Supply, Installation, Testing and Commissioning of Fire Fighting Work

Amount

Hydrant and Sprinkler System Pump Room Fire Pump Room Equipment Supply, erection, testing & commissioning of Electrical Motor driven main pump, horizontal centrifugal end suction back pull out type with gland packing and capable to deliver 2850 LPM at 88 MWC. the pump shall be coupled to TEFC motor of suitable HP with speed of 2900 RPM and completw set shall mounted on common base frame. The quoted rate shall includes providing & fixing on coupling, coupling guard, RCC foundation (as recommended by manufacturer) and Foundation bolts / Antivibration mounting etc. (One for main System and common standby pump).

Supply, erection, testing & commissioning of Diesel Engine driven end suction top discharge back pullout centrifugal fire hydrant pump (stand by) capable of delivering 171 CMH water at a head 70 MWC and giving a jet pressure not less than 3.5 kg /sq.cm at the top most / farther hydrant and disel tank, exhaust pipe etc., as required including interconnecting wire cables etc., complete as per relevant IS code. Diesel engine 4 stroke water cooled, electric start, of suitable BHP at 1800 RPM suitable for above output of altmator at 45 Degree C, 50%RH & at 1000 meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10 % over loading for one hour after 12 hours of continuous operation. The same also to be included with the cost of suitable battery with Auto charger for battery required for disel pumps.

Supply, erection, testing & commissioning of electric motor driven Jockey Pump of horizontal centrifugal end suction back pull out type with gland packing and capable to deliver 180 180 LPMat 70 MWC. The pump shall be compled to TFC motor of suitable HP with seed of 2900RPM and complete sat shall mounted on common base frame. The quoted rate Shall includes providing & fixing of coupling, coupling guard, Rcc foundation (as recommended by manufacture) and foundation bolts / Antivibration mountings.

Supply, Erection, testing & commissioning of COMPOSITE MCC PANEL for AUTO operation of pump instalied in pump house.

1100 V GRADE POWER / CONTROL CABLES Supply, laying, testing & commissioning of FRLS, PVC outer sheath, steel armoured, copper conductor, 1100 Volt Grade power cables with gland etc. The cable shall be laid in tray / in trenches / on walls / floors etc. as required. The minimum size the cable shall as mentioned below. 3.5 x 90 sq.mm for main pumps (AI)

4C x 25 sq.mm Jockey Pumps (AI)

12C x 25 sq.mm DG (CU)

2C x 2.5 sq.mm for Instrumentation (Cu)

CABLE TRAY Supplying & fixing of perforated G.I. sheet cable tray with necessary angle iron suspension supports, anchor fasteners etc. compelet Maximum hight of suspension shall not exeed 500 mm. Size the tray shall be suitable for lying the above mentioned cables.

G.I Earth strips of 50mm X 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with necessary accessories as required. (Earth pit shall be executed by other agencies.)

Supply, erection, testing & commissioning of priming Tank with required flanges, nuts, bolts, and gasket etc. complete.

Supply, erection, testing & commissioning of M.S pipe confirming to IS 1239, Hevy grade with painting, suitable type of supports, anchor fasteners, boits nuts (Galvanized), clamps, "U" bolt, malleable specials such as reducers, tees, elbows, flanges including cutting, Welding, Fixing in / on walls, ceiling by using suitable supports etc, as per drawings. The quoted rate shall also cement morter etc. complete. 250 mm nominal dia

200 mm nominal dia

150 mm nominal dia

80 mm nominal dia

65 mm nominal dia

50 mm nominal dia

25 mm nominal dia

Supply, installation, testing & commissioning of CI Non-return valves as per IS : 5312 (PN 1.6) swing check type with requered flanges, nuts, bolts and gaskets etc. complete . 150 mm nominal dia.

65 mm nominal dia.

Supply, installation, testing & commisssioning Gate valves as per IS14846 (PN 1.6) with required flanges, nuts, bolts etc. complete. 150 mm nominal dia.

80 mm nominal dia.

65 mm nominal dia.

Supply, installation, testing & commisssioning of foot Valve / Stainer with flanges, bolts, nuts, washers, gaskets etc. 200 mm nominal dia.

80 mm nominal dia.

Supply, installation of Pressure switches of suitable range for pumpe sets with ball valves, Fittings like unions / Collars / reducers etc.

Supply, installation of Pressure switches of suitable range for pumpe sets with ball valves,siphon, Fittings like unions / Collars / reducers etc.

Hydrant System Supply, installation, testing & commissioning of M.S Pipes confirming to IS 1239 / 3589, Hevy Grade with suitable type of supports, malleable specials such as reducers, tees, elbows, flanges. Including, welding as per drawing. The rate quoted should be included with anticorrosive treatment with 4 mm thick "PYPKOTE" polymer corrosion resistant tape as per IS 10221, overlap shall be 15 mm minimum. 150 mm nominal dia.

80 mm nominal dia.

Supply, Erection, Testing and commissioning of C.I. Non-return valves as per IS: 5312 (PN 1.6) swing check type with required flanges, nuts, bolts, and gaskets etc. complete. 150 mm nominal dia.

