Loading
Loading…
Loading…
Tender Value
₹13.9 Cr
EMD Value
₹8.5 L
Closing Date
29 Jan 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
13 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: -Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or -Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or -One similar work costing not less than the amount equal to 60% of advertised value of the tender. As regards Similar Work, tenderer should have executed erection, testing, commissioning of any one of the following types of w o r k s . "Electrification/Rewiring of Service or Residential building/Yard/HT/LT substation work/HT/LT cable work/Street lighting/platform or building lighting management/circulating area lighting/Electrical overhead power supply work/Electrical pump work etc.". The work must have been carried-out in any of the following organization: - a)Central Government department or State Government department. b)Central Government PSUs or State Government PSUs". in Central / Sate Govt / Semi-Govt Organizations / Authorities, PSUs, Govt of India undertakings shall only be considered to qualify above eligibility criteria. Necessary Certificate to be submitted along with offer. . Certificates from private individuals for whom such works are executed / being executed shall not be accepted. Tenderers may carefully note that their Contract Agreement for this work is liable to be terminated at any time later, in case any of the information furnished by them is found to be untrue or any adverse point comes to light subsequently. The decision of Railway in this regard shall be final and binding. bindingNote:The Joint Venture (JV) will be applicable for this tender as JV is only applicable for tender cost more than 10 crores as per Railway Board's letter No. 2002/CE-I/CT/37/JV Pt.VIII dated 14.12.2012.
5 conditions · 4 needing a document upload
Affidavit as per attached format Annexure-V.
ANNEXURE.V(A)
Power of Attorney.
Tender Form (First Sheet)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Electrical general work for remodeling of Pune Yard of PF No. 7/8, 9/10 & 11/12 at Pune Railway station and Electrical General work of Pune division.
PA-LD-C-T-2025-16~CR
PA-LD-C-T-2025-16
Open
Works - General
12 Months
Solapur, Maharashtra
₹0
₹8.5 L
29 Jan 2026
7 Jan 2026
15 Jan 2026
549 items across 5 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 6,93,58,655.69 | ||
| — | 130.00 | — | — | ||
| Construction of switch room with electrification and equipments as per requirement | — | — | — | 28,04,418.5 | |
| — | Item Breakup for | details. | — | ||
| Supply, fabrication and erection of Outdoor type MDB with 400 amp 2 Nos MCCB 25 KA for incoming and 250 amp 25 KA 4 Nos and 125amp 4nos MCCB for outgoing as per specification. | — | — | — | 3,69,246.52 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Outdoor type LT panel - supply, erection, testing and commissioning with 250 A TPN MCCB - 2 nos. for incoming & TP MCCB 125 A - 4 nos. & 63 A -4 nos. for out going as per detail specification. | — | — | — | 2,18,546.1 | |
| — | Item Breakup for | details. | — | ||
| Supply fabrication of 8 way feeder piller with 630 amp MCCB for incoming and 315 amp HRC fuses 18 nos and 125 amp HRC fuses 6 Nos fuse for outgoing as per specification. | — | — | — | 2,28,879.8 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench/pipe) of 4 core 120 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 18,73,118 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench/pipe) of 4 core 185 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 41,08,628 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection(including cleating on walls/trusses/pole or laid in provided trench /pipe) of 4 core,300 sqmm AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 30,80,000 | |
| — | Item Breakup for | details. | — | ||
| Supply fixing of retro reflective high intensity prismatic grade sheeting as per approved colour. The matter/ Letters to be pasted shall be cut letters in reflective of approved colours. | — | — | — | 19,500 | |
| — | Item Breakup for | details. | — | ||
| Supplying and erecting 16 m (clear height) High Mast (Top-150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation asper approved specification (excluding luminaries). | — | — | — | 8,94,976.68 | |
| — | 4.00 | — | — | ||
| Making M-20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast) | — | — | — | 1,08,159.76 | |
| — | Item Breakup for | details. | — | ||
| Supplying and erecting Outdoor Stand Mounted Feeder Pillar for high mast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TPcontactor for automatic switching of luminaries, 2 no's 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming andoutgoing cables erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self-lock, gasket and slanting top erected with CC foundationcomplete. | — | — | — | 1,13,264.52 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 350 W LED flood light, Ingress protection IP 65 ,High Power LED, pressure dia-cast housing and heat sink in aluminium extrusion ,high efficiency toughened lamp cover, secondary lens optics complete, white colour as per specification | — | — | — | 19,91,484.36 | |
| — | 47.00 | — | — | ||
| Provision reinforced concrete for foundation, cable trench and baffle wall. | — | — | — | 4,05,538.56 | |
| — | 4600.00 | — | — | ||
| Making of cable trench of suitable width and required depth with excavation and back filling of excavated earth in hard soil or soil with concrete/tar layer or track crossing or road crossing portion | — | — | — | 4,39,024 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 120 mm Outer Dia DWC pipe | — | — | — | 9,78,012 | |
| — | 64.00 | — | — | ||
| Supply, erection, testing & commissioning of maintenance free & Permanent earthing. | — | — | — | 9,46,571.52 | |
| — | 20.00 | — | — | ||
| Provision of CC 1:2:4 in foundation with 25 mm graded stone along with excavation in hard soil or soil with concrete or tar layer etc. | — | — | — | 91,007.2 | |
| — | Item Breakup for | details. | — | ||
| Provision of GI strip of 25 x 3 mm size | — | — | — | 89,513.6 | |
| — | Item Breakup for | details. | — | ||
| Fabrication, supply and erection of fencing upright | — | — | — | 1,92,377.94 | |
| — | Item Breakup for | details. | — | ||
| Fabrication, supply and erection of fencing panel complete. | — | — | — | 6,35,228 | |
| — | Item Breakup for | details. | — | ||
| Fabrication, Supply and Erection of gate assembly for fencing complete. | — | — | — | 1,24,850.22 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of HT Danger Board of size 400 x300x3 mm thick indicating skull bone marked "DANGER" 11 KV HT/LT to be provided in Tri Language Marathi, English & Hindi | — | — | — | 8,213.4 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of shock treatment chart in Tri-lingual with inside plastic cover plywood back frame work complete. | — | — | — | 1,888.38 | |
| — | 4.00 | — | — | ||
| Supply of ISI Marked Portable Fire Extinguisher (Cartridge Type) as per latest IS- 15683:2018 With Capacity 6Kgs. Suitable for A, B, C class of fire Dry Chemical Powder Type Charged With 90% concentration as per IS-14609/1999 Co2 Cartridge of 120 GM Capacity as per IS- 4947:2006. Body construction: Single Piece Composite/SS/Aluminum body. Warranty Period : Upto 30 months from the date of supply | — | — | — | 8,920.8 | |
| — | 3.00 | — | — | ||
| Supply of fibre glass discharge rod 4600 mm (15ft) up to 33 KV class. | — | — | — | 14,040 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, testing and commissioning of silent Diesel Generator set of 250 KVA capacity complete with diesel engine, brushless alternator, auto mains failure (AMF) control panel, power cables, DG set fitted in acoustic enclosure and mounted on a base plate, and all other accessories, on turn key basis,DG set confirming to Central Pollution Control Board's latest guidelines of CPCB IV+ emission standards effective from 01/07/2023 or latest amended, with on-site maintenance & breakdown support during warrantee period of 02 years as per specifications. | — | — | — | 32,75,179.42 | |
| — | Item Breakup for | details. | — | ||
| Provision of copper Plate type earthing arrangement as per specification. | — | — | — | 17,125.04 | |
| — | Item Breakup for | details. | — | ||
| Supply erection testing and commissioning of LT distribution panel with following configuration 400Amp MCCB 1 nos for incoming and 250 amp 4 nos and 125 Amp 4Nos MCCB for out going as per specification | — | — | — | 1,32,987.26 | |
| — | 1300.00 | — | — | ||
| Supply, fabrication and erection of MS channel/angle/ flat etc. for cross-arm/clamp fan hook, anchor fastner etc. (For DG Set Shed) | — | — | — | 65,715 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of Fire extinguisher 9 Kg capacity (CO2) foam type. | — | — | — | 22,536.54 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing and commissioning of bus duct trunking system of 40A (4+2)conductors, 3ph, 4 wire, IP55 with center/ end feed unit with MCB, straight lengths 3 mtrs with 3 outlets, ceiling bracket holder, suspension clamp, wall bracket, suspension hook, snap clamp etc. All suspension accessories shall be either galvanized or powder coated, detailed specifications. | — | — | — | 78,19,560 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing and commissioning of plug in box/ tap off box of bus duct trunking system to light/ fan points with connecting wire of 3 core x 1.0 sq.mm. in PVC conduit to complete the wiring connection including all material required for fixing arrangement, detailed specifications. | — | — | — | 15,41,550 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing and commissioning of flexible bend of 40A (4+2) conductors for bus duct trunking system, 3ph, 4 wire, IP55, including all necessary components for connecting two ends of bus trunking, detailed specifications. | — | — | — | 23,27,250 | |
| — | Item Breakup for | details. | — | ||
| Design, manufacture, display, erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards etc. in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 µm thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. (The matter as per Rly requirements). | — | — | — | 6,05,410 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of cable junction box 200x160x98mm size with metric knockouts for cable entry with IP 65 protection. | — | — | — | 2,63,005.35 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of heavy duty 25 mm PVC Pipe/conduit. | — | — | — | 1,69,882 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 1.5 sqmm single core multistranded flexible PVC insulated copper wire. | — | — | — | 87,817.5 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 2.5 sqmm single core multistranded flexible PVC insulated copper wire. | — | — | — | 94,764 | |
| — | Item Breakup for | details. | — | ||
| Fabrication, supply, erection, testing and commissioning of double sided glow sign board in three languages of different sizes made out of Poly Carbonate sheets as per detail specification. | — | — | — | 4,62,505.05 | |
| — | Item Breakup for | details. | — | ||
| Design, supply, erection, testing and commissioning of LED station name board with Individual English letter | — | — | — | 1,20,094.92 | |
| — | Item Breakup for | details. | — | ||
| Design, supply, erection, testing and commissioning of LED station name board with Individual Devnagari letter for Hindi & Marathi. | — | — | — | 2,25,520.36 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Super Efficient Electric Ceiling Fan with Electronic Regulator/ Remote for 1200 MM size (48 inch)Three Blades ,power consumption <= 35 watts, in. Air Delivery 220 m3/min, Motor type Brushless DC (BLDC) | — | — | — | 23,29,550.8 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, testing & commissioning of 50 Watt LED fitting midbay type, IP 65 as per specification. | — | — | — | 1,40,46,165 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of LED street light luminaire 45W, IP 66, housing shall be pressure die casted aluminium alloy with higher thermal conductivity corrosion resistant, powder coated, toughened transparent glass cover, secondary lens optics complete as per specification. | — | — | — | 1,69,513.5 | |
| — | Item Breakup for | details. | — | ||
| Design, fabrication, supply and erection of stainless steel safety cage for water cooler. | — | — | — | 5,86,605.6 | |
| — | Item Breakup for | details. | — | ||
| Supply of erection of 5 Meter length octagonal pole hot dip galvanized with 130MM bottom A/F& 70 MM top A/F with 1 Meter long hot dip galvanized single arm standard bracket including foundation as per requirement. | — | — | — | 10,68,643.2 | |
| — | Item Breakup for | details. | — | ||
| Supplying and erecting 2A SP MCB. | — | — | — | 5,794.08 | |
| — | 800.00 | — | — | ||
| Supply, fabrication and erection of MS channel/angle/ flat etc. for cross-arm/clamp fan hook, anchor fastner etc. | — | — | — | 40,440 | |
| — | Item Breakup for | details. | — | ||
