KMC/NBG/LTG/CRM/e-17/25-26

TOTAL

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supply, fitting fixing S.S. 304 grade circular duct made of 3 mm thickness plate, 500 mm dia. having both end circular flange welded 50 mm widt x 6 mm thickness with mounting drill holes 13 mm dia. drill holes as per direction of Engineering-in-charge.

Supply and fixing S.S. 304 grade 90° Bend duct made of 500 mm dia. having both end circular flange welded 50 mm width x 6 mm thickness with mounting 13 mm dia. drill holes as per direction of Engineering-in-charge.

MANUFACTURE,SUPPLY, DELIVERY AT SITE , INSTALLATION &COMMISSIONING 2 NOS. DOUBLE CASE DROPLET SEPARATORS/ STAINERS(700MMX700MMX300MM) WITH ALLIED ACCESSORIES IN EXISTING MIST ELIMINATOR COMPLETE IN ALL RESPECT AS PER DIRECTION OF EIC.

REWINDING OF 40 HP MOTOR WITH COPPER COILS, INSULATING PAPER ETC. COMPLETE IN ALL RESPECT INCLUDING VARNISING AS PER THE DIRECTION OF EIC.

Supply, delivery, installation of KDS three phase 3 HP(2.2 kW) 'SP' self priming pumpset Kirloskar Brother made Pump Model Suction and Delivery Size : 50 x 50

UDMA.ELECTRIC-MECH.WOR K(VOL-1)OCT18 42-E/21/a.. .V... GROOVED PULLY (C.I): Supply and fixing the 3way C.I ...V... grooved pulley with complete mechanism key way suitable to EN-24, 50 mm dia of shaft end. a) blower driving (375 mm dia)

PWD.BLDG SCHEDULE_WEF 01.11.201740-1(C).B. 39 BUILDING WORKS ( C ) Brickworks,Concrete Works etc.39...Extra for high scaffolding in water tank for repairing, painting etc.NOTE : Height of the bottom of the tank not less than 15 mtrs.

UDMA.ELECTR IC-MECH.WORK(VOL-1)OCT1 44-E/38 Supply and fixing of palmer Block (SNH520TS) for 40 HP I.D. Fan/Blower (specially for APC devices of Wooden Pyres)

UDMA.ELECTR IC-MECH.WOR K(VOL-1)OCT18 44- E/39Supply and fixing of Adapter Sleeve with oil groove(H320/PC) for 40 HP I.D. Fan/Blower (specially for APC devices of Wooden Pyres)

UDMA.ELECTR IC-MECH.WOR K(VOL-1)OCT1 8 44- E/40 Supply and fixing of Locating Ring(FRB 12/180) for 40 HP I.D. Fan/Blower (specially for APC devices of Wooden Pyres)

UDMA.ELECTR IC-MECH.WOR K(VOL-1)OCT1 8 17- B/26/i Supply and delivery of the following bearing (Make: SKF):22312E/C3

UDMA.ELECTR IC-MECH.WOR K(VOL-1)OCT1 8 17- B/25/j Supply and fixing of tough ...V... belts (Make: FENNER/POWER BOOM / V guard/Benq/ECODRIVE) of the following size:C-144

PWD.SANITAR Y AND PLUMBING 2017 2-A.(A)-(II) 1. A. (e)(ii) PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 1. Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (e) (ii) 50 mm dia. medium quality

PWD.SANITARY AND PLUMBING 2017 4-4.(i) PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 4. Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21kg per sq. cm.). (i) 100 mm dia

PWD Plumbing Schedule 2017/Item No.5 (i), (iv), (v)/Page No.5 Supplying fitting and fixing gunmetal approved brand and make tested to 21 kg./sq.cm (for water line only) c) 50 mm dia.

PWD Bldg. Schedule 2017/Item No.36(b)/Page-42 Laying of Cable upto 3/4 core 25 sq. mm. on wall/surface incl. S&F MS saddle with earthing attachment in 10 SWG Gi(HOT Dip) wire . Making holes etc as necy., mending good damages and painting

PWD Electrical Schedule /F-5/SI No.-8(b)(xv) Finishing of the XLPE/PVC insulated armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels Make), tapes, anticorrossive paste & Jointing materials : 3.5 core 35 sq mm cable

PWD.BLDG SCHEDULE_W EF 01.11.2017279-1 (T) - B -12 BUILDING WORKS. (T)MISCELLANEOUS WORKS: B. MAINTENANCE WORKS : 12)CIeaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including cutting, loading, unloading to and from truck or cart by Mathor labour & removing the same to any distance.

UDMA SCHDUL 2018-19/SI.No.1(b)/3/B-1 Supply of 1.1 KV Grade PVC insulated armared Conductor of 35mm dia. 4 core cables (make : Polycab/GIoster/HaveIIs/Finolex)

PWD ELECTRICAL SCHEDULE 2017 Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection L&T FP 160A

UDMA SCHDUL 2018-19/SI.No.1(b)/3/B-1 supply and fixing of 240/230 volt,50Hz,T.P., power contactor(make: L&T/ABB/Schneider/siemence/GE)having contact blockof the following range-g)50-85Amp

Please Enable Macros to View BoQ information