Construction of first floor over the Maduravoyal 33/11KV indoor SS control room building for office accommodating the four number of section offices,sub division office,FOC units and cash collection centre

Amount

Laying reinforced cement concrete M25 using 12MM to 20MM HBG metal and 400kg of minimumcement content for various types of work including necessary, strutting,shuttering, formwork, lead, lift, labour etc., complete but excluding cost of reinforcement I FIRST FLOOR

Column size 0.40 x 0.50 m

Column size 0.35 x 0.45 m

Lintel and Sill Beam

Sunshade. Loft

Stair case and Landing Slab

II SECOND FLOOR

Column

Lintel and Sill Beam

Roof Beam ( Head Room )

Roof Slab ( Head Room )

Dismantling the RCC, PCC and brick masonry any met with during execution below ground level including labour, tools etc,. complete.

Reinforced Cement Concrete

Plain Cement Concrete

Brick masonry

Laying reinforced cement concrete M25 using 12MM to 20MM HBG metal and 360 kg of minimum cement content for various types of work including necessary, strutting, shuttering, formwork, lead, lift, labour etc., complete but excluding cost of reinforcement.Pile Cap,Grade Beam, Column Footing and Column Below G.L. etc.,complete.

Precast slab

Waist Slab

Supplying and placing of ready mixed concrete in M25 Grade Mix from reputed suppliers on approval by board engineers for floor slabs, beams with necessary centerings and form work including cost of all materials, conveyance, T&P, labour complete. (Excluding cost of reinforcement).

First Floor Beam

First Floor Slab

Supply, fabrication and placing reinforcement for all R.C.C. works including cost of steel and all lead, lift, labour for cutting, bending and placing reinforcement as per plan and tying with binding wire and including cost of binding wire, labour and work at all levels etc., complete.

Brick work in cement mortar 1:6 using II sort stock bricks chamber burnt of size 9" X 4.5"X3" at all levels including cost of all required materials, labour, lead, lift,etc., complete as per std.specification.

First Floor

Second floor

Brick work in cement mortar 1:5 for 115mm thick partition wall using II sort stock bricks chamber burnt of size 9" X 4.5"X3" at all levels including cost of all required materials, labour, lead, lift,etc., complete as per std.specification and direction.

First floor

Second floor

Building brick cornice work over parapet wall using II sort stock bricks, chamber burnt 9"X4.5"X3" in cm 1:4 and plastering with cm 1:5, 12MM thick including cost of all required materials, labour, lead, lift,etc., complete.

Plastering with cement mortar as indicated below including cost of all materials and all leads, lifts, labours, for plastering at all floors including labour, scaffolding, curing, etc, as per standard specification.

Ceiling plastering with CM 1:3; 10mm thick.

Cable duct and water tank with cement mortar 1:5 12mm thick with water proof compound 1kg/bag of cement etc.,

Ceiling plastering with CM 1:4; 12mm thick.

Stucco Plastering with C:M 1:5, 12 mm thick

Providing Sunshade drop to an overall thickness 75mm, using M20 Design mix using 300kg minimum cement content and using 3 to 6mm HBG chips with necessary Chicken mesh and shuttering and plastering with cm 1:4, 12mm thick on both sides to uniform level and thickness and neat finish including cost of all materials, labour, scaffolding , lead, lift etc., complete. [ Excluding cost of Reinforcement ]

Laying weathering course with one course of pressed tiles 200x200x20MM size approved and branded quality for roof slab to set in cement mortar 1:3 and mixed with crude oil 5% by weight of cement and pointing the tiles with same oiled mortar and over a bed of brick jelly (20mm size) and mixed with lime 1:2 mix for 80mm thick including cost of all materials and complete as per standard specification.

Wall finish skirting with glazed tiles of approved make and shade to set in CM 1:2, 10mm thick including cost of tiles and all leads, lifts, labour etc., as per standard specification.

Flooring with anti skid tiles or equivakent to set in cement mortar 1:3 for bath and F.O.L flooring including cost of tiles, all lead, lifts, labour for fixing finishing neatly as per standard specification and as directed by the Engineer-in-charge tiles colour and shade to be got approved by the Executive Engineer.

Flooring with vitrified tiles of approved quality and colour to set in cement mortar 1:2 10 mm thick for first floor 10mm thick, 60x60 cm size including cost of industrial tiles, all lead, lifts, labour for laying fixing finishing neatly as per standard specification and as directed by the Engineer (industrial tiles colour and shade to be got approved by the Executive Engineer before execution).

