IMPROVEMENT TO BLDG NO 332 AND ALLIED WORKS SERVICES AT VSN NAGPUR

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material and labour for non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm screed bed in cement mortar (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles all as specified and directed.

Material and labour for glazed ceramic colour tiles in vertical surface of size 350x 250x 7 mm/ 450X 350X 7mm thick over and including rendering 10mm thick CM 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour complete as specified and directed.

Material and labour for virified ceramic tiles dark shade/double charged/ ultra charged, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white r coloured cement to match coloure over and including 15 mm screed bed in cement mortar (1:6) in floors etc. complete as specified and directed.

Material and labour for 18-20 mm thick granite (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms ( for office name plate) and like in cement (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment ot match with shade of granite complete as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as specified and directed.

Material and labour for mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete as specified and directed.

Supply and fixing in repair stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete as specified and directed.

Supply and fixing PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fixing PVC(SWR) Bend 110mm bore complete all as specified and as directed.

Supply and fixing PVC(SWR) Tee 110mm bore complete all as specified and as directed.

All as per item No 9 abovbe but 75 mm bore.

All as per item No 10 abovbe but 75 mm bore.

All as per item No 11 abovbe but 75 mm bore.

Material and labour for for PVC (SWR) floor trap with grating 75 mm bore including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

Supply and fixing GI Tubes, ‘medium grade’, galvanised, concealed with all fitting 15mm ibore ncluding cutting of stone , concrete block or slab walls and making good complete as specified and directed.

All as per item No 16 above but 20 mm bore.

Supply and fixing high density polyethylene pipes (HDPE) 15mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. including taking down old one all as specified and as directed.

All as per item No 18 above but 20 mm bore.

Taking up or down steel tubing 15 mm bore and connections complete all as specified and as directed.

All as per item No 20 above but 20 mm bore.

Supply and fixing in repair cast iron nahani trap, with grating 100 mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

Supply and fixing in repair Bib Cock, fancy type high pressure, 15mm, Make ;-Prayag or equivalent.

Supply and fixing in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fixing in repair fancy type pillar taps, 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repair 2 way bib cock with wall flange, chromium plated, 15mm, bore complete all as specified and as directed.

Supply and fixing in repair Angle cock, chromium plated, 15mm, bore complete all as specified and as directed.

Supply and fixing in repair stop cock, chromium plated, 15mm, bore complete all as specified and as directed.

Supply and fixing in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Supply and fixing in repair tublar towel rail 20 mm dia chromium plated complete all as specified and as directed.

Supply and fixing in repair toilet paper holder with flap chromium plated complete all as specified and as directed.

Supply and fixing in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed

Supply and fixing in repair vitreous chain squatting pan, 'Orrissa pattern" size 630x450mm white with integral foot rests, including PVc ' P' or 'S' trap (excluding flushing cistern and flush pipe) complete bedding all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (Pedestal pattern), white, including fixing of flush pipe, nut bolts, brackets etc complete all as specified and as directed.

Supply and fixing in repair plastic water closet seat cover, soft close black/white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed.

Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

Supply and fixing in repair vitreous china wash basin counter sunk , white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve 450mm etc complete all as specified & as directed.

Supply and fixing in repair waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 6 Kgf/Sq cm complete all as specified & as directed.

Supply and fixing in repair vitreous china urinal, half stall type,white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed

Material and labour for for rendering 15mm thick on fair faces of brick work or concrete /block masonary/stone wall surfaces in cement mortar 1:4 , finished even and smooth without using extra cement with using WPC.

Material and labour for for rendering 10 mm thick in CM 1:6 over brick /stone wall/block wall/concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for for rendering 10 mm thick in CM 1:3 on ceillng, finished even and smooth all as specified and as directed.

Material and labour for preparation/ complete removel of existing surfaces old plastered walls apply distempering 2 or more coat with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Material and labour for preparing old plastered surfaces of ceilings and applying one coat of white wash with paint roller complete all as specified and directed.

Material and labour for preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls with paint roller complete all as specified and directed .

Material and labour for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed at any height incuding necessary scaffolding complete all as specified and directed .

Material and labour for waterproof/weather proof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.

Material & labour for applying two or more coats of 100% Premium acrylic external emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces. Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).

