Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹71,350Accepted-Finance | 1 | Accepted-Finance The bidder has qualified as per rates quoted by him | |
| 2 | 2₹73,826+₹2,476 (3.47%)Accepted-Finance | 2 | Accepted-Finance The bidder has qualified as per rates quoted by him | |
| 3 | 3₹74,352+₹3,002 (4.21%)Accepted-Finance | 3 | Accepted-Finance The bidder has qualified as per rates quoted by him | |
| 4 | Not Admitted-Fee/PreQual/Technical/Finance | - | Not Admitted-Fee/PreQual/Technical/Finance Not qualified for AOC |
Tender Value
₹75,333
EMD Value
₹1,507
Closing Date
27 Feb 2024, 6:00 pmClosed
Executive Engineer PHE Mech. Div. South Awantipora
Executive Engineer PHE Mech. Div. South Awantipora
Providing and fitting of D.I valves and associated mechanical works at Water Supply Scheme Lethapora Pethapora under Non Plan M and R.
2024_PHE_245439_1
JSD/PHE/MDSA/ e-NIT No. 52
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
20 days
Lethapora
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Executive Engineer PHE Mech. Div. South Awantipora
₹1,507
Yes
7 May 2024
20 Feb 2024
28 Feb 2024
20 Feb 2024
27 Feb 2024
20 Feb 2024
Amount
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units. The body and bonnent of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber (Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions. It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve. The valve shall be supplied along with hand wheel. Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work. The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job. Size : DN 80 mm Rating : PN 16
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber (Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions. It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve. Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work. The job includes providing and fitting of 02 Nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job. Size : DN 80 mm Rating : PN 16
Fabrication, providing and fitting of 90-120 degree bend/elbow to be fabricated out of Class B and C GI pipe, 1 m length and flanged on both ends a to make it leak proof. The flanges shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. Size : DN 80 mm
Providing & welding of steel plate flanges of nominal pressure rating 1.6MPa as per IS 6392 with nominal sizes as under: Size : 80 mm
Providing of natural rubber gasket for flanged joints with nominal sizes as under: Size : 80mm
Providing and fitting of assorted size nuts & bolts.
Steel work in built up section for pumping unit base frame including steel primer coat.
M/S SHALIMAR ENGINEERING WORKS
Rayees Electric Engineering Works
tech_eval.pdf
fin_eval.pdf
finance_718221.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .