Development of Ropeway Project at Ibudhou Marjing, Heingang Imphal East, Manipur SH B-Ancillary works viz. Civil works, Electrical works, Development works, Fire Extinguisher etc.

Amount

EARTH WORK

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

Providing, laying naturally occurred sand gravel -III free from organic or other deleterious constituants including watering ramming,consolidating in layers not exceeding 150mm (Spread thickness)and dressing etc. complete as directed by the Engineer-in-charge

CONCRETE WORK

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (a) C.C. 1:4:8 (1 cement :4 Kanaighat coarse sand :8 graded stone aggrt. 40mm nominal size).

REINFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

(b) Thermo-Mechanically Treated bars.

FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(b)Columns, pillars, posts and struts (square, rectangular or polygon in plan

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(e)Edges of slab and breaks in floor not exceeding 1m in depth

BRICK WORK

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 Kanaighat coarse sand) in superstructure.(i) Above plinth level upto 1st floor level.

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanaighat coarse sand)

WOOD WORK

Providing & fixing local best quality plain lining tongued & grooved on & i/c wooden plug complete with necessary screws & priming coat on unexposed surface.a) 19mm thick (ii) Local best quality teak

SH : STEELWORK

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

P/F rolling shutters of approved made of 80 mm wide M.S. iaths interlocked together through their entire length or jointed together at the end by end bracket plates (guides) channed of arrangment for inside and outside locking with push pull operation completes but e/c the cost of hood cover and spring (a) shutters having width below 3.5 m.

Providing and fixing 27.5 cm long wire spring grade no. 2 for rolling shutters .

P/F hood cover for rolling shutters (a) shutters having width below 3.5 m

P/F ball bearing for rolling shutters

Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel .

P/F M.S. sheet 1 mm thick as eave broad welded by M.S frame of ISA 25x25x3mm and flat bars 25x3 mm i/c painting etc complete

FLOORING

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved make , in all colours & shade ,in laid on 20 mm thick cement mortar 1:4 ( 1 cem : 4 Kanhaighat coarse sand ) , i/c grouting the joints with white cement and matching pigments etc complete.1.1) Size of tile 600x600 mm (Double charged) Branded

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved brand and manufacturer , in all colours & shade ,in skirting , riser of steps,over 12 mm thick bed of cement mortar 1:3( 1 cement: 3 Kanhaighat coarse sand),including grouting the joint with white cement & matching pigmnets etc.complete. 1.1) Size of tile 600x600 mm (Double charged) Branded

SH : ROOFING & CEILING

Trepezoidal pre- painted profile sheet roofing of approved brand dyna roof or equivalent with selt driling srews of 68 mm long xylon coats screws with pvc washer and caps complete excluding the coat of purlin and truss. A) pre painted galvalume sheet (PPGL) (i) profile sheet 0.50 mm 14.2 kgs per SQM

Trepezoidal pre- painted profile sheet roofing for ridges /gutter or valley 610 mm wide approved brand dyna roof or equivalent fixed with selt driling srews of 68 mm long xylon coats screws with pvc washer and caps complete excluding the coat of purlin and truss. A) pre painted galvalume sheet (PPG) (i) profile sheet 0.50 mm 14.2 kgs per SQM

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special section, power pressed from MS sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide X 1.6 mm thick with flages of 27mm and 30 mm long, the perimeter of ceiling fixing to wall/partition with the help of rawl plugs at 450 mm centre with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to i) Fully Perforated Gypsum Plaster Board of size 1200X2400X12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer-in charge.

SH : TUBULAR TRUSS/STEEL WINDOWS

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrome primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete. (a) Electric resistant welded tube 9 Conforming to IS : 1611 - 1979).

FINISHING

12mm cement plaster 1:4 (1 cement : 4 Kanaighat coarse sand).

15mm cement plaster 1:4 (1 cement : 4 Kanaighat coarse sand).

15 mm cement plaster 1:3(1 cement:3 Kanaighat coarse sand)finished with a floating coat of neat cement.