50 mm nominal dia.

Supply, Erection, Testing and commissioning of C.I. Gate valves as per IS: 14846 (PN 1.6 Rating) and Non Rising spindle type with flanges, bots, nuts, washers, gaskets etc. 200 mm nominal dia.

150 mm nominal dia.

100 mm nominal dia.

Supplying and fixing approved make 25mm dia. Air release safty valu union, ball valve etc. compelete.

Supplying and installation of perssure guges of suitable range for Raiser Top with Ball valves, siphon, Fittings like union / collars / reducers etc.

Supply, installation, testing & commissioning CI butterfly valves as per BS 5155 (PN 1.6) slim seal standrad type with required flanges, nuts, bolts, etc. complete. 150 mm nominal dia.

80 mm nominal dia.

50 mm nominal dia.

Supply, installation, testing & commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. 25mm dia.

Supply, installation, testing & commissioning of Hydrant valve comprising of the following in Yard pipeline Single headed hydrant valve as per IS 5290, made of SS with 63 mm dia instantaneous outlet of 80 mm dia fanged intel, Blank caps, chain and hand wheels etc. complete.

15 M long, 63mm dia RRL hose with instantaneous couplings and Hoses shall be stored in side the hose cabint.

1 no SS short branch pipe with nozzle.

M.S. Hose cabinet stands mounted type fabricated out of M sheet of 16 swg with glass fronted ( 4mm thick glass with rubber beading ) door and size of the cabinet shall be 750 mm X 600 mm X 250 mm Quoted rate shall be includes suitable stand for mounting all fasteners etc, and cabinet shall be powder coated of approved color both inside and out side.

Supply, installation, testing & commissioning of Hydrant valve comprising of the following in the Landing Stairecase Single Headed hydrant valve as per IS 5290, made of SS with 63 mm dia instantaneous outlet of 80 mm dia fanged intel Blank capes chain and hand wheels etc complete.

15 M long 63 mm dia RRL hose with instantaneous couplings and Hose shall be stored in side the hose cabinet.

1 no. SS short branch pipe with nozzie.

M.S Hose cabinet stands mounted type fabricated out of M sheet of 16 swg with glass fronted (4 mm thick glass with rubber bending) door and size etc and cabinet shall be powder coated of approved color both inside and out side.

Supplying, installing and commissioning of fire bigade inlet connection of 4 way with 4 nos 63 mm dia. built- in S.S Non-retrun valves instantaneous coupling type arranged on 150 mm dia. pipe manifold and connectedto wet riser main quated rate shall be included with mounting supports etc complete.

Hose reel drum of swinging type with 19 mm dia Rubber braided hose of 30 M. Lengthwith Gate valve (upstream ) and Shut off nozzle complete.

AUTOMATIC SPRINKLER SYSTEM Supplying, Installing, testing and commissioning of MS Pipes confirming to IS 1239/3589, Heavy grade with suitable type of supports, malleable specials such as Reducers, Tees, elbowa,flages, includings, cutting, welding as per drawings. The rate quoted should be included with anticorrosive with 4 mm thick "PYPKOTE" polymer corroain resistant tape as per 10221, overlap shall be 15 mm minimum. 150 mm nominal dia

100 mm nominal dia

80 mm nominal dia

65 mm nominal dia

50 mm nominal dia

40 mm nominal dia

32 mm nominal dia

25 mm nominal dia

Supplying, installing, testing and commissioning NRV valves as per BS5155 (PN1.6) slim seal standard water type with required flanges, nuts, bolts etc. complete. 100 mm nominal dia

Supplying, installing, testing and commissioning CI butterfly valves as per BS5155 (PN1.6) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete. 100 mm nominal dia

50 mm nominal dia

Supplying, Istalling, testing and commissioning conventional sprinkler quartzoid bulb type with 15 mm screwed end connection of 68 deg. C. temperature rating and orifice shall not be less than 6 mm. Sprinkler shall be UL Listed /FM approved with Chrome finished. Pendent sprinkler

Supplying, installing, testing and commissioning of hydraulicallly operated sprinkler control valve, with water motor gong bell and trimsas required, pressure gauges, drain valves, ball valves check valves, strainers etc. complete. Alam valve shall be UL Listed / FM approved. 150 mm dia

100 mm nominal dia

Supplying, installing, testing and commissiong of Gun metal chrome finished ball valves with fittings of screwed end type. 25 mm dia

Supplying and fixing approved make 25mm dia. Air release safty valu union, ball valve etc. compelete.

ESTINGUISHER Supplying , installing, testing and commissionong of portable type Extinguisher: co2 type Fire extinguisher (4.5 kg) with fixing arrangements.

Suplying, installing, testing and commissiong of ABC type fire extinguisher (6.0 kg) with fixing arrangements.

Supplying, installing, testing and commissioning of AFFF type Fire Extinguisher.

SAFETY ENGINEERS AND CONSULTANCY

MAGNUM SAFETY INDIA