Renovation of Museum, Aquarium and R/NR Buildings at Beas Dam

Amount

Stripping and stacking iron sheets of a roof including ridging, flashing, eaves boards gutter sand down pipes.(CSR-8.11)

Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.60 mm (+ 0.05 %) thick(CSR-13.27)(iii)b

Providing and fixing Gutter 250mm wide with PPGL 0.50 thick (TCT) manufactured from zinc / aluminium alloy coated high tensile steel, having minimum yield strength of 550 MPa of approved colour fixed by means of self-drilling screws limped washers as per the manufactures guidelines complete in all respect and to the entire satisfaction of engineer in charge. (CSR-13.27)(iv)

Nicking cement concrete surface (over 28days old including preparation and laying Slurry CSR 10.31

Providing and laying vitrified floor tiles indifferent sizes in light colour shades made usingFull Body Technology (thickness to be specifiedby the manufacturer) with water absorption’s lessthan 0.08% and conforming to IS : 15622 ofapproved make in all colours and shades, laid on20mm thick cement mortar 1:4 (1 cement: 4 finesand), complete. ( Full body vitrified tiles havepigment in entire body / thickness of tile whichmakes chips and scratches less noticeable andmakena ideal choice for high traffic zones.) Size 600x600 mm(CSR-14.115)

Removing Doors and Windows (Steel or wood)withchowkhats by making recesses in wallswhen the wall is not to be dismantled. Doors of area 3 sqm and below.(CSR-8.26a)

Removing Doors and Windows (Steel or wood)withchowkhats by making recesses in wallswhen the wall is not to be dismantled. Windows of area 3 sqm and below(CSR-8.26b)

Providing and fixing aluminum work for doors, windows, ventilators and partitionswith extruded built up standard tubularsections/appropriate z sections and othersections conforming to Is: 733 and IS :1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer inCharge , fixed with rawl plugs and screws or with fixing clips, or with expansion holdfasteners including necessary filling up ofgaps at junctions, at top, bottom and sideswith required PVC Plug/neoprene felt etc.aluminum sections shall be smooth, rustfree, straight, mitered and jointed mechanically wherever required includingcleat angle, aluminum snap beading forglazing/paneling, C.P.brass/stainless steelscrews, all complete as per architecturaldrawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paidfor separately) : For fixed portion and chawkhats(CSR-17.45a)

Providing and fixing aluminum work fordoors, windows, ventilators and partitionswith extruded built up standard tubularsections/appropriate z sections and othersections conforming to Is: 733 and IS :1285 of Jindal, Hindalco, Mahavir orequivalent make approved by Engineer inCharge , fixed with rawl plugs and screws or with fixing clips, or with expansion holdfasteners including necessary filling up ofgaps at junctions, at top, bottom and sideswith required PVC Plug/neoprene felt etc.aluminum sections shall be smooth, rustfree, straight, mitered and jointedmechanically wherever required includingcleat angle, aluminum snap beading forglazing/paneling, C.P.brass/stainless steelscrews, all complete as per architecturaldrawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paidfor separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour forfixing of fittings wherever requiredincluding the cost of PVC Plug /neoprene gasket required.(CSR-17.45b)

Providing and fixing glazing in aluminumdoor, window, ventilator shutters andpartitions etc. with PVC Plug/ neoprenegasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness.(CSR-17.47i)

Scraping White wash and colour wash.(CSR-8.31a)

Preparation of plastered surfaces fordistempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti includingfinishing the surface to the required finish complete.(CSR-16.6)

Distempering with acrylic washable oil bound distemper (of approved manufactured) one coat over one priming coat on old distempered surface.(CSR-16.11)

Finishing walls with textured exterior paint ofrequired shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm(CSR-16.58)

Applying pink primer or aluminum primingcoat on wood work including preparation ofsurface knotting and stopping etc.(CSR-16.16)

Painting two or more coats excluding primingcoat with synthetic enamel paint in all shadeson wood work, metallic or plastered, concrete surface to give an even shade.(CSR-16.17)

Earth work in excavation of foundations of bridges culverts, buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around:- For semi-conglomerate soil of the nature of pick jumper work.(CSR-6.7b)

Cement concrete 1:6:12With brick ballast 40mm gaugemixing by mechanical means using concrete mixer volumetric type.(CSR-10.8 a ii)

First class burnt brick laid in cement sandmortar 1:6 in foundation and plinth.(CSR-11.3i)

Damp proof course 2.5cm thick of cementconcrete 1:2:4 with 2 coats of bitumen 20/30penetration at 1.65 Kg per sqm laid hot and sanded.(CSR-10.28)

First class burnt brick work laid in cement sand mortar 1:4 in first storeyupto 4 metres above plinth level.(CSR-11.8)

10mm thick Cement Plaster 1:4(CSR-15.6)

Applying priming coat with metal primer onnew steel or iron work including preparation of surface.(CSR-16.20)

Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work(CSR-16.21)

Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects.(CSR-18.30)

Providing & Fixing of 10 gauge welded mesh of 25mm x 25mm size fixed on steel glazing with MS flat 20mm x 6mm beeding complete in all respect including painting two coats with Synthetic Enamel Paint and Priming Coat(CSR-18.31)

1.8 Meter High G.I. Barbed Wire Fencing 1.8 meter high G.I. barbed wire fencing with 2.4meter angle iron posts 50x50x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 12 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc.including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications(CSR-24.43 b)

Advance Direction sign board 1200x1800mm rectangular as per IRC 67- 2012 with highintensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmlyfixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 . Using high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 09 and as per IRC 67 2012(CSR-24.48d)

Providing & fixing in position UV filter havingflow rate 200 ltr/hr with 3 stage purificationprocess having 16 watt UV lamp and 35 Wattpower rating of approved make (to theapproval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.(CSR-30.28)

Wooden wall teak paneling

Polish work

Wooden teak partition

Polish work

Wooden teak sealing

Polish work

Providing and fixing mineral fibre false ceiling tiles at all heights With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre& 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as perspecifications, drawings and as per directions of the engineer-in-charge.(CSR-13.64)

Supplying and fixing rolling shutters, ofapproved make, made of 80mmx1.25mm,M.S. Laths, interlocked together throughtheir entire length and jointed together, atthe end, by end locks, mounted onspecially designed pipe shaft, withbrackets, side guides, 27.5cm long wirespring grade No. 2 and arrangement forinside and outside locking with push andpull operation complete, including topcover 0.80mm thick (payment is to bemade for the exact size of opening whererolling shutter is to be fixed)(CSR-18.11a)

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillarslaid in 12.5mm thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match theshade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.(CSR-14.88)

Dressing of earth work. Repair work.(CSR-6.3)(ii)

Earth filling under floors with surplus ordinary soil or soil containing gravel or kankarupto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.(CSR-6.8)(i)(a)

Cement concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type. (CSR-10.12)a(ii)

Providing and laying 80 mm thick factory madecement concrete interlocking Paving blocks of M-40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over andincluding 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.(CSR-14.139)

REPLACEMENT OF WIRES, COVER FRAMES,MODULAR SWITCHES, CONCEALED METALBOXES AND OTHER ACCESSORIES IN THEEXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPEACCESSORIES) Derived from 34.01:Replacement of PVC insulated copperconductor single core FR cable (ISI marked)overall 1.5sq. mm, 1100volts grade to be laidin existing heavy gauge welded conduit pipe20 mm/25 mm dia (1.6mm thick) ISI Marked,recessed in wall etc., complete with powdercoated/anodized concealed metal boxes(1.6mm thick with Brass lugs) required for suitable number of modules (Modularaccessories) for having Step type electronicfan regulators (two module) 100watts, bellpush, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR34.01)34.08 (ia) Wiring fan point (Without fan box)

Wiring light point

Wiring call-bell point

Wiring 6Amp. wall socket point

Wiring 16/20Amp. power plug control point

Wiring light point with double control switches.

PVC INSULATED FR COPPER CONDUCTOR CABLES Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitableupto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge(CSR-34.09) (ii) Overall size 1.5sq.mm (Un-sheathed)

Overall size 2.5sq.mm (Un-sheathed)

Overall size 4sq.mm (Un-sheathed)

PVC, HDPE PIPES & PVC FLEXIBLEPIPES:Supply& erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposesincluding bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- CSR-34.12 (x) Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

SHEET METAL DOUBLE DOORDISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB'sSupply and erection of sheet metalDouble Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&Ndistribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-CSR-34.17 (viii) TP&N Horizontal Double Door Distribution Board 12 way each

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-CSR-34.16 (ii) MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Four Pole 50, 63amp. (10kA, Curve-C)

Ceiling Fan

LED surface ceiling Light

Overhead sign board 12000x1500mm simply supported type double sided as per IRC 67-2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 –09 and as per IRC 67 . fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 40x40x6mm angle iron supported on designed double support system of MS pipe and plates in the form of a simply supported type truss made with 350NB pipe @50kg per mtr as vertical support, 50NB pipe @ 4.50kg per mtr and 40NB pipe @ 3.61kg per mtr for truss including base plates, gusset plates, designed RCC foundation for fixing in ground complete as per clause 802 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012. Using high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 09 and as per IRC 67 2012.(CSR-24.54)(a)

Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge) including carriage complete in all respect.Water Cooler Full Steel Body 150/150 ltr without Stablize.(CSR-30.25)(d)

Bidder Name

Amount in Words

M/S Mittal Construction Company

RATTAN BUILDERS PVT LTD

RV DIGITAL SCALES

Expertech Consultants

THE NABIPUR COOP LABOUR AND CONSTRUCTION SOCIETY LTD

M/S Mittal Construction Company

THE NABIPUR COOP LABOUR AND CONSTRUCTION SOCIETY LTD

Expertech Consultants

RATTAN BUILDERS PVT LTD