| Supplying , erecting , testing and comissioning of Astronomical Street Light Timer with setting of 15 calendar year in weather proof box enclosure in CR sheet 16 SWG, painted, with locking arrangement suitable for Universal time switch with 25 AMP contactor coil voltage 230 volt and 32 AMP, MCB 3 pole having inbuilt short circuit indication (flag) rating 20 A - 32 A for incoming supply, duly wiring for system Make: L&T, Siemens , ABB or similar | — | — | — | 30,319.4 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, testing and commissioning of control panel for automation of Platform lighting arrangement as per specification. | — | — | — | 2,68,152.78 | |
| — | 70.00 | — | — | ||
| Provision of pole earthing with 20 mm dia 'B' class 1.28 mtr long GI pipe. | — | — | — | 39,419.1 | |
| — | 32.00 | — | — | ||
| Provision of earthing with 40 mm dia 'B' class 2.5 mtr long GI pipe. | — | — | — | 43,448.96 | |
| — | Item Breakup for | details. | — | ||
| Provision and erection of 2.5 to 16 sqmm LT cable end termination kit. | — | — | — | 71,678.8 | |
| — | 700.00 | — | — | ||
| Supply fabrication of GI items (GI pole, Channel, angle, flat, clamps nutbots, fan hook, fastener, street light bracket, GI wire Etc.) | — | — | — | 89,817 | |
| — | Item Breakup for | details. | — | ||
| Point wiring for light point/ fan point/ exhaust fan point/ call bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLS grade copper wire, modular type switch, earthing andrequired accessories as per specification. | — | — | — | 1,52,247 | |
| — | Item Breakup for | details. | — | ||
| Wiring of the 5A/5-Pin Universal plug point (4 socket & 4 switch modular type) on separate board with all accessories and running earthing copper conductor as per standard practice. | — | — | — | 38,571.6 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 6/16 A modular switch socket (5 in 1). | — | — | — | 3,294.45 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 4.0 sqmm single core multistranded flexible PVC insulated copper wire. | — | — | — | 2,918 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying 25mm medium duty PVC casing caping/pipe. | — | — | — | 1,150.5 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of single phase 230 V, 225 mm sweep exhaust fan, metal blade and bodyof the exhaust fan should be powder coated, approximate speed 1300 RPM. The exhaust fan isto be fixed with required size 6 mm thick plywood frame along with required hardware atdesired location. | — | — | — | 5,678.45 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of single phase, 230 V, 300 mm sweep, 3 blade exhaust fan, metal blade and body of the exhaust fan should be powder coated, approximate speed 1350 RPM. The exhaust fan is to be fixed with required size 6 mm thick plywood frame alongwith required hardware at desired location. | — | — | — | 8,334.05 | |
| — | Item Breakup for | details. | — | ||
| Supply erection testing and commissioning of wall mounting fans 400mm sweep oscillating type with 3 speed electronic regulator 1350 RPM 3 blades complete with closed mesh guard suitable for use on 230/240v, 50Hz,AC supply confirming to IS No.555/79 or latest. | — | — | — | 7,990.8 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 10 Watt 2 feet led batten fitting. | — | — | — | 4,134.6 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of LED street light luminaire 60W, IP 66, housing shall be pressure die casted aluminium alloy with higher thermal conductivity corrosion resistant, powder coated, toughened transparent glass cover, extruded silicon loop gas cut shall be provided, secondary lens optics complete as per specification. | — | — | — | 46,796.4 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 120 W LED flood light, Ingress protection > IP 65,High Power LED,pressure D-cast aluminum/Extruded aluminum housing , power coated / anodized ,high efficiency toughened lamp cover, secondary lens optics complete as per specification. | — | — | — | 26,930.4 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of distribution board with 63A TPN MCCB & outgoing 4 way per phase with 32 A SP MCB's - 12 nos as per requirment. | — | — | — | 27,162.9 | |
| — | Item Breakup for | details. | — | ||
| Supply & erection of double door TPN DB incoming with 100A TPN MCCB & outgoing 4 way per phase with 32A SP MCBs -12 Nos as per requirment | — | — | — | 27,223.58 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 50 mm OD DWC pipe. | — | — | — | 12,881 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of 90 mm outer dia DWC pipe. | — | — | — | 7,959.5 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, testing, and commissioning of 1 Ton portable AC Make: Blue Star AC PC12DB (Portable) or CRUISE PQ1W12 or equivalent model | — | — | — | 69,990.4 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, testing, and commissioning of 1.5 Ton inverter type high wall Split Air Conditioner with remote, having copper coil, eco-friendly refrigerant, and minimum 5-star BEE rating. Unit shall conform to IS:1391 or latest and have ISEER 5. Includes 3 metre copper piping with insulation and electrical cable. Warranty: 1 year on machine, 10 years on compressor, and 5 years on PCB. Complete in all respects | — | — | — | 1,00,739.56 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, testing, and commissioning of 2.0 Ton inverter type high wall Split Air Conditioner with remote, conforming to IS:1391 (Part 2) or latest, ISEER 5. Unit shall have 5- star BEE rating or higher, 100% copper coil, suitable for R-410A or latest eco-friendly refrigerant. Includes 6 metre copper piping with insulation and electrical cable. Warranty: 1 year on machine, 10 years on compressor, and 5 years on PCB. Complete in all respects | — | — | — | 1,40,778.76 | |
| — | Item Breakup for | details. | — | ||
| SETC of hard copper refrigerant piping size 12.7 mm for suction line (1/2 inches). with 19/13 mm closed cell insulating material class O for insulating the copper pipe lines. The piping system must be supported at suitable distance. Rates to include necessary accessories, fittings, supporting system as required. | — | — | — | 38,411.2 | |
| — | Item Breakup for | details. | — | ||
| SETC of hard copper refrigerant piping size size 6.3 mm for liquid line (1/4 inches) with 19/13 mm closed cell insulating material class O for insulating the copper pipe lines. The piping system must be supported at suitable distance. Rates to include necessary accessories, fittings, supporting system as required. | — | — | — | 38,411.2 | |
| — | Item Breakup for | details. | — | ||
| SETC of hard copper refrigerant piping size 15.8 mm for suction line (5/8 inches) with 19/13 mm closed cellinsulating material class O for insulating the copper pipe lines. The piping system must be supported at suitable distance. Rates to include necessary accessories, fittings, supporting system as required. | — | — | — | 38,411.2 | |
| — | Item Breakup for | details. | — | ||
| — | Item Breakup for | details. | — | ||
| — | 12.00 | — | — | ||
| — | — | — | 24,307.8 | ||
| — | — | — | 60,532 | ||
| — | — | — | 88,811.36 | ||
| Supply and erection of 32A DP MCB 'C' Series,240 V rating, 10 kA breaking capacity, conforming with IS/IEC 60898-1,with sheet steel enclosure having CRC Powder coating and mounting arrangement | — | — | — | 8,897.1 | |
| Supply and installation of BIS-listed semi-automatic stainless steel preventive device with UL-approved clean agent gas with auto/manual reverse stainless steel valve, having a capacity of 4 kg and made of stainless steel 304 grade with Indian Railways logo on each unit and conform to the specification IS 15683:2018 or latest Make & Model: NASA 400 MAR or similar as approved Warranty Period : Upto 30 months from the date of supply | — | — | — | 70,000 | |
| Supply and installation of BIS-listed semi-automatic stainless steel preventive device with UL-approved clean agent gas with auto/manual reverse stainless steel valve, having a capacity of 6 kg and made of stainless steel 304 grade with Indian Railways logo on each unit and conform to the specification IS 15683:2018 or latest Make & Model: NASA 600 MAR or similar as approved Warranty Period : Upto 30 months from the date of supply | — | — | — | 1,12,000 | |
| — | — | — | 34,99,385.05 | ||
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing and commissioning of bus duct trunking system of 40A (4+2)conductors, 3ph, 4 wire, IP55 with center/ end feed unit with MCB, straight lengths 3 mtrs with 3 outlets, ceiling bracket holder, suspension clamp, wall bracket, suspension hook, snap clamp etc. All suspension accessories shall be either galvanized or powder coated, detailed specifications | — | — | — | 27,92,700 | |
| — | Item Breakup for | details. | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AnnexureVA.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AnnexureV.pdf
ATTACHMENT
GCCApril2022.pdf
ATTACHMENT
TenderFormFirstSheet.pdf
ATTACHMENT
ShramikkalyanPortal.pdf
ATTACHMENT
LetterofCredit.pdf
ATTACHMENT
GCCApril2022CorrectionSlipNo.1-10.pdf
ATTACHMENT
TenderBooklet.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .