Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.8 L
Closing Date
9 Sept 2026, 1:30 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SR DEN4
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
BID CAPACITY: Bid capacity will be evaluated for the works having an advertised value of more than 10 crores and all details required as per Annx-VI of IRGCC-2022 as amended from time to time to be submitted.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- Construction of Building.
39 conditions · 10 needing a document upload
If a tender is accepted on the quoted rates of bidder which is below the advertised tender value, an additional performance security shall be submitted by the bidder as below: Bid quoted in % of Advertised Cost Additional Performance Guarantee (%) Below 0% to 5% (Inclusive) - NIL Below 5% - 5%
If the Earnest money is deposited by the bidder is in the shape of Bank Guarantee, it should be supported by proper stamp duty, rates as prescribed in section 13 & 24 of the UP-Stamp Act 2008 and amended from time to time at the time of submission of Bank Guarantee
Please submit bank details of the firm / individual/ JV / partnership etc. i.e.Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, PAN Number and other necessary & relevant documents.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please furnish documents in support of your claim to fulfill the eligibility criteria as mentioned in the tender documents. Each page of the copy of documents / certificates in support of credentials, submitted by the you, shall be self-attested / digitally signed by the you or authorized representative of the your firm. Only those documents which are declared explicitly by you as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating the offer or otherwise available in the offer.
Please furnish statement of deviations from tender conditions, if any.
Requisite documents proving technical eligibility criteria and financial eligibility criteria has been uploaded along with those required as per explanation given in clause 10 of IRGCC-2022 (Works Matter).
Tenderers who is/are not borne on the approved list of the contractors of North Central Railway shall submit along with his/their tender as per clause 11 of IRGCC-2022 (Works Matter), as applicable.
All requisite valid documents regarding constitution of business of the bidding firm should be submitted along with the tender as per clause 14 of IRGCC-2022 (Works Matter),otherwise their offer will be considered incomplete and shall not be considered.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. Reference: para 15 of IRGCC-2022 (Works matter),otherwise their offer will be considered incomplete and shall not be considered.
Joint Venture firms, if applicable in the instant tender, should submit all valid requisite documents and fulfil the stipulations as per clause 17 of IRGCC-2022 (Works Matter),otherwise their offer will be considered incomplete and shall not be considered.
Partnership firms, if bidding for the instant tender, should submit all valid requisite documents and fulfil the stipulations as per clause 18 of IRGCC-2022 (Works Matter),otherwise their offer will be considered incomplete and shall not be considered.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority. If any Tax/Royalty/Octori is quoted extra, the same will neither be considered for evaluation of the tender nor will be paid. However any changes in rate of taxes or any new tax /cess on Works Contract will be dealt according to clause 37 of IRGCC-2022 (Works Matter).
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
The tenderer for carrying any construction work in Uttar Pradesh must get themselves registered from the registering Officer under Section - 7 of the Building and Other Construction Workers Act, 1996 and rules made there-to by the Uttar Pradesh Govt. and submit certificate of Registration (Labour Department). For enactment of this Act, the tenderer shall be required to pay cess @ 1% of cost of construction work to be deducted from each bill.
The contractor(s) shall observe all the formalities, perform all the acts and abide by all the provisions contained in the Contract Labour Act-1970 and Contract Labour Central Rules, 1971 which in addition to other stipulations provides that the contractor(s) shall obtain license(s) from appropriate licensing officer of the area before commencement of the work and shall produce a copy thereof along with the original to the Railway office, which will be returned to the contractor after verification.
If any complaint is received against the contractor regarding violation of contract laws, (exposing Principal Employer to the risk of legal proceedings under labour laws), the guilty contractor will be black listed and their contract shall be terminated following the due procedure, apart from initiating criminal proceedings against him with the help of Labour department officials. (Authority: RB letter no.2008/E (LI)/AT/CNR/3, dated 24.01.2018).
It is the responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRGCC-2022 (works matter) is for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tenderer should quote accordingly.
Though no minimum eligibility criteria is specified for tenders below Rs. 50.00 Lakhs, tenderers are advised to upload documents so that their financial capacity, capability & past performance to undertake the tendered work can be adjudged during evaluation of their offer. Documents testifying tenderer previous experience for the type of job for which tender is invited with list of works carried out in the past and financial status should be produced along with the tender.
The provision of Construction and Demolition Waste Management Rule 2016 issued by Ministry of Environment Forest and Climate Change dated 29.03.2016 and published in the Gazette of India, Part - II, Section -3, Sub-section (ii) are binding upon the Contractor. Contractor shall implement these provisions at worksites, for which no extra payment will be payable.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-A. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid.
It is to be noted that tenderer digital signature on the E-Tender form will be considered as confirmation that tenderer have read and accepted all the conditions laid down in the documents as well as related specification of items,schedule & quantity of items in the tender, consisting of techno-commercial offer form (including special conditions attached to E-Tender) and Financial offer form, unless specific deviation is quoted in the techno- commercial offer form.
The quantities shown in the attached Schedule are given as a guide and are approximate only and are as a guide to give the tenderer(s) an idea of quantum of work involved. Quantities are subject to variation according to the needs of the Railway. The Railway does not guarantee work under each item of the Schedule. The Railway reserves the right to increase/ decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of upto two years. In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Earnest Money Deposit (EMD), Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto two years.
The tenderer has to submit necessary documents in compliance of clause 10 to 18 (Part-I) of IRGCC 2022 (Works matter) mandatorily, otherwise offer will be considered as Incomplete Offer and accordingly shall not be considered.
Present tendered work is the composite work where Part A comprises of CIVIL ENGINEERING WORKS & Part B Comprises of ELECTRICAL ENGINEERING WORKS.
UDIN mandatory w.e.f., 1st Feb., 2019 for all Certificates: - It has been noticed that financial documents/ certificates attested by third person misrepresenting themselves as CA Members are misleading the Authorities and Stakeholders. ICAI is also receiving number of complaints of signatures of CAs being forged by non CAs. To curb the malpractices, the Professional Development Committee of ICAI has implemented in phased manner an innovative concept of UDIN i.e. Unique Document Identification Number. All Certificates are being made mandatory with effect from 1st February, 2019 as per the Council decision taken at its 379th Meeting held on 17th - 18th December, 2018.
Balance sheet for the 4th previous year (i.e., FY 2022-23 or as applicable for the instance tender) as per para 10.2 of GCC-2022 and para 4.15.2 of the tender document shall be considered in evaluation of financial eligibility criteria only when it is clearly certified in Annex-VI B or a self-declared certificate duly signed by chartered accountant and the tenderer that the balance sheet of last financial year (i.e., FY 2025-26 or as applicable for the instance tender) has not been audited/yet to be prepared.
Composite Tender for Construction of 20 bedded RPF barrack at BRN station under Sr. ADEN/TDL
6620262027-145~NCR
6620262027-145
Open
Works - General
8 Months
Prayagraj, Uttar Pradesh
₹0
₹2.8 L
18 Aug 2026
18 Aug 2026
26 Aug 2026
180 items across 5 schedules · ₹17,05,183.49 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 400 | 260.3 | 1,04,120 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 400 | 196 | 78,400 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 150 | 700.5 | 1,05,075 |
| 4 | All kinds of soil | cum | 50 | 126.8 | 6,340 |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 50 | 2,123.75 | 1,06,187.5 |
| 6 | All kinds of soil | Sqm | 200 | 34.15 | 6,830 |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 10 | 7,878.5 | 78,785 |
| 8 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 10 | 7,294.7 | 72,947 |
| 9 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 30 | 7,178.75 | 2,15,362.5 |
| 10 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm | 25 | 410.85 | 10,271.25 |
| 11 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 5 | 9,045.75 | 45,228.75 |
| 12 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 5 | 10,852.95 | 54,264.75 |
| 13 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 250 | 392.15 | 98,037.5 |
| 14 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 400 | 927.25 | 3,70,900 |
| 15 | Shelves (Cast in situ) | Sqm | 10 | 927.25 | 9,272.5 |
| 16 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 65 | 736.4 | 47,866 |
| 17 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 200 | 961.3 | 1,92,260 |
| 18 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 30 | 951.1 | 28,533 |
| 19 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 10400 | 107.85 | 11,21,640 |
| 20 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 9600 | 107.85 | 10,35,360 |
| 21 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. | Metre | 30 | 78.4 | 2,352 |
| 22 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 130 | 9,504.75 | 12,35,617.5 |
| 23 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 120 | 9,860.4 | 11,83,248 |
| 24 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 80 | 733.5 | 58,680 |
| 25 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 70 | 7,132.25 | 4,99,257.5 |
| 26 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 150 | 9,105.95 | 13,65,892.5 |
| 27 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 60 | 1,123.8 | 67,428 |
| 28 | Area of slab upto 0.50 sqm | Sqm | 5 | 5,413.5 | 27,067.5 |
| 29 | Area of slab over 0.50 sqm | Sqm | 5 | 5,136.3 | 25,681.5 |
| 30 | Each | 4 | 978.7 | 3,914.8 | |
| 31 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 50 | 1,267.95 | 63,397.5 |
| 32 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). | Sqm | 20 | 2,600.45 | 52,009 |
| 33 | Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). | Sqm | 20 | 176.4 | 3,528 |
| 34 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 10 | 3,167.95 | 31,679.5 |
| 35 | 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws | Sqm | 10 | 2,819.25 | 28,192.5 |
| 36 | 100x70x4 mm (ordinary type) | Each | 30 | 148.25 | 4,447.5 |
| 37 | 200x10 mm | Each | 13 | 358.4 | 4,659.2 |
| 38 | 300x16x5 mm | Each | 6 | 322.2 | 1,933.2 |
| 39 | 125 mm | Each | 10 | 256.65 | 2,566.5 |
| 40 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 10 | 121.65 | 1,216.5 |
| 41 | Providing and fixing factory made door frame (single rebate) made out of solid foam PVC extruded profile of minimum 60 mm width and minimum 30 mm thickness, having homogenous fine cellular structure and integral smooth outer skin. The frame's vertical and horizontal members to be mitered cut and joined together with PVC solvent adhesive / cement and both corners strengthened with fully threaded steel screws (of required size) fixed diagonally. The door frame is to be fixed to door jambs using 6 Nos. SS 304 grade minimum 8 mm dia CSK Phillips stainless steel self tapping screws/fasteners with PA6 grade polyamide sleeves both of required size, and gap if any between the door frame and the jamb must be filled with clear silicon, complete as per direction of the Engineer-in-Charge. | Metre | 30 | 696 | 20,880 |
| 42 | 5 mm thick solid foam PVC panel of required size with moulded/ extruded beading of appropriate design shape and size as per manufacturer's specifications ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Decorative type. | Sqm | 12 | 4,138.35 | 49,660.2 |
| 43 | Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m) | Sqm | 35 | 10,874.2 | 3,80,597 |
| 44 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 300 | 133.7 | 40,110 |
| 45 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Kg | 150 | 141.7 | 21,255 |
| 46 | Hot finished welded type tubes | Kg | 306 | 194.4 | 59,486.4 |
| 47 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. | Each | 20 | 220.65 | 4,413 |
| 48 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 250 | 172.6 | 43,150 |
| 49 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 235 | 772.4 | 1,81,514 |
| 50 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 50 | 614.2 | 30,710 |
| 51 | 25 mm thick | Sqm | 100 | 1,948.25 | 1,94,825 |
| 52 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | Sqm | 20 | 2,354.7 | 47,094 |
| 53 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 50 | 1,096.55 | 54,827.5 |
| 54 | Size of Tile 600x600 mm | Sqm | 150 | 1,553.45 | 2,33,017.5 |
| 55 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 20 | 4,481.3 | 89,626 |
| 56 | 110 mm diameter | Metre | 50 | 377.4 | 18,870 |
| 57 | 110 mm bend | Each | 10 | 150.35 | 1,503.5 |
| 58 | 110 mm Shoe | Each | 10 | 131.85 | 1,318.5 |
| 59 | 110 mm | Each | 20 | 371.3 | 7,426 |
