Loading
Loading…
Loading…
Tender Value
₹1.4 L
EMD Value
₹2,800
Closing Date
15 Sept 2026, 6:55 pm
Executive Engineer REW Pulwama
Executive Engineer REW Pulwama
RDDDC2627106875- FENCING AROUND PANCHAYAT GHAR MALANGPORA. BLOCK AWANTIPORA
2026_RDPR_320364_67
e- NIT No. 92/2026-27 Dated 10-08-2026
Open Tender
Civil Works
Percentage
Pulwama
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
Executive Engineer REW Pulwama
₹2,800
10 Aug 2026
10 Aug 2026
16 Sept 2026
10 Aug 2026
15 Sept 2026
10 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: -1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). | 1 | cum | - | - |
| 2 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 sand) | - | Sqm | - | - |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for:Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | - | Sqm | - | - |
| 4 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 0.6 | Kgs | - | - |
| 5 | Providing and fixing Color coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | Sqm | - | - |
| 6 | Carriage of sand by MT for avg lead of 14 kms | - | cum | - | - |
| 7 | Carriage of 40mm aggregates by MT for avg lead of 14 kms | - | cum | - | - |
| 8 | Supply and carriage of plum all complete | 1 | cum | - | - |
| 9 | Add cost of Signboard of work and photographs | - | Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
BOQ_1064878.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].