Construction of Community hall at Sagolband

Amount

Sub-Head:- Earth Work

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift up to 1.5m. including getting out the excavated soil as directed within a lead of 50 m.a) Hard/ Dense soil.

Filling available excavated earth (excluding rock) in trenches, plinth sides of ,foundation etc. in layer not exceeding 20cm. in depth consolidation each deposited layer by ramming and watering lead unto 50m. lift unto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete.

Sub-Head:- Concrete & RCC Work

Providing and laying cement concrete in foundation and plinth excluding the cost of ,centering and shuttering in1:4:8 (1cement : 4c/sand: 8 graded stone agro. 40 mm nominal size.)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :t in 1:1.5:3 ( 1 cement :1.5 c/sand: 3 graded stone agro. 20 mm nominal size.)

Reinforced cement concrete work in walls ( any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :t in 1:1.5:3( 1 cement :1.5 course sand: 3graded stone aggrt. 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with a) 1:1.5:3 (1 cement: 1.5 course sand: 3 graded stone aggt. 20mm nominal size).

Sub-Head:- Reinforcement

Reinforcement for RCC work in bending, binding and placing in position complete in Tor steel bars.

Sub-Head:- Form-Work

Providing form works i/c centering and shuttering so as to give a rough finish, shuttering & propping etc height of propping & centering below supporting floor to ceiling not exceeding 4m & removal of the same for in-situ reinforced concrete plain concrete work in:-

a) Foundation footings, bases of column etc. and mass concrete

b) Column pillar posts& struts ( square, rectangular or polygonal in plain)

c) Sides and soffits of beam, beam haunchings, cantilevers, girders, bressumers and lintel not exceeding 1m in depth.

Sub-Head: Brick Work

2nd class (local 1st class) brick work in foundn and plinth in cement mortar 1:3(1cement :3c/sand)

Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 ( 1 cement :3 c/sand) in superstructure.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position A)local best quality Uningthou

P/F 35 mm thick panelled and glazed or panelled or glazed shutters for cupboard i/c black-enamelled or bright finished M.S. butt hinges with necessary screws. Uningthou wood.

P/F M.S. grills of reqd pattern to wooden frames etc. with M.S. flats at reqd spacing and framed all round bars with round headed bolts and nuts or by screws ornamental grill

P/F M.S. sliding bolts with nuts and screws etc. complete with 300 x 16mm.

P/F M.S. handles with necessary screws etc. complete.

P/F M.S. hooks and eyes with 30cm.

P/L M.S. fan clamps Type-I of 16mm dia bent to shape during laying i/c hooked ends in R.C.C. slab during laying i/c painting the exposed portion of loop all per standard design complete.

Sub Head: Flooring& Finishes

75 mm cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

20 mm thick cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1 cement:3 coarse sand ) finished with a floating coat of neat cement i/c. rounding of junctions with floors.

12 mm cement plaster 1:3 (1 cement: 3 fine sand)

15 mm cement plaster 1:3 (1 cement : 3course sand) finished with a floating coat of neat cement.

Applying one coat of cement pimer of approved quality on wall surface.

Finishing wall with water proofing cement paint of approved quality on new work( Three or more coats) to give an even shade.

Distempering ( two or more coats) with oil bound washable distemper of appd. quality on new work including priming coat to give an even shade.

Painting (one or more coats) with black japan to give an even shade.

Painting of two coats with oil bound wood preservative quality on new work.

Providing and fixing on wall face G.I. Rain water pipe and filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cem : 2 fine sand). c) 150 mm diameter.

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2079) welded and bolted including special shape washer etc. complete. (a) Electric resistant welded tube (Conforming to IS:1611-1979)

Corrugated G.I. Sheet 24 B.G. fixed with galvanized iron J or L hooks 8 mm dia G.I. Limpet and bitumen washer complete excluding the cost of purlins, rafter and trusses.

Ridges or hips 600 mm over all in plain G.I. Sheet 24 B.G. fixed with galvanized iron J or L hooks 8 mm dia G.I. Limpet and bitumen washers complete.

Providing wood work in frame of false ceiling, partation etc b)Uningthou wood-Railing

Providing and fixing 20 mm plank as eave board with :b) Uningthou wood

Wiring for light pt./power plug with 2x4mm2 FRLS PVC insulation copper conductor single core cable in surface/recessed medium class steel conduict along with 1 no. 4mm2 PVC insulated copper conductor single core cable for loop earthing etc as reqd

Wiring for circuit/ sub main wiring along with earth wire (the following sizes) of FRLS PVC insulation in surface/ recess mediul class steel conduit etc as reqd.

1. 2x1.5 mm2+1x1.5mm2 earth wire

2. 2x2.5mm2+1x2.5mm2 earth wire

3. 2x4mm2+1x4mm2 earth wire

S/F bulk head fitting suitable foe 100 W lamp complete with all acccessaries i/c connection as reqd.

S/F brass battern/angle holder i/c connection

Supply of 48" sweep (1200mm) AC ceiling fan (Make Bajaj/Usha or Crompton)

S/F 12" (305 mm) dia light duty exhaust fan complete with all acccessories (Usha /Bajaj/Orient) etc.

S/F 8 way, (4+24 way) single door TPN prewired, sheet MCB distribution board, 415V on surface /recessd complete with loose wire box, terminal connection of all incomming and outgoing circuit duly previewd with suitable size FRLS PVC insulatede copper conductor up to terminal block, tinned copper bus bar, neutral link, earth bar,din bar, detachable gland plate, interconnection power painted i/c earthing etc as reqd (but without MCB / RCCB / Isolator).

P/F 4 pole 160 Amp. MCCB of break back capacity 25 KA in the existing cubical panel board i/c drilling holes in the cubical panel and making connection as reqd.

S/F 8 way, (2+8 way) single door pole & neutral, prewired,sheet steel MCB distribution board, 240V on surface/recessd complete with loose wire box, terminal block, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnection i/c power painted (but without MCB / RCCB / Isolator) earthing etc as reqd.

S/F (Following rating) double pole 240V isolator in the existing MCB DB complete with connection, testing & commission as reqd.

S/F 5-32 amp rating 230 V'C' curves MCB for inductive load of the following poles in the existing MCB DB complete with connection, testing & commission as reqd.

a. Single pole

S/F ( following piano type switch socket) on the existing switch box/cover i/c connection as reqd.

1. 5/6 amp switch

2. 3pin5/6 amp socket outlet

3. 15/16 amp switch

4. 6 pin 15/16 amp socket outlet

S/F Stepped type electronic regulator on the modular plate switch box i/c connetion but excluding modular plate as per reqd.

Supply anfd fixing Pre coated electronic box type luminaries with decorative and caps FTL 1x36/40 lamp complete with accessories i/c connection etc as reqd

S/F 12W LED Bulb.

15w LED downlighter

Earthing with copper earth plate 600mm x 600mm x 6mm thick i/c accessories and providing masonaries enclosure and watering pipe etc with charcoal or coke and salt) as reqd.

P/L earth connection from earth electrode with 4mm dia copper wire in 15mm dia GI pipe as reqd.

P/F 4mm dia copper wire on surface or in recessed for loop earthing as reqd.

P/F 200 amp TPN stand ground on load change over switch (compact design) 415/500 V including connection etc as required.

M/s Khumukcham Constructions