Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹14.3 L
EMD Value
₹17,900
Closing Date
16 Oct 2026, 5:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Vijayapura Urban Development Authority
Prasanna Herur
Development of The Walking Track & Compound Wall & Installation of Mini Mast in Advocate colony Neharu Nagar Park at R.S.No.472/B, Mahalbagayat Village of Vijayapura.
VUDA/2026-27/BD/WORK_INDENT87
VUDA/2026-27/BD/WORK_INDENT87
Reserved
Buildings
Two Tender Document System(Two Cover)
VUDA Commissioner Office Vijayapura
7 documents required · 7 mandatory
Satisfactorily completed, as prime contractor, at least any one construction work value not less than Rs.4.275 Lakhs.
KPWD Contractor Registration Certificate
Reserved Category Certificate of Scheduled Caste.
Self attested bid capicity letter
Should attached Turnover certificate from CA with audit Report and valid UDIN No. to be furnished along with necessary documents last five years i.e., 2021-22 to 2025-26.
Works on hand and existing commitments
Upload all necessary Documents are as per tender documents.
₹500
₹17,900
1 Oct 2026
1 Oct 2026
19 Oct 2026
9 Oct 2026
Development of The Walking Track & Compound Wall & Installation of Mini Mast in Advocate colony Neharu Nagar Park at R.S.No.472/B, Mahalbagayat Village of Vijayapura.
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing, laying, spreading andcompacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMCin mechanical mix plant carriage ofmixed Material b...
Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3
fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Formwork for Foundation, Sub structure(BGM PWD SR 2023-24 V II as per corrigendum 3 sr no. 1.B all other types) 3% on finish rate of Concrete per cum
Formwork for Columns (BGM PWD SR 2023-24 V II as per corrigendum 3 sr no. 8) 70% on finish rate of Concrete per cum
Formwork for Plinth Beams (BGM PWD SR 2023-24 V II as per corrigendum 3 sr no. 1.A ) 50% on finish rate of Concrete per cum
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in allshapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) incl...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Supplying and Fixing in position RCC benches (market Rate )
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Development of The Walking Track & Compound Wall & Installation of Mini Mast in Advocate colony Neharu Nagar Park at R.S.No.472/B, Mahalbagayat Village of Vijayapura.
Fabricating, supplying and erection of 9mtr long hot dip Galvanized Conical Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including ...
Supplying, and fixing of Hotdip Galvanized M.S.Bracket suitable for outdoor luminaries and mountedon Octagonal pole using necessary bolts, nuts etc., complete. (PWD Ele 2023-24, P.No.13, I.No.4.6.5, V...
Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (PWD Ele 2023-24, P.No.56, I.N...
Supply of LED Floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. (PWD Ele 2023-24, P.No.21, I.No.5.47, V-6)
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm (PWD Ele 2023-24, P.No.52 of 81, I.No.21.05,...
Medium Duty GI pipe of 50mm dia (PWD Ele 2023-24, P.No.127, I.No.11.2.6, V-5)
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cut outs and other equipment's on the meter board using 40mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit. The pit should...
upplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. - 63Amps (PWD Ele 2023-24, P.No.14, I.No.5.7.3, V-6)
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS 13947. 60Amps ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C. (PWD Ele 2023-24, P.No.19, I.No.5.38, V-6)
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. - 1.5 sqmm (PWD Ele 2019-20 P.No.43, I.No.6.17.1)
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
K W 1 -INDENT87.pdf
Tender Document • 1.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .