of steel tubular pole of length exceeding 10 mtrs but not exceeding 12 mtr in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required ( pole supply by department )

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. asrequired (conductor Deppt supply)

Supplyinganderectionofgalvanisedstaysetfor11KVoverhead lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turnbuckle (20mmX600mm), 7/4.00mmdiaG.I.stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement:3coarsesand:6gradedstone aggregate 40mm nominal size ) foundation including excavation and refilling etc.as required

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of 11 KV pin insulator complete with large steelheadG.I.pin,nuts,washersetc.asrequired

Supply and errection of 8 SWG GI wire for earth continuity

Supply and errection of 8 SWG GI wire for cradling

Erection of cradle wire

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erectionofpoletop/straighttwowire/Vshapetwowire,angleiron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/ 33 KV asrequired.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50mmX50mmX6mm (angle iron bracket welded to the channel iron and complete with 50mmX6mm M.S.flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint asrequired

Erection of double pole 3 wire cross arm for 11KV over head lines as required.

Supplying and erection of a set of cross bracing FRLSame work for11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required.

Transporting of pole from unit store/existing site to propose site

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. asrequired.

Dismantling of overhead lines comprising of copper/aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required

Providing & fixing of PG clamps

Numbering of pole

Supply and providing of male, female contact, copper wire net 1.5 mtr long, moving contact etc of set of GOS 11KV.

Reparing of GOS 400Amp at diffenr location of TOCP area

Providing of 800 amp GOS

Fitting & fixing of GOS

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared

Connection of cable leads as required.

Connection of OH jumper as required.

Cutting of tree

Patrolling, checking, and testing of OH line for routine maintenance and breakdown as and when required.

Supplying and erection of 11 KV pin insulator complete with large steelheadG.I.pin,nuts,washersetc.asrequired for fitting of lighting arrester

Supply & erection of M S nut bolts for lighting arreaster

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of pole top/straight two wire/Vshape two wire,angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/ 33 KV asrequired.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required

Making of chemical earth pits with providing of GI pipe 3 mtr long

Providing and fixing 25mmx5mm G I strip in 40mm dia GI pipe FRLS on earth electrode including connection with brass nut bolts etc as per required

Pole muffing

Painting of red oxide paint for steel tubler pole

Painting of yellow/alluminium paint for steel tubler pole

Numbering of pole

Providing & fixing of danger board

Total impact of GST for the purpose of CTC

ARJUN ENTERPRISES

M/S SHIV PARBATI ENTERPRISES