Flooring with prepolished hydraulic pressed non-skid,vibrated concrete tiles or equivalent to set in cement mortar 1:3 for steps including cost of tiles, all lead, lifts, labour for fixing finishing neatly as per standard specification and as directed by the Engineer-in-charge tiles colour and shade to be got approved by the Executive Engineer before use.

Supplying and fixing of country wood door using kongu scantlings, door frame of size 0.10x0.075m and shutter frame of size 0.10x0.030m and over fixing with 6mm thick 100% water proof plywood Kitply/ mutiply/ Greenply for both sides and in front side fixing with sunmica sheet 1mm thick teak shade matt finish and teak wood lipping and fitting with best quality anodized aluminum tower bolt- 2nos, handles-2nos, aldrop, door stopper, m.s. hold fast and hinges, godrej 4 lever mortice lock with keys including cost of all materials, leads, lifts, labour for making door and fixing in position as directed by Engineer-in-charge.

C.W. Door of size 1.18x2.10m

C.W.Door of size 0.915x2.10m

Suuply and fixing of approved make door closer with necessary accessoriess including cost of tools and plants materials etc. Complete.

Supplying and fixing of PVC door of size 0.750x2.100m as per plan and as directed by engineer at site and including cost of all materials and all leads lifts, labour and the PVC shutter by single mould SINTEX make with furniture fittings 3nos. 75mm Ano.Alu.hinges, 2nos. 150mm tower bolts, 150mm aldrop and fixing in position and with all fitting iron hold fast etc.,as per standard specification.

Supplying fabricating & fixing in position of anodized aluminum natural color matt finish glazed sliding window including ventilator head of size 1.18x1.48m in accordance with ISI 1868, 1962 for bottom gutter arrangements so as to drain the water entry and extruded aluminum section of bottom track of size 62 x37mm with gutter arrangements at 1.218 kg/m side and top track of size 62x31.5mm at 0.778kg/m for shutter plain top and bottom section of size 40 x 18mm at 0.38kg/m plain side vertical section of size 40 x 18mm at 0.493kg/m inter loading vertical section of size 40 x 18mm at 0.63kg/m ventilator box frame 63 x37 at 0.850kg/m switch lock,special rubber,L angle,aluminum clip 17.15x17.27 1.5mm thick 0.128kg/m screws & fixing 4mm thick frosted glass etc, complete & including cost of all materials,lead,lifts,labour for fabricating & fixing in position including drilling holes in RCC work and brickwork etc.,with power drill to the required extent and made to the original condition after fixing etc. The aluminium frame is to be anodized with matt finish under electrically. Control condition in accordance with 1868/ 1962.Specification for an average anodic film thickness not less than 5 microns and all the materials should be got approved from the EE before use.

Supplying and fabricating and fixing in position of anodized aluminum natural color matt finish louver type ventilator of size 0.915 x 0.580 m glass fixing anodized aluminum grove clip with screws and fixing 4mm thick frosted glass louver model including cost of all materials and all leads, lifts, labour for fabricating and fixing in position including drilling holes in R.C.C. work and brick work etc, wherever necessary with power drill to the required extent and made to the original condition after fixing etc, complete. The aluminium frame is to be anodized with matt finish under the electrically controlled condition in accordance with I.S specification for an average anodized film thickness of not less than 5 microns and all the materials should got approved by Executive Engineer before use.

Providing grooves of size 25mm width and 6mm deep on the green plastered surface to alignment and neat finish using extra cement as per direction.

White washing with cement paint, two coats over a coat of primer for ceiling, sunshades, lofts and other surface at all levels and all floors, all materials, leads, lifts, labour for scaffolding brush etc. complete.

Inside Wall paint two coats with best quality plastic emulsion of approved colour with two Coats over a primer coat and putty over cement plastered surface including cost of all materials , leads, lifts, labour , scaffolding etc., complete.

Outside Wall paint with best quality Emulsion of approved Colour two Coats primer using white Cement and putty plastered surface at all levels including all materials, scaffolding,leads,lifts,labor brushes curing etc., complete.

Painting new wood work with two coats of enamel paint over a coat of wood primer [colour and brand should be got approved by Engineer including cost of all materials, leads, lifts, labour , etc., complete

Supplying and fixing cudappa slab sink of various size for min. depth of 0.45m and slab thickness 38 to 40 mm including cost of all materials, labour for fixing etc., complete

Supplying,fabricating and fixing in position of MS grills, gates,name boards, handrails and ladder,etc.,at various levels as per approved design of the Engr.including cost of steel and other required materials, labour charges, transportation and fixing, taking grooves in BM/RCC, packing the pockets with CC and painting with one coat metal primer complete.

Window grills, stair case grills, ladder

M.S.Channel & M.S angle

Supplying, laying and jointing of PVC pipes of approved brand and ISI quality for waterline, sewerline, and rainwater downfall pipe etc., including cost of all materials and GI specials, fixing the pipes over BM/CC surfaces by taking grooves and fixing wooden plugs, screws firmly with special clamps as directed.

PVC Pipe 110mm dia. 6kg/sqcm

PVC Pipe 50mm dia. 10kg/sqcm

PVC Pipe 40mm dia. 10kg/sqcm

PVC Pipe 32mm dia. 10kg/sqcm

PVC Pipe 20mm dia. 10kg/sqcm

P.V.C ASTM Threaded pipe 32mm dia 15 kg/sq.cm

P.V.C ASTM Threaded pipe 25 mm dia 15 kg/sq.cm

Supplying and fixing of G.M.Wheel valve ISI make, branded and approved quality and brass screws down top etc, including cost of all materials, all leads, lifts, labour for fixing etc.,complete.

50 mm G.M. Gate Valve

40 mm G.M. Gate Valve

32mm G.M wheel valve

25mm G.M wheel valve

20mm G.M wheel valve

C.P Screw down tap 12mm

32/25 GI union for pumps

Supplying and fixing of glazed 22"x16" wash basin (ISI quality of approved brand) with C.I. brackets c.p.pillar tap and all connection of water inlet and waste water connection 12mm wheel value soap container and fixing of 5mm thick mirror best quality approved brand. Mirror should be framed in anodized aluminium frame 2"x16" of size complete as per standard specification and as directed by engineer.

Supplying and fixing of water closet with ‘P’ or ‘S’ trap with double flapped seat and seat cover with brass hinges and 10lit capacity PVC low level flushing tank with all fittings including cost of all materials,all leads, lifts, labour for fixing etc, complete as per standard specification.

European Water Closet.

Indian Water Closet.

Supplying and fixing of PVC Bibcock of best quality of approved brand wherever required including cost of all materials, leads, lifts, labour for fixing etc., complete.

Supplying and fixing of Automatic flushing urinals of ISI quality of approved brand EFS-integrated DC white with all fittings in-let and outlet pipe wheel valve 12mm dia. size including cost of all materials, leads, lifts, labour for fixing etc., complete.

Automatic Flushing

Supplyng and Providing Cash Collection Centre Table of over all size of 1.30 x 0.60 m and to a height of 0.75 m by using 18 mm thick approved quality piywood along with cash drawer arrangments with Denomination boxes and arrangements for placing CPU, UPS and battery with lock and handle cash drawer,keyboard and hand rest counter back and counter sides,separates arrangements and all outer edges finished with teak wood lipping with outer area / usage area by 1 mm thick Sun mica of approved quality and colour all others areas such as not visible by planning with two coats enameled paint matt finish over one coat of primer,necessary holes for cables,paper solt, wheeling arrangements for key board and the counter sides extended to a length of 1.30 m from the table and with hand rest arrangements of 0.60 m equalies space on consumer sideand counter side with counter separation at every 1.33 c/c as directed by the Engineer at site, including cost of all materials, with labour and lead,lifts,etc,complete.,

Supporting,Fabricating and fixing in position Ano.Alu.Natural colour matt finish fixed type glazed partition with extrude Alu. Fabricated grill for Cash Collection Counter 1.50 m height with opening door ( 300 x 300 mm ) using Ano.Alu.Rectangular type of size 62 x 37 mm 0.62 kg/m on both sides of commercial size with 5 mm thick plain glass of 1.50 m height approved quality and clip 17.15 x 17.27 mm 0.178 kg/m fixing rubber lining on top of Ano. Alu. Rectangular hollow section 1.0 m Vertical 1.75 m height with 8 / 9 mm thick Novapan / Duratuff Both sides Prelaminated Exteroir grade particle board, as per drawing including necessary Alu. " L ' angle, cost of all materials, leads,lifts,labour for fabrication fixing in position etc,complete.,

Supplying and fixing of Alu. Partition with 62 x 37 x 1.60 mm @ 0.62 kg/m Ano. Alu Rectangular hollow section vertically 1 m c/c and bottom 2.10 m height with 8 mm/ 9 mm thick exterior grade Novapan / Duratuff Both sides Prelaminated particle board & balance top porition with Ano.Alu. 9 mm thick Aero grill as per drawing, including necessary Alu. " L " angle cost of all materials,leads,lifts, labour for fabrication fixing in position etc, complete,.