Painting on wall with (two coats) of Dulux Acrylic emulsion(Supreme 3 in 1) paint or equivalent of approved quality in all shades on new work to give an even shade.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Varnishing (two or more coats) with superior Copal varnish of approved quality i/c sizing on new work.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 Kanaighat coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 c/sand (Kanaighat) :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

SH: 2 Construction of Public Utilities

EARTH WORK

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

Providing, laying naturally occurred sand gravel -III free from organic or other deleterious constituants including watering ramming,consolidating in layers not exceeding 150mm (Spread thickness)and dressing etc. complete as directed by the Engineer-in-charge

CONCRETE WORK

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (a) C.C. 1:4:8 (1 cement :4 Kanaighat coarse sand :8 graded stone aggrt. 40mm nominal size).

(b) 1:3:6 (1 cem :3 Kanaighat coarse sand:6 graded stone aggrt.40mm n/size).

(a) 1: 2 : 4 (1 cem : 2 Kanhaighat coarse sand : 4 graded stone aggrt.40mm n/size).

REINFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

(b) Thermo-Mechanically Treated bars.

FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(b)Columns, pillars, posts and struts (square, rectangular or polygon in plan

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like (i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

BRICK WORK

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 Kanaighat coarse sand) in superstructure.(i) Above plinth level upto 1st floor level.

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanaighat coarse sand)

(i) above plinth level upto 1st floor level in superstructure

WOOD WORK

Providing wood work in frames of doors, windows, c/windows & other frame and fixed in position.(a)Local best quality Teak wood.

Providing and fixing 38mm thick panelled and glazed or panelled and glazed shutters for doors, windows, c/windows ect. Including bright finished brass hinges with necessary screws-(a) Local best quality Teak Wood

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

Providing and fixing Brass sliding bolts bright finished or black enamelled with nuts & screws etc. complete. (a) 300 x 16 mm

P/F Brass Tower bolts with screws & nuts complete,(a) 250x10 mm

P/F Brass Handles with screws & nuts complete,(a) 125mm

SH : STEELWORK

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

P/F M.S. sheet 1 mm thick as eave broad welded by M.S frame of ISA 25x25x3mm and flat bars 25x3 mm i/c painting etc complete

FLOORING

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved make , in all colours & shade ,in laid on 20 mm thick cement mortar 1:4 ( 1 cem : 4 Kanhaighat coarse sand ) , i/c grouting the joints with white cement and matching pigments etc complete.1.1) Size of tile 600x600 mm (Double charged) Branded

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved brand and manufacturer , in all colours & shade ,in skirting , riser of steps,over 12 mm thick bed of cement mortar 1:3( 1 cement: 3 Kanhaighat coarse sand),including grouting the joint with white cement & matching pigmnets etc.complete. 1.1) Size of tile 600x600 mm (Double charged) Branded

SH : ROOFING & CEILING

Trepezoidal pre- painted profile sheet roofing of approved brand dyna roof or equivalent with selt driling srews of 68 mm long xylon coats screws with pvc washer and caps complete excluding the coat of purlin and truss. A) pre painted galvalume sheet (PPGL) (i) profile sheet 0.50 mm 14.2 kgs per SQM

Trepezoidal pre- painted profile sheet roofing for ridges /gutter or valley 610 mm wide approved brand dyna roof or equivalent fixed with selt driling srews of 68 mm long xylon coats screws with pvc washer and caps complete excluding the coat of purlin and truss. A) pre painted galvalume sheet (PPG) (i) profile sheet 0.50 mm 14.2 kgs per SQM

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2 (1 cement : 2 Kanhaighat fine sand) a) 150 mm diameter.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm X 112.5 mm of 1:2:4 mix (1 cement:2 coarse sand:4 hard stone bollast 20 mm & down gauge). a) 150 mm diameter.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement:2 fine sand). a) 150 mm diameter.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special section, power pressed from MS sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide X 1.6 mm thick with flages of 27mm and 30 mm long, the perimeter of ceiling fixing to wall/partition with the help of rawl plugs at 450 mm centre with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to i) Fully Perforated Gypsum Plaster Board of size 1200X2400X12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer-in charge.