Material and labour for repair to crack including cutting V groove along cracks removing all dust and loosely laid particles using a blower wetting the crack using water and filling the crack using crack seal compound paste as per manufactures instructions and finishing using putty blade complete all as specified and directed at any height incuding necessary scaffolding. Make : Fosroc renderoc CS/ Sika cracksil/ Pidilite Dr fixit 217 Crack x Shrinkfree.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

Material and labour for for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed

Material and labour for peparation of old plastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed

Material and labour for preparation of old plastered external wall surfaces and applying one coats of cement base paint complete all as specified and directed

Material and labour for providing 75mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as Plinth protection/Path finished the surface even & smooth with out using extra cement complete all as specified.

Material and labour for powder coated aluminium (minimum thickness of powder coating 50 micron) for of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubularsections/ appropriate Z sections and other sections of approved ake conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete aser architectural drawings and the directions of Engineer-in-charge.

Material and labour for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

Supply and fixing 30mm thick (styles) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as shown on drawing on page 146 of SSR Part-II 2004 including taking down the old PVC door shutters as specified & as directed.

Taking down chowkats with shutters any decription (without taking off shutters from the frame) exe 1.5 sqm but n.exc 4sq.m all as specified and directed.

Taking down shutters of any description exe 1 sqm but n.exc 2 sq.m all as specified and directed.

Material and labour for aluminium alloy, anodised, sliding door bolt (250mm long) with hasp,nstaple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

Supply and fixing floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

Supply and fixing stainless steel butt hinges medium weight size 100mm long complete all as specified and as directed

Supply and fixing aluminium handles cast type anodised size 150 mm long complete all as specified and as directed

Supply and fixing aluminium anodiesed barrel tower bolt of extruded section size 200 mm complete all as specified and as directed.

Supply and fixing aluminium alloy, anodised,sliding door bolt with hasp 300 mm , staple (bolt type) and fixing clips of sheet, cast or extrudedsections and fixing bolts and sliding bolts of extruded ctions or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing 300mm,brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Material and labour for plain, solid, straight chowkats and frames of 2nd class hard wood , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

Material and labour for pressed steel frames 165 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike late, etc., complete all as specified and as directed.

Supply and fixing flush shutters, 30mm thick solid core construction, with blockboard core and plywood face panels, commercial type on both sides complete all as specified and as directed.

glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze/wire mesh , etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed.

Supply and fixing Harrison curtain rails, 19/20mm dia, fancy type powder coated aluminium alloy with fixing brackets, stops, rollers etc including taking down old one all as specified and as directed.

Material and labour for integral water proofing compound ISI marked complete all as specified and directed.

Material and labour for preparation of surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying water proofing liquid URP in two coats as per manufacture instruction mix with cement complete all as specified and directed.

Material and labour for dampness rectification on external wall surface :- surface preparation, removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammere etc up to brick level. Coating:- Applying two coats of Dr fixit pidifin 2k/ berger or equivalent (a two component , anti-fungal, acrylic waterproofing coating) over cleaned surface with brush and allowing it to dry for 24 hrs Finishing the surface: Applying plaster over the treated surface with water proofing compound and applying 1 coat of putty over plaster to provide proper finish after that one coat of acrylic based single component liquid elastomeric water proofing coating (Berger HS W/C roof guard or equivalent) with synthetic fibre @ 20% dilution over base coat and 2 coat of premium polyurethene based acrylic emulsion (Berger platina weather coat long life or equivalent in Nerolac/ Asian) as finish coat in desire shade after proper curing as directed. Note:- The cost for required scaffolding at any height shall deemed to be included in the quoted rate.

Taking down existing plaster, concrete /brick coba /tiling from the roof and roughening the surface ,wire brushing , cleaning and washing with water etc. , and removing the rubbish to a distance exceeding 1.5km outside the VSN and depositing where directed .

Material and labour for screed bed or bedding layer of mortar 20 mm thick in CM 1:4 with WPC for laying floor finishes all as directed.

Material and labour for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed with chemical compound as per manufactures instruction as approved by GE all as specified and directed.

Material and labour for grouting in roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC (model CEBEX100) or PIDILITE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/ voids/ honeycombing areas inside concrete with pressure of 2 to 4 Kg/Sqcm and continued till refusal. After grouting, nozzles to be sealed with the sealing compound/mortar etc, all as per manufacturers instructions and as directed. Note:- After ascertaining the location of leakage/ seepage/dampness under item No.3 here-in-before, this item shall be operated at the required location.