Supplying and fixing of Alu. Partition 67 x 32 x 1.60 mm @ 0.62 kg/m Ano.Alu. Rectangular hollow section 1 m c/c vertical 2.10 m height with 8 mm/9 mm thick novapan Duratuff bothsides prelaminated exteroir grade particle board as per drawing including necessary Alu. " L " angle cost of all materials leads,lifts,labour gor fabrication fixing in position etc, complete.,

Supplying and fixing of Door for Cupboards using Kongu Wood Scantlings, 0.10 x 0.038 m water proof plywood 18 mm thick fixed with Sunmica 1 mm thick of approved colour and brand for front side and back side must be painted with enamel paint and fitted with multipurpose lock,handle and Alu. Tower bolt 2 nos inside for each cupboards including cost of all materials,leads,lifts,labour for making and fied in position etc, complete.,

Supply and fixing Alu.Door with45x45x1.6mm 0.62kg and 100x45x1.6mm @ 1.28kg/m Ano.Alu.Box Section with 8/9mm thick Novapan both side prelaminated exterior grade particle board including necessary Alu "L" angle Alu.tower bolt ,Alu.Door stooper hinges with lock and keys of approved size brand and quality including cost of all materials,leads, lifts,labour charges for fabricating and fixing in position etc, complet,.

Supply and fixing Alu.Door with45x45 mm and 100x45 mm Ano.Alu. Box section with Novapan both side prelaminated exterior grade particle board. Top 1.10 m with 5 mm thick Modiguard Plain Glass,including necessary Alu. "L" angle,rubber lining,glass clips 17.15x17.27@ 0.178kg/m Alu.towr bolt, hinges with lock and keys of approved size

Supplying and providing 30 cm dia. Circular Plastic number plate with number for identification of counter as directed by the Engineer at site, including cost of all materials, leads,lifts and fixing etc, complete,.

Supplying and fixing of Door for Cupboards Lofts using Kongu wood scantlings 0.10 x 0.038 waterproof plywood 19 mm thick fixed with sunmica 1mm thick of approved colour and brand for frontside and backside must be painted with enamel paint and fitted with multipurpose lock, handle and Alu.tower bolt 2 Nos. inside for each cupboards including cost of all materials,leads,lifts,labour for making and fixed in position etc., complete

Supplying,Providing and fixing of cupboards 0.45 m width with 3 racks using water proof plywood 19 mm thick branded quality with sunmica 1mm thick of approved colour and brand for front side & painted with enameled paint over a cost of wood primer for inside portion and fitted with multipurpose lock for each cupboards including Alu.Hinges 2 Nos. Handles 2 Nos. Alu.Tower Bolts 2 Nos. including cost of all materials teak,lifts.labour for fixing etc., complete..

Supplying and fixing Half Door with size 0.50 x 0.50 m ( Two Leaf ) with 8 / 9 mm thick Novapan both sides prelaminated exterior grade (Teak shade Matt Finish ) particleboard with necessary hinges, tower bolt, handles and screws including cost of all materials, leads, lifts, labour charges for fixing in position etc., complete

Supplying and fixing of PVC nainey trap 75mm dia. for letting out the bath room water including cost of materials, all leads, lifts, labour for fixing in position etc., complete.

Supplying and fixing of white marble stone of size 0.600 x 1.200m and 20mm thick for fixing in between urinals including cost of all materials, leads, lifts, labour for fixing etc, complete as per standard specification.

Supplying and fixing of white marble stone of size 0.600 x 1.200m and 20mm thick for fixing in between urinals including cost of all materials, leads, lifts, labour for fixing etc, complete as per standard specification.

Supplying and fixing of white marble stone of size 0.600 x 1.200m and 20mm thick for fixing in between urinals including cost of all materials, leads, lifts, labour for fixing etc, complete as per standard specification.

Name board using of size 2.500 x 1.500 m using 16mm thick MS.sheet board and 0.100 x 0.050 m,Sheet Gripping with 65 x 65 mm m.s. Angle as per plan and letter painting etc., complete.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu

K Rajkumar