SH : TUBULAR TRUSS/STEEL WINDOWS

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrome primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete. (a) Electric resistant welded tube 9 Conforming to IS : 1611 - 1979).

FINISHING

12mm cement plaster 1:4 (1 cement : 4 Kanaighat coarse sand).

15mm cement plaster 1:4 (1 cement : 4 Kanaighat coarse sand).

15 mm cement plaster 1:3(1 cement:3 Kanaighat coarse sand)finished with a floating coat of neat cement.

Painting on wall with (two coats) of Dulux Acrylic emulsion(Supreme 3 in 1) paint or equivalent of approved quality in all shades on new work to give an even shade.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Varnishing (two or more coats) with superior Copal varnish of approved quality i/c sizing on new work.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 Kanaighat coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 c/sand (Kanaighat) :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

Sanitary item

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :a) one urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws

Providing and fixing C.P. brass toilet paper holder

P/F 110 mm PVC soil waste and vent pipe

P/F 75 mm PVC soil waste and vent pipe

P/F 110mm PVC plain bend of required degree

P/F socket joints to 110 mm PVC pipes

P/F plain Tee to 110 mm PVC pipes

P/F Vent Cowl joints.75 mm

Providing and fixing C.I. cover with frame for (manhole and chamber). (a) 600 X 450 mm (Heavy duty) ( 38 kg).

Providing and fixing brass bib cock of approved quality. 25 mm diameter (Swan neck left/right HN Delux)

Providing and fixing brass stop cock of approved quality.50mm diameter

Providing and fixing brass full way G.M valve with CI wheel of approved quality.50 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 25 mm nominal outer dia Pipes

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. (a) 2000 litres net capacity storage tanks

SH:- 3 Compound fencing Type A

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

SH : CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Kanhaighat coarse sand:: 10 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand: : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforcement for R.C.C.work including bending,binding and placing in position complete

Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply) (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

(d) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanaighat coarse sand)

2nd class (local first class) brick work in superstructure above plinth level upto 1st floor level in cement mortar 1:4(1 Cem:4Kanhaighat coarse sand:)

12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:).

15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:).

Applying one coat of cement primer of approved quality on wall surface.

Providing and applying wall putty/plaster of paris putty of 2 mm thickness over plaster surface to prepared the surface even and smooth complete.

Finishing walls weather shield paint of approved quality on new work ( three or more coats ) to give an even shade.

Providing M.S. Grill by using 40x40 mm sq. bar as main bars horizontally and vertically , 25 x 25 mm Sq. bar as intermediated bars and M.S. Flat 25 x 3 mm mm as styles bar , connecting bar sq 16x 16 mm to arow of decorative type available at the market as styles and providing decorative arrows type ( cast iron ) readily available at market i/c priming , painting etc completed as per direction of Engineer -in-charge conforming to the Architectural Drawing no MPHC/A-C1/271(A)

SH:- 4. RCC Retaining wall

SH : EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

SH : CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).

(b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm n/size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand: : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including bending,binding and placing in position complete (b) TMT bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(d) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(g) Vertical surface such as walls (any thickness), partition and the like including attached pilasters, buttresses, plinth and the string courses and the like

Providing weep holes in plain Concrete/ Reinforced Concrete abutment, wing wall/return wall complete as per drawing and technical specification

Steel welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint (a) In grating, framed guard bars, ladders, raillings, brackets and similar works.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

SH:- 5 Parking

SH : EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

SH : CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforcement for R.C.C.work including bending,binding and placing in position complete (b) TMT bars.

Providing and laying & compacting granular base/sub-base according to lines, grades & cross-sections by using naturally occuring sand gravel/conforming to IRC Grade - 2 of M.O.S.T. specification free from organic or other deleterious constituent compact by rolling with power roller of 8 to 10 tonnes capacity in layers not exceeding 150 mm (spread thickness) including rolling of the road surface to proper level & grade 30 cm width edging on both sides etc. complete as directed by the Engineer-in-charge

Providing and laying 80 mm thick factory made cement concrete interlocking paver block (Rubber Moulded ) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and filling the joints with cement mortar 1:3 (1 cement : 3 kanhaighat coarse sand) all complete as per the direction of the engineer-in -charge.