Material and labour for for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down carefully existing plaster and roughening the surface ,wire brushing , cleaning and washing with water etc. and removing the rubbish to a distance exceeding 1.5km outside the VSN and depositing where directed.

Ditto all as per item no.85 above but on vertical surfaces like parapet except brick coba/tilling etc

Material and labour for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even without using extra cement all as specified and directed. Note : WPC shall be measured and paid separately.

Material and labour for liquid water proofing concrete surface for roof/chajjas by applying 1 coat primer of Tiki Aquaseal ARR/PU S/PU AHS or equivalent in SIKA/ STP and then applying 2 coat of Tiki Aquaseal ARR/PU S/PU AHS or equivalent in SIKA/ STP as per direction of manufacturers including cleaning of existing surface all specified and directed . Note: Work shall be carried out through authorised applicator of the product.

Material and labour for preparation of surfaces of roof at any height and applying one coat of tile guard of approved shed including required scaffolding etc.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces all as specified and as directed

Disconnecting existing PVC water tanks of capacity exc 250 litres & n. exc 500 litres setting aside (or lowering) for repair work and hoisting , reconnecting, refixng in the same position complete all as specified and as directed.

Disconnecting existing PVC water tanks of capacity exc 500 litres & n. exc 1000 litres setting aside (or lowering) for repair work and hoisting , reconnecting, refiXing in the same position complete all as specified and as directed.

Dismantling existing PVC water tanks of capacity exc 500 litres & n.exc 1000 litres all as directed and removed from site. NOTE:- Dismantled water tank shall become the contractors property as per Sch of credit.

All as per item No 93 above capacity exc 250 litres & n.exc 500 litres.

Supply and fixing 500 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed .

All as per item No 95 above but 1000 litres capacity.

Supply and fixing gun-metal, globe or gate valves 20mm , with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed .

Supply and fixing ball brass valves 20 mm , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed .

Material and labour for repairing of roof, chajjas etc with and including comprising of the following steps:- (a) Cleaning & drying thoroughly existing surface of roofs, chajjas, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. (b) Removing loose concrete, surface cracks etc. and then applying/ filled with Dr Fixit crack X or polymer modified mortor in case of wider cracks (bitumen based waterproofing treatment must be removed by mechanical scarification) (c) Applying one coat Dr fixit roof seal top coat (diluted with water 2:1) at the rate of 100-110 sqft/ltr and then allow it to dry for 2-3 hrs (d) Applying two coats Dr fixit roof seal top coat (diluted with water 2:1) embed a glass fibre mest (2 x 2 mm - 40 gms) between the first and second coat as reinfocement complete all as specified and directed. Make: Dr Fixit roof seal or equivalent in SIKA/ STP as approved by GE Note: Work shall be carried out through authorised applicator of the product.

Material and labour for for repairing of walls and other vertical surfaces with and including comprising of the following steps:- (a) Cleaning & drying thoroughly existing surface of walls for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting (b) Removing loose concrete, surface cracks etc. up to 5 mm width must be fillied with Dr Fixit crack X or polymer modified mortor in case of wider cracks (c) Use Dr Fixit Raincoat Neo directly from the container (stir content well before use) with brush /roller apply a self priming coat of Dr Fixit raincoat Neo on the vertical surface in SSD condition diluting 1 Ltr coating with 100 mm clean portable water (d) Applying two coats of Dr Fixit raincoat Neo without dilution as waterproof top coat either by roller or brush with force coverage at the rate of 3.7 -4.1 Sqm/ltr to achive 100-110 micron DFT complete all as specified and directed. MAKE: Dr Fixit rain coat neo or equivalent in SIKA/ STP as approved by GE Note: Work shall be carried out through authorised applicator of the product.

Excavation in trenches n.exc. 1.50 mtr in depth and n.exc. 1.50 m wide in hard/ dense soil for drain pipes, manholes etc.

Returning,filling in including spreading levelling,watering and well ramming in layers n.exc 25 cm thick in layers etc completed all as specified and as directed.

Removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point completed all as specified and as directed.

Material and labour for for concrete bed in P.C.C ( 1:4:8), type D-2 (unreinfored) (using mm graded aggregate ) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for 200 mm dia pipes all completed and as directed.