| 60 | Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. | Each | 10 | 84.55 | 845.5 |
| 61 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 50 | 738.65 | 36,932.5 |
| 62 | Ridges plain (500 - 600mm) | Metre | 20 | 532.35 | 10,647 |
| 63 | 1:6 (1 cement: 6 coarse sand) | Sqm | 1150 | 343.65 | 3,95,197.5 |
| 64 | 1:4 (1 cement: 4 coarse sand) | Sqm | 200 | 411.75 | 82,350 |
| 65 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 800 | 262.7 | 2,10,160 |
| 66 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 800 | 185.65 | 1,48,520 |
| 67 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 320 | 116.9 | 37,408 |
| 68 | Two or more coats on new work | Sqm | 80 | 155.9 | 12,472 |
| 69 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 30 | 263.95 | 7,918.5 |
| 70 | 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. | Sqm | 60 | 1,091.5 | 65,490 |
| 71 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 2 | 6,767.4 | 13,534.8 |
| 72 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 2 | 6,515.55 | 13,031.1 |
| 73 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 2 | 6,258.75 | 12,517.5 |
| 74 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 4 | 1,879.2 | 7,516.8 |
| 75 | 510x1040 mm bowl depth 250 mm | Each | 1 | 6,945.6 | 6,945.6 |
| 76 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 4 | 1,607.95 | 6,431.8 |
| 77 | Rectangular shape 1500x450 mm | Each | 4 | 2,093 | 8,372 |
| 78 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 20 | 1,151.9 | 23,038 |
| 79 | Sand cast iron S&S as per IS - 1729 | Each | 2 | 470.45 | 940.9 |
| 80 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 6 | 168.35 | 1,010.1 |
| 81 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | Each | 2 | 231.95 | 463.9 |
| 82 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 4 | 708.95 | 2,835.8 |
| 83 | 15 mm dia nominal bore | Metre | 200 | 366.4 | 73,280 |
| 84 | 25 mm dia nominal bore | Metre | 10 | 551.7 | 5,517 |
| 85 | 50 mm dia nominal bore | Metre | 20 | 762.15 | 15,243 |
| 86 | 80 mm dia nominal bore | Metre | 20 | 1,041.7 | 20,834 |
| 87 | 50 mm nominal bore | Each | 2 | 1,026.65 | 2,053.3 |
| 88 | 80 mm nominal bore | Each | 2 | 2,604.55 | 5,209.1 |
| 89 | 15 mm nominal bore | Each | 12 | 97.75 | 1,173 |
| 90 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 2000 | 11 | 22,000 |
| 91 | 15 mm nominal bore | Each | 10 | 506.8 | 5,068 |
| 92 | 15 mm nominal bore | Each | 10 | 798.95 | 7,989.5 |
| 93 | 15mm nominal bore | Each | 12 | 574.3 | 6,891.6 |
| 94 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. | Each | 5 | 74.8 | 374 |
| 95 | 300 mm dia. R.C.C. pipe | Metre | 50 | 994.3 | 49,715 |
| 96 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 2 | 12,770.55 | 25,541.1 |
| 97 | 150 mm dia | Each | 2 | 602.65 | 1,205.3 |
| 98 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | cum | 10 | 8,042.3 | 80,423 |
| 99 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self- priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in- Charge. | Sqm | 450 | 563.1 | 2,53,395 |
| 100 | 300 mm dia | Metre | 90 | 707.75 | 63,697.5 |
| 101 | 300 mm dia | Metre | 20 | 825.7 | 16,514 |
| 102 | 200 mm nominal size dia | Metre | 90 | 1,113.35 | 1,00,201.5 |
| 103 | 200 mm nominal size dia | Metre | 20 | 1,255.7 | 25,114 |
| 104 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | cum | 10 | 1,509.8 | 15,098 |
| 105 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | cum | 10 | 1,538.25 | 15,382.5 |
| 106 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge. | cum | 10 | 1,538.25 | 15,382.5 |
| 107 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. | cum | 100 | 2,024.5 | 2,02,450 |
| 108 | 200 mm dia | Each | 1 | 357.6 | 357.6 |
| 109 | Frame size 50 x 125 mm | Metre | 35 | 1,075.7 | 37,649.5 |
| 110 | 30 mm thick | Sqm | 33 | 4,764.2 | 1,57,218.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
IRSOD2022.pdf
ATTACHMENT
PCECirc103.pdf
ATTACHMENT
Letterfore-BG.pdf
ATTACHMENT
TD145Composite.pdf
ATTACHMENT
IRGCC2022ACS11.pdf
ATTACHMENT
IRGCC2022ACS09.pdf
ATTACHMENT
IRGCC2022ACS10.pdf
ATTACHMENT
IRGCC2022ACS07.pdf
ATTACHMENT
IRGCC2022ACS08.pdf
ATTACHMENT
IRGCC2022Revised.pdf
ATTACHMENT
ACS6-GCC2022.pdf
ATTACHMENT
ACS1-GCC2022.pdf
ATTACHMENT
IRGCC2022ACS02.pdf
ATTACHMENT
IRGCC2022ACS03.pdf
ATTACHMENT
IRGCC2022ACS05.pdf
ATTACHMENT
IRGCC2022ACS04.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].