SH:- 6 Drain

SH : EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

SH : CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).

(b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm n/size).

STONE WORKS

Polygonal rubble masonry ( uncoursed / brought to courses ) squared rubble masonry (uncoursed /brought to courses ) with hard stone of approved quality in foundation & plinth in cement mortar 1: 6 (1 cement:6 coarse sand) i/c levelling up with cement concrete 1:6:12 (1 cement:6 coarse sand:12 stone aggregate 20 mm nominal size) at plinth level.

15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished with a floating coat of neat cement.

SH 2 :- Intermediate Drain

SH : EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

SH : CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforcement for R.C.C.work including bending,binding and placing in position complete (b) TMT bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished with a floating coat of neat cement.

Steel Work welded in built up sections framed work,i/c cutting,hoisting,fixing in position & In gratings,framed guard bars, ladders,railings,brackets and similar works applying a priming coat of red lead paints. (h) In gratings, framed guard bars, ladder, railling, brackets and similar works

SH:- 7 Road Work

Earth work in excavation in hill cutting including disposal of excavated earth lead upto 50 metres and lift upto 1.5 metres disposed earth to be leveled and neatly dressed.Hard/Dense Soil.

Providing and laying & compacting granular base/sub-base according to lines, grades & cross-sections by using naturally occuring sand gravel/conforming to IRC Grade - 2 of M.O.S.T. specification free from organic or other deleterious constituent compact by rolling with power roller of 8 to 10 tonnes capacity in layers not exceeding 150 mm (spread thickness) including rolling of the road surface to proper level & grade 30 cm width edging on both sides etc. complete as directed by the Engineer-in-charge

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specifications including premixing the material with water at OMC in mechanical mix (Pug Mill), carraige of mixed material by tipper to sie laying in uniform layers in sub- base / base course on well prepared underbase and compacting with power vibratory- roller to achievethe desired density including lighting,guarding,barrricating and maintenance of diversion etc.

Preparing surface by brushing with wire brushes for remaining caked mud etc. sweeping with brooms and finally fanning the cleared surface with gunny bags to removed all loose dirt etc.

Providing & applying evenly a priming/tack coat with bitumen (80/100). (a) 10 kg/10sqm

Providing and laying bituminous macadam of 50 mm as per clause 504.1 of "MOST" specification for base course with binder content @ 4% by weight of total mix including preparation of bases including filling of pot holes, cleaning the surface with wire brushes etc. and providing suitable edge supports heating of binder and aggregate handling of materials, screening, mixing, in hot mix plant conforming and transporting laying and finishing with paver finisher to the required level, grade and camber, rolling by power roller etc. complete including running expenses of all plants.

Premix seal coat IRC type "B" with 0.06 cum of fine aggregate and 6.8 kg of bitumen per 10.00 sqm of road surface.Using bitumen (80/100)

SH:- Contruction of Gate with Steel shutter

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

(b) Lift above 1.5 m upto 3.0 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

SH : CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Kanhaighat coarse sand:: 10 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand: : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including bending,binding and placing in position complete

Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply) (a) Foundation footings, bases of columns etc. and mass concrete.

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanaighat coarse sand)

2nd class (local first class) brick work in superstructure above plinth level upto 1st floor level in cement mortar 1:4(1 Cem:4Kanhaighat coarse sand:)

12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:).

Applying one coat of cement primer of approved quality on wall surface.

Providing and applying wall putty/plaster of paris putty of 2 mm thickness over plaster surface to prepared the surface even and smooth complete.

Finishing walls weather shield paint of approved quality on new work ( three or more coats ) to give an even shade.

Providing and fixing steel gate by using 50x50 mm hallow sq. bar as main bars horizontally and 40x40 mm hallow sq. bars intermediate , 25 x25 mm solid sq. bar vertical member , M.S. Flat 25 x 3 mm mm as styles bar ,connecting bar sq 16x 16 mm to arow of decorative type available at the market as styles and providing decorative arrows type ( cast iron ) readily available at market i/c priming , painting etc completed as per direction of Engineer -in-charge conforming to the Architectural Drawing no MPHC/A-C4-584

SH:-9 Construction of water tank 15000 litre capacity with over head tank

SH : EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

SH : CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:3:6 (1 cem :3 Kanhaighat coarse sand:: 6 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5Kanhaighat coarse sand: : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including bending,binding and placing in position complete (b) TMT bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(b) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

( d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floors and walls (i) Under 20cm wide

(g) Vertical surface such as walls (any thickness), partition and the like including attached pilasters, buttresses, plinth and the string courses and the like

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 Kanaighat coarse sand) in superstructure.(i) Above plinth level upto 1st floor level.

Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint .(i) In gratings, framed guard bars, ladders, railings, brackets and similar works.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:).

15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:).

15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished with a floating coat of neat cement.

Applying one coat of cement primer of approved quality on wall surface.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

Providing and applying wall putty/plaster of paris putty of 2 mm thickness over plaster surface to prepared the surface even and smooth complete.

Finishing walls weather shield paint of approved quality on new work ( three or more coats ) to give an even shade.

P/F C.I cover with frame for (manhole and chamber) (a) 600x450mm (Heavy duty)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 25 mm nominal outer dia Pipes

Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.2000 litres net capacity storage tanks

SH:10 Construction of main gate

EARTH WORK

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

(b) Lift above 1.5 m upto 3.0 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

Providing, laying naturally occurred sand gravel -III free from organic or other deleterious constituants including watering ramming,consolidating in layers not exceeding 150mm (Spread thickness)and dressing etc. complete as directed by the Engineer-in-charge

CONCRETE WORK

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).

REINFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

(b) Thermo-Mechanically Treated bars.

FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(b)Columns, pillars, posts and struts (square, rectangular or polygon in plan

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(c) Flat surfaces such as suspended floor, roofs landings and the like

(e)Edges of slab and breaks in floor not exceeding 1m in depth

BRICK WORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanaighat coarse sand)

2nd class (local first class) brick work in superstructure above plinth level upto 1st floor level in cement mortar 1:4(1 Cem:4Kanhaighat coarse sand:)

SH : STEELWORK

Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint .(i) In gratings, framed guard bars, ladders, railings, brackets and similar works.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Providing and fixing stailess steel (Grade 304) railing made of hollow tubes, channels, plates & fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fashner, stainless steel bolts etc. of required size, on the top of the floor to the side of waist slab with suitable arrangement approval of Engineer-in-charge, (for payment purpose only weight of stainless steel member shall be consider excluding fixing accessories such as nuts, bolts, fastners etc.

FLOORING

Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm

FINISHING

12mm cement plaster 1:4 (1 cement : 4 Kanaighat coarse sand).

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Boring ,providing and installation bored cast-in-situ reinforced cement pile of specified diameter and length below the pile cap M 20 in cement concrete, to carry a safe working load not less than specified ,including the cost of steel reinforcement , the cost of boring with catching and / or bentonite solution and the length of pile to be embeded in the pile cap etc. all completed (Length of the pile for payment shall be measured up to top of pile cap i/c dismantling of cast pile for 1.00 m at the top ).i) 450 mm diameter pile for 18.00 metre.

SH: 11 Construction of culvert

EARTH WORK

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

CONCRETE WORK

Cement concrete 1:4:8 mix with stone aggregate 40 mm nominal size in foundation upto a depth of 1.5 metres below ground level and upto height of 1.5 m above ground/bed level.

Cement concrete 1:3:6 mix with stone aggregate 20 mm nominal size mechanically mixed and vibrated in foundation upto a depth of 1.5 m below ground level and 1.5 . Above ground/bed level i/c formwork.

REINFORCED CEMENT CONCRETE WORK

Reinforced cement concrete M 20 mix with stone aggregate 20 mm nominal size mechanically mixed and vibrated for reinforced concrete work in slab excluding steel reinforcement, but including centering and shuttering laid in position.

Reinforced cement concrete M 20 mix with stone aggregate 20 mm nominal size mechanically mixed and vibrated for bed plates excluding steel reinforcement, but including centering and shuttering laid in position.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete. (b) Thermo-Mechanically Treated bars.

(SH:- 11 Construction of Foot ball Turf)

Providing and fixing of high tech football court of Ground size 25X40 sqft with the following specifications.(A)Football turf specifications Pile Height 50 mm Gauge 5/8 Stitch Rate 15/10 cm Dtex 14000 Density 9450 Backing Triple layer + Green Sbr Yarn Type 100% fresh PE (Stem Shape) with UV resistance Colour 2 Tones Roll Width 4 Mts. (2mts. X 2mts. Dual Shade) Brand Bellinturf, Vietnam Certification Fifa Quality Pro. (B) Football turf layingWhite lines: football turf laying, tufted line marking and infill filling including all the materials and labour.(C)Football court civil works Synthetic turf platform: Boundary wall using RCC belt, playing area filling by using 40mm, 20mm and 6mm gravels. Drainage system:

Fixing of Holed PVC pipes for rainwater drainage in the required level. Industrial work: All being ISI certified; Fixing of 4” X 4” square poles at a height of 7metres from the ground level and required number of fabricated poles as per the guidelines of engineer in charge. RCC foundation work for Industrial leg bottom at a depth of one meter, H frames in the top using 1.5” X 1.5” square pipes, two cross bars using 3” X 1.5” rectangle pipes.Fixing of 2 doors with 3.5 metres height and 1 metre width using 3” x 1.5” rectangle pipes. Industrial legs will be covered by using 10mm cushion at a height of 1.8 metres. Cushion will be covered by premium rexin clothes. Painting: Painting of whole industrial frames using MRF epoxy paint after applying zinc chromate primer. Net covering: Fixing of UV treated ‘garware’ brand, black colourbraided net having 2.5 mm thickness and

50 mm mesh in the sides. UV treated ‘garware’ brand black colour twisted net with 1.5 mm thickness and 40 mm mesh on the roof. Wiring: Includes electrical panel board, control switch, lightening DB, 6mm copper wire, all necessary cabling and electrical work. Lighting: Fixing of LED lamp 200 watts having two years warranty in the required level keeping the optimum level of brightness. Goal posts: Making of One set of goal post using 4-inch round pipes, included UV treated ‘garware’ brand white braided goalpost nets having 5 mm thickness and 100 mm mesh.

Providing and fixing of Play ground given below:- a) Single unit multi Activity Play Systems, b) Horizontal Toddler swing, c) 6 seater FRP Mary Go Round, d) Fire Engine, e) Swing, f) mother child swing 7' height and 6' width, g) Delux 2 seater Sea Saw, h) Roto tunnel Slide,i) Roto double slide, j) Roto straight Slide, k) Jumble climber,l) UFO climber, m) Stepped ladder, n) 2 seater arch swing, o) Square deck, p) Tipper bridge, q) cross railing, r)window railing,s) X and O game, t) Lift canopy, u) Arch canopy, v) Tile canopy

B. ELECTRICAL COMPONENTS

(SH: 1 Providing and installation of 100KVA Distribution Transformer and 100KVA D.G. Set.)

Installation of Transformer

Providing & Installation of 11/0.4 KV 100 KVA Distribution Transformer i/c 2 nos. of 9m steel tubular poles, channels,angles,clamps, A.B. switch, D.B. box,sub-station earthing, sub-station fencing, energy meter, danger board, lightening arrestor and pole muffling complete set etc as reqd.

S/F swaged type steel tubular pole 8 mt.long as per 410-SP-14 conforming to IS-2713 (Pt-II) 1980 with bracket in cement concrete 1:3:6 (1 cem.:3 c/sand : 6 gr. St. 40mm n/size) foundation i/c excavation and refilling etc. as reqd.

S/F 7/2.59 ACSR over head conductor cable.

Supply and drawing of AB cable of size (3x50+1x35)mm2

S/F L.T. cross arm 50X50X6mm - 4 wires

S/F L.T. cross arm 50X50X6mm - 2 wires

S/F back clamp for L.T. pole

S/F L.T. porcelain shackle insulator with pin and clamp etc.as reqd.

S/F stay set complete with stay wire & stay insulator etc.as reqd.

SITC LED Street Light 60W 757K made of pressure dia housing with toughned glass and individual high power LED with secondary optics IP66 protection & impact resistance of (Havells) ENDURAPEARLPLUSL60W complete with all accessories i/c connection etc. as reqd.

S/F 2'' dia. G.I bracket 2.50mts long.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

50mm2 3.5 core PVC ins.(heavy duty) Al.cond.armoured cable of 1.1KV grade of size not exceeding 25mm2 but not exceeding 125mm2 direct in ground i/c excavation sand, cushioning protective covering & refilling etc.as reqd.

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Diesel Generator Set

Design, supply, installation testing and commissioning of L.T.Panel board of dust and vermin proof mounted with thickness of 16 SWG metal clad sheet with suitable for use at 3- Phase, 4 pole,50 Hz 415V fitted with the following switch gears of four way outgoing conforming to IS/IEC:60947-2, HSN Code 8537 :-

1. 200 amp. TPN on load changeover switch - 1 No.

2. 200 amp. TPN bus bar chamber - 1 No.

3. 125 amp. TPN thermal adjustable MCCB - 4 Nos.

Solar Street lamp

Solar LED street lamp All-In-One with in built SCC system wattage of 30 W of make Crompton Greaves Ltd.code no CSADEMP25/30CDL, 140 Lumen/ Watt high efficiency crystaline solar SPV panel

(SH:2 Fire Extinguisher)

Providing and fixing store pressure ABC fire extinguishers consisting of welded M.S. cylindrical body squeeze lever discharge valve 30 cms long high pressure discharge nose, discharge nozzle, suspension bracket, ISI marked as per IS:13849 finished externally with red enamel paint and fixed to wall with bracket complete with internal charges. capacity 6 kg.

Providing and fixing fire extinguishers consisting of welded M.S. cylindrical body squeeze lever discharge valve fitted with internal discharge tube,30 cms long high pressure discharge nose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with bracket complete with internal charges. capacity 4.5 kg.

(Sh:3 Providing IEI in the Upper Yard and Lower Yard).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with modular type switch and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC sassing & capping etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) bladesetc.as reqd. (Make Bajaj/Usha/Crompton/Orient)

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

S/F 12W LED bulb.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

SITC 160 watt LED High bay with excellent heat sink along with IP66 protection perfect solution for outdoor applications i/c connections etc. as reqd. Havells JETAIRISFLS 160W LED 757 PW BLTG.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(Sh:4 Providing IEI in the Public Utilities 2 Nos.).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with modular type switch and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group B

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC sassing & capping etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 12W LED bulb.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

P/F 30 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 4 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(SH:5 Providing IEI in the Shopping Arcade 2 Nos.).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with modular type switch and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC sassing & capping etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) bladesetc.as reqd. (Make Bajaj/Usha/Crompton/Orient)

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

S/F 12W LED bulb.

SITC 160 watt LED High bay with excellent heat sink along with IP66 protection perfect solution for outdoor applications i/c connections etc. as reqd. Havells JETAIRISFLS 160W LED 757 PW BLTG.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(SH: Providing IEI in the Main Gate).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed pvc conduit with modular type switch, modular plate suitable size GI-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

(a) 5/6 amps switch

(b) 5/16 amps switch

© 15/16 amps switch

(d) 6 pin 15/16 amps socket outlet

SITC 35 watt LED 730 PSYMTOPC VICTORIA IP/65 for out door post top lantern and GI pole dia. 76mm standard colour i/c painting etc. as reqd. (Havells).

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

P/F 30 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Th Bimolchand Luwang

Yumkham Subhaschandra Meetei