All as per item No 104 above but 300 mm dia pipes

Material & labour for 200 mm bore reinforced concrete pipes ,class NP2 ,laid and jointed complete with collars all as specified and directed

All as per item No 106 above but 300 mm bore.

Material and labour for for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in foundation for manholes & drains completed all as specified and directed.

Material and labour for precast cement concrete 1:3:6 type C1 as in manhole covers including form work etc all as specified and as directed.

Material and labour for mild steel TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking , bending and binding with MS wire (annealed) not less than 0.9 mm dia all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry work any type of CM complete all as specified and as directed.

Material and labour for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and as directed.

Material and labour for for cement concrete 1:2:4 type B0 (using 12.5 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ot provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

INTERNAL ELECTRIFICATION

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and as directed by EIC.

Material and labour for sub main wiring (concealed) complete with four single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 5 run of 6 sqmm&one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer cover of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c) One exhaust fan point controlled by one switch.

(d) One bell/ buzzer point controlled by one push switch.

(e) One switch socket outlet modular type 3 pin 6 amp on same board.

(f) One light point controlled by two, two way switches,

All as per item No 118 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

All as per item No 118 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Note for Item No. 114 to 125 :- The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate for point wiring shall be deemed to include the cost of making good.

Supply and fixing LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V of make : CG Cat Part No. LSTS-25-CDL :- Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed.

Supply & fixing new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/ Wipro.

Refixing serviceable LED tube 4ft 20 W LED batten and connecting up including provision of cable from ceiling rose or connector to LED Tube as specified and as directed.

Supply and fixing 0-4 step, two module, modular type electronic regulator for ceiling fan 1200 mm sweep, 230 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531 or equivalent in L & T/ Seimens

Supply and fixing bell ding dong type , AC, single pole one way 230 volts.

Supply and fixing bell push switch, modular type, 6 Amps, 1 module, 230 volts all as specified and as directed . Make : legrand Cat No. 675504 or equivalent in L & T/ Seimens

Supply and fixing switch modular type single pole two way 6 amps 230 volts, all as specified and as directed. Make : Legrand Cat No 675502 or equivalent in L & T/ Seimens

Supply and fixing switch modular type, single pole one way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in L & T/ Seimens

Supply and fixing socket modular type 6 Amps 3 pin 2 module 230 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in L & T/ Seimens

Supply and fixing for ceiling rose, surface bakelite, 65 x 50 mm, three terminals ISI marked all as specified and as directed.

Supply and fixing socket modular type 6/16 Amps, 3 pin combine, 2 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in L & T/ Seimens

Supply and fixing switch modular type 16 Amps,one way with indicator, 1 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in L & T/ Seimens

Supply and fixing sheet metal enclosures DPX 160 DB V-TPN in provision for incorporating MCCB 63-100 Amp as incoming & MCBs, TP, 6 way as outgoing, IP-54 with metal double door with 200 amps rated busbar, 415 volts, as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507751 or equivalent in L & T/ Seimens

Supply and fixing sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-43 with 100 amps rated bus bar with metal double door, 415 volts, as per IS-8623 including taking down the old Old u/s TPN DB, all as specified and as directed. Make : Legrand Cat No 507670 or equivalent in L & T/ Seimens

Supply and fixingDPX 160 MCCB TPN in provision, 125 Amps, breaking capacity 16 KA confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and directed.

Supply and fixing MCB TP in provision, 25 to 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and directed.

Supply and fixing MCB TPN, 40-63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and directed. Make : Legrand Cat No. 408683 or equivalent in L & T/ Seimens

Supply and fixing MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

Material and labour for earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 3 of SSR PART 1 of 2009 to the earthing test point complete all as specified and as directed. Note :-The cost of excavation and earth work PCC pit and RCC cover funnel & watering pipe, wiremesh, charcoal dust and common salt earth lead protection pipe upto 7.5 metre shall deemed to be included in the quoted rate.

Taking down fan of any size and any make, sealing cable end, dismantling the fan blade and removing fan and blade to store complete all as specified and as directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

Supply & fixing new energy saving ceiling fan 1200 mm sweep single phase 230 V, 50 Hz with double ball bearing in opal white colour and BEE 5 star rated BLDC type complete including provision of 3 core copper wire of size 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paintcomplete all as specified and as directed.

Supply & fixing new exhaust fan PVC body 10" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Dua Construction

Raut Construction

M/s Prakash